Digital Electronics PS3650A-T42, PS3650A-T42-24V, PS3651A-T42, PS3651A-T42-24V, PS3650A-T42S Installation Manual

1

PS-3650A/PS-3651A

Installation Guide

Package Contents

(1) PS-A Unit (1)
(2) English and Japanese Installation Guides

(one of each) <This Guide>
(3) Warning/Caution Information (1)
(4) Installation Gasket (1) (attached to the

PS-A unit)
(5) Installation Fasteners (Set of 4)

(6) USB Cable Clamp (2 ports) (2)

(7) Power Plug (1)

• Be careful when installing the PS -A not
to damage the built-in HDD.

This unit has been carefully packed, with
special attention to quality. However, should
you find anything damaged or missing,

please contact your local PS-A distributor
immediately.

When you order a PS-A unit built to your
specifications, the PS-A package should
include an Installation Guide for any optional
items included. Please use that guide to check
that all components are included in each
optional item's package.

About the Manual

For detailed information on PS-A series, refer
to the following manuals.

• PS-3650A/PS-3651A Series Hardware
Manual

• PS-3650A/PS-3651A Series
Reference Manual

• PS-3650A/PS-3651A Series
API Reference Manual

Manual can be downloaded from Pro-face
Home Page.

URL
http://www.pro-face.com/otasuke/

• The drivers and utilities for PS-A can be
downloaded from Pro-face Home Page.

This Installation guide is for the following
models:

• PS3650A-T42

• PS3650A-T42-24V

• PS3651A-T42

• PS3651A-T42-24V

• PS3650A-T42S

• PS3650A-T42S-24V

• PS3651A-T42S

• PS3651A-T42S-24V

Please refer to related manuals or installation
guides for PS-3650A/3651A Series that are
not listed above.

Caution

Be sure to read the “Warning/Caution
Information” on the attached sheet before
using the product.

AC type

(5.08mm[0.2in.]

pitch)

DC type

(7.62mm[0.3in.]

pitch)

2

Part Names and Functions

Name Description
A Display Display Area
B Touch Panel User input is available by means of touching the panel.

C

Power LED / Status Lamp
(POWER)

The lamp shows the st atus of the PS-A’s power an d operat ion.
The display colors and their details are as follows.

D

DISK Access Lamp
(DISK)

The lamp shows the status PS-A’s DISK access and battery
operation. The display colors and their details are as follows.

E Front Cover

-

F

Hardware Reset Switch (R ES E T)

Restart PS-A.

E Front USB Interface (U SB )

1 port. Complies with USB 1.1. Uses a “TYPE-A” connector.

Front

A,B
C
D

E

F
G

LED PS-A Status

Green (lit)

Normal Operation

(power is on)

Green (blinking) Soft OFF state

Orange (lit) System monitor error

Orange/Red

(blinking)

Backlight burnout is detected

Not lit Power is OFF

LED PS-A Status

Green (lit) When HDD or IDE is accessed

Not lit When neither HDD nor IDE is accessed

Orange (lit) PS-A is in operation with backup battery

Red (lit) PS-A is in suspension with backup battery

Power supply voltage DC 5V ±5%
Output current

Each port: 500mA(max.),
5 ports total: 500mA(max.)

The maximum
communication dis tance

5m

3

Name Description

H Power Switch Supported by AC type only.

I Power Connector

For connection, install a power plug, which is one of accessories,
to the power cable.

J Mask Cover

-

K Expansion Board Base PS-3650A Series only.

L Expansion Board Cover

The PCI board installati on in ter fa c e is lo cate d in the cover
opening.
PS-3650A Series only

M Expansion Board Supp or ter PS-3650A Series only

N Fan Unit PS-3650A Series only

O Memory Slot Cover PS-3651A Series only

P DISK Cover PS-3651A Series only

Q USB Interface (USB)

Side: comply with USB 2.0 (4 ports). “TYPE-A” connector.

R PCMCIA Slot Cover 1 slot under the cover. Complies with Type II.

PS-3650A Series

I

H

L

J

Q

R

N

Rear

Side

I

J

O

KM

PS-3651A Series

P

PS-3650A Series PS-3651A Series

Q

R

Power supply voltage DC 5V ±5%
Output current

Each port:500mA(ma x.),
5 ports total:500mA(max.)

The maximum
communication dis tance

5m

4

• When attaching peripheral units to the PS-A, be sure the PS-A's power cord is
disconnected from the main power supply.

General Specifications

 Electrical Specifications

Name Description

S Ethernet Interface (LAN2)

10BASE-T/100BASE-TX /1000BASE-T Auto Cha ngeover . This
interface uses an RJ-45 type modular jack connector.

T Ethernet Interface (LAN1)

10BASE-T/100BASE-TX Auto Changeover. This interface
uses an RJ-45 typ e modular jack connector.

U

Speaker Output Interface
(SPEAKER OUT)

Mini jack connector.

V

RAS Interface (RAS)

RAS port type
2ch General-Purpose Input/Ou tput. D-Sub 9-pin socket type.

Serial Interface (COM2)

Serial 2 port type
D-Sub 9-pin plug. RS-232C compliant (RI Only).

W Serial Interface (COM1) D-Sub 9-pin plug. RS-232C, RS-422, RS-485 Changeover.
X CF Card Interface Cover

CF card interface i s under the cover . T yp e II-compliant slot, or T ype
1 x 1 slot.

Y Expansion Slot PS-3650A Series only.

AC Power Supply DC Power Supply

Power Supply

Input Voltage AC100/240V DC24V
Rated Voltage AC85 to 265V DC19.2 to 28.8V
Rated Frequenc y 50/60Hz

-

Allowable Voltage Drop

1 cycle or less (V oltag e drop interval
must be 1s or more.)

5ms or less

Power Consumption

PS-3650A Series: 110VA or less
PS-3651A Ser ies: 95VA or less

PS-3650A Series: 80W or less
PS-3651A Series: 40W or less

In-Rush current
(room temperat ure)

AC100V : 30A or less
AC240V : 50A or less

30A or less

Voltage Endurance

AC1,500V

20mA for 1minute

(between charging and FG te rminals)

AC1,000V

20mA for 1 minute

(between charging and FG terminals)

Insulation Resistance DC500V 10MΩ (min.) (between charging and FG terminals)

S

Bottom

PS-3650A Series

TU V W XSTUV W X

PS-3651A Series

Y

5

 Environmental Specifications

• When using any of the PS-A’s optional devices, be sure to check that device’s
specifications for any special conditions or cautions that may apply to its use.

• Be aware that not only does the Hard Disk have a fixed lifetime, but that accidents
can always occur. Therefore, be sure to back up your Hard Disk’s data regularly, or
prepare another Hard Disk unit that can be used for backup.

• The Hard Disk lifetime given here may be reduced due to unforeseen environmental
factors, however, generally speaking, the disk should last for 20,000 hours (of
operation) or approximately 5 years, whichever comes first, at an operating
temperature of 20

°C and 333 hours of operation per month. (HDD access frequency

of 20% or less)

• Using the Hard Disk in an environment that is excessively hot and/or humid will
shorten the disk’s usage lifetime. A wet bulb temperature of 29

°C or less is

recommended. This is equivalent to the following data.

• In order to extend the lifetime of the ha rd disk, Pro-face reco mme nds you set the
Windows® XP (classic) [Control panel]-[Power Options]-

[Power Options Properties]-

[Power Schemes]-

[Turn off hard disks] selection to turn the hard disk off when the unit

is not being operated. A setting of 5 minutes is recomm ended.

DIP Switches

1. Changing Settings

To set the DIP switches which are on the PS-A’ s circuit board, remove the PS-A’s Fan Unit or
Memory Slot Cover.

• Use a screwdriver to loosen or tighten the screws. Be sure not to tighten screws too
tightly, since it may damage the unit.

• Be careful when removing o r insert in g any screws t hat t hey d o not f al l insi de the PS-A.

(1) Turn OFF the power switch of the PS-A and remove the power cable. Place the PS-A on a

flat, level surface facing the display face downwards.

PS-3650A Series PS-3651A Series

Physical

Surrounding Air
Temperature

0 to

50 °C

: without HDD

5 to

50 °C

: with HDD

0 to

50 °C

: without HDD

5 to

45 °C

: with HDD

Stor ag e Temperature - 20 to +60°C
Ambient Humidity

10 to 90% RH (Not condensing, wet bulb temperature: 39°C or less.
with HDD: 29°C or less.)

Stor ag e Hu m id i ty

10 to 90% RH (Not condensing, wet bulb temperature:39°C or less.)
Dust 0.1mg/m3 and below (Non-conducti ve le vel s)
Pollution Degree For use in Pollution Degree 2 environment

Temperature at 35°C at 40°C

Humidity no higher than 64% RH no higher than 44% RH