Digital China Networks WL8200 I3 Users manual
802.11AC Wireless Access Point
Installation Manual
Manual Version: v1.0
802.11AC Wireless Access Point
Installation Manual Content
Content
Chapter 1Device Introduction ............................................. 1-1
Chapter 2Preparation for Installation ................................. 2-1
2.1 Installation Precautions ................................................................. 2-1
2.2 Installation Environment Requirement s ....................................... 2-2
2.3 Equipment Accessories ................................................................. 2-2
2.4 Installation Tools ............................................................................. 2-2
Chapter 3AP Installation ...................................................... 3-1
3.1 Installation Process ........................................................................ 3-1
3.2 Checking before Installation .......................................................... 3-2
3.3 Ensure the Installation Position .................................................... 3-2
3.4 Install WL8200 Series ..................................................................... 3-2
3.4.1 Wall Hanging Installation ..................................................................... 3-2
3.4.2 T-keel Installation .................................................................................. 3-3
3.5 Connect AP Power .......................................................................... 3-5
3.5.1 Checking before Power ........................................................................ 3-5
3.5.2 PoE Power ............................................................................................. 3-5
3.5.3 Local Power ........................................................................................... 3-6
3.5.4 Checking after Power ........................................................................... 3-6
3.6 Connect AP to Internet ................................................................... 3-7
1
802.11AC Wireless Access Point
Installation Manual Chapter 1 Device Introduction
Chapter 1 Device Introduction
WL8200 Series Wireless AP ( Access Point) is the new 1000Mb wireless AP device
based on 802.11n and 802.11AC standard with high performance from DigitalChina
Networks Limited (DCN). 802.11AC Wireless Access Point can work in the band of
2.4GHz and 5GHz. It can provide higher bandwidth and cover wider range. The uplink of
this AP adopts the 1000Mb Ethernet port which supports PoE power. It expands the
bandwidth. This series AP includes two products: WL8200-I2 is the 2X2 AP, WL8200-I3 is
the 3X3 AP.
Fig 1-1 WL8200 Series
The basic configuration of WL8200 Series indoor AP is as below:
Product Model
WL8200-I2 • IEEE802.11a/b/g/n/ac
Applicable Protocols
• Double Radiofrequency
Table 1-1 basic configuration
Antenna
and Features
Built-in antenna:
•2.4G gain 4.5dBi
•5G gain 5dBi
1-1
Maximum Power
Consumption
Default: ≤12.92W
Using USB: ≤18W
802.11AC Wireless Access Point
Installation Manual Chapter 1 Device Introduction
WL8200-I3 • IEEE802.11a/b/g/n/ac
• Double Radiofrequency
Built-in antenna:
•2.4G gain 4.5dBi
•5G gain 4.5dBi
The shape size and weight of WL8200 series indoor AP is as below:
Table 1-2 the shape size and weight
Product Model
WL8200
series（W
×D×
H） 183 x 150 x 42 mm 0.5kg
Shape Size Weight
Default: ≤12.92W
Using USB: ≤20W
1-2
802.11AC Wireless Access Point
Installation Manual Chapter 2 Preparation for Installation
Chapter 2 Preparation for Installation
2.1 Installation Precautions
Only allow the professionals installing and disassembling the device and its annex.
Before the installation and configuration, please read the related security introduction
carefully.
z Adopt the appropriate security measures to avoid the personal injury and
equipment damage.
z Please put the device on the dry and flat place and ensure the anti-skid
measures.
z Keep the device clean without dirt.
z Do not put the device on the wet place and avoid the device touching the liquid.
z Do not put the device and the installation tools in the walking area.
Any Changes or modifications not expressly approved by the party responsible for
compliance could void the user’s authority to operate the equipment.
This device complies with part 15 of the FCC Rules. Operation is subject to the
following two conditions: (1) This device may not cause harmful interference, and (2) this
device must accept any interference received, including interference that may cause
undesired operation.
FCC Radiation Exposure Statement:
This equipment complies with FCC radiation exposure limits set forth for an
uncontrolled environment. This equipment should be installed and operated with
minimum distance 20cm between the radiator& your body.
This transmitter must not be co-located or operating in conjunction with any other antenna or
transmitter
Note: This equipment has been tested and found to comply with the limites for a
Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to
provide reasonable protection against harmful interference in a residential installation.
This equipment generates uses and can radiate radio frequency energy and, if not
installed and used in accordance with the instructions, may cause harmful interferenceto
radio communications. However, there is no guarantee that interference will not occur in a
2-1
Loading...