Digital Alert Systems R194 User Manual

Instruction Manual

8 Channel Crawl System

Model R194

Lyndonville NY 14098-0535

800-821-6001

www.monroe-electronics.com

Monroe Electronics

100 Housel Ave

585-765-2254  fax [phone]

1340226

051809

Table of Contents

Warranty 1

Specifications 2

Front and Rear View 3

General Overview 4

Installation 5

Programming 5

Wiring Diagram 6

Warranty

Monroe Electronics, Inc. warrants to the owners, each instrument and sub-assembly
manufactured by them to be free from defects in material and workmanship for a period
of two years after shipment from factory. This warranty is applicable to the original
purchaser only.

Liability under this warranty is limited to service, adjustment or replacement of defective
parts (other than fuses and batteries) on any instrument or sub-assembly returned to the
factory for this purpose, transportation charges prepaid.

This warranty does not apply to instruments or sub-assemblies subjected to abuse,
abnormal operating conditions, or unauthorized repair or modification.

Since Monroe Electronics, Inc. has no control over conditions of use, no warranty is made,
or implied as to the suitability of our product for the customer's intended use.

THE WARRANTY SET FORTH IN THIS ARTICLE IS EXCLUSIVE AND IN LIEU OF ALL
OTHER WARRANTIES AND REPRESENTATIONS, EXPRESS, IMPLIED OR
STATUTORY INCLUDING, BUT NOT LIMITED TO THE IMPLIED WARRANTIES OF
MERCHANTABILITY AND FITNESS. Except for obligations expressly undertaken by
Monroe Electronics, in this warranty, Owner hereby waives and releases all rights, claims
and remedies with respect to any and all warranties, express, implied or statutory
(including without limitation, the implied warranties of merchantability and fitness), and
including but without being limited to any obligation of Monroe Electronics with respect to
incidental or consequential damages, or damages for loss of use. No agreement or
understanding varying or extending the warranty will be binding upon Monroe Electronics
unless in writing signed by a duly authorized representative of Monroe Electronics.

In the event of a breach of the foregoing warranty, the liability of Monroe Electronics shall
be limited to repairing or replacing the non-conforming goods and/or defective work, and in
accordance with the foregoing, Monroe Electronics shall not be liable for any other
damages, either direct or consequential.

Return Policy to Factory

Materials returned to Monroe Electronics must have a Return Material Authorization
number. To obtain a RMA number, contact our A/V Switching & Control Customer Service
at 585-765-2254 or fax [phone]. Customers have 30 days to determine that the
product ordered fills their need and performs as described in Monroe’s literature. Units
returned for approved repair or credit, must be in the original packaging including all parts
and paperwork plus be in very good physical condition. If not, the customer is billed the
cost to refurbish the unit and for missing accessories and merchandise. No products may
be returned for exchange or credit after 12 months of the shipment date. Monroe reserves
the right to repair or replace units under warranty.

1