Digital Device LD – 700T User Manual

Appendix 6. User Manual

User Manual

TFT LCD Monitor

LD – 700T

DIGITAL DEVICE

FCC Compliance Statement

This equipment has been tested and found to comply with the limits for a Class B
digital device, pursuant to Part 15 of FCC Rules. These limits are designed to provide
reasonable protection against harmful interference in a residential installation. This
equipment generates, uses, and can radiate radio frequency energy and, if not installed
and used in accordance with the instructions, may cause harmful interference to radio
communications.

However, there is no guarantee that interference will not occur in a particular
installation. If this equipment dose cause harmful interference to radio or television
reception, which can be determined by turning the equipment off and on, the user is
encouraged to try to correct the interference by one or more of the following measures:

- Reorient or relocate the receiving antenna.

- Increase the separation between the equipment and receiver.

- Connect the equipment into an outlet on a circuit different from that to which the

receiver is connected.

- Consult the dealer or an experienced radio /television technician for help.

Warning : You are cautioned that any changes or modifications to the equipment

not expressly approved by the party responsible for compliance could void your
authority to operate such equipment.

— NOTE: This unit was tested with shielded interface cables for the connection to the
host PC. The shielded interface cable must be used with the unit to insure compliance

DOC CLASS B NOTICE

This digital apparatus does not exceed Class limits for radio noise emission for a
digital apparatus as set out in the Radio Interference Regulations of the Canadian
Department of Communications.

MAIN FEATURES

Thank you for purchasing our high resolution TFT LCD monitor.
We recommend that you thoroughly read through this user's guide before using the product.
It is also recommended to safely store the guide in times of immediate need in the course of usin g the

product.

FRONT OF MONITOR

Uesd in turning on/off the screen.
The power

light shows regular and safe mode

functions with colors.

FUNCTIONS

Although regular monitors for PCs use CDT as a medium for display, the TFT LCD
Monitor is a Flat Panel Display based on digital technology, and was originally used only
for laptops PCs. Now it is used for desktops and laptops alike, opening a world of
conveniences and quality to those ardent PC users.

The following functions are provided in our products.

1. Convenient and easy to handle Control Button.

2. From PC function .

3. A slim and space reducing monitor

4. Monitor transferable for wall hanging.

5. Industrial robot and VESA install able.

6. Liberal angle control.(+30℃ ~ - 5℃)

7. Low energy consumption

8. Scarcely influences surrounding objects, with no harmful electronic waves, noise,
heat or magnetic activities.

Ventilator(Caution!)
Do not block the ventilator
Hole for wall hanging
Detachable Base

Detachable for other equipments

(VESA ARM) and wall hanging use.

Connector to External Functions
Connects sign

als with external

equipments and PCs.