Digital Alert Systems 629 User Manual

Model 629 Stereo A/V Distribution Amplifier

Installation

1. Connect your video and audio lines to be
distributed to the appropriate inputs.

2. Connect your video and audio outputs to
the appropriate loads.

3. Plug in the power supply to the jack marked
9 VAC.

4. Adjust the gain controls to supply the levels
desired for video and audio to your loads.

Operation

The 629 is an excellent quality amplifier for
video and audio signals. The levels are
adjustable from - 3 dBmV to + 3 dBmV of the
supplied inputs. The left and right audio are
independently adjusted.

Design and specifications are subject to change without notice

P/N (629/100) 050603

Specifications

Input

1 video, 1V p~p, 1 stereo audio, 50 KΩ 0 dB
Outputs

4 video, 1Vp~p @ 75Ω, 4 stereo audio @ 600
Ω

Video Outputs

- 3 dBmV to + 3 dBmV at 75Ω
Video Bandwidth

+0.5 dBmV 0 to 30 MHz, -3dB at 50 MHz
Audio Outputs

-3dBmV to +3dBmV, 600Ω, balanced
Audio S/N

Better than 70dBmV

Audio Bandwidth

20Hz to 20khz; +1dBmV
Audio Connections

Screw Terminals, detachable
Power Requirements

117VAC, 60Hz
Physical

2.00”H x 4.25”W x 6.50”D, 1lb.

WARRANTY

Monroe Electronics, Inc. warrants to the owners, each instrument and sub-assembly
manufactured by them to be free from defects in material and workmanship for a period
of one year after shipment from factory. This warranty is applicable to the original
purchaser only.

Liability under this warranty is limited to service, adjustment or replacement of defective
parts (other than fuses or batteries) on any instrument or sub-assembly returned to the
factory for this purpose, transportation charges prepaid.

This warranty does not apply to instruments or sub-assemblies subjected to abuse,
abnormal operating conditions, or unauthorized repair or modification.

Since Monroe Electronics, Inc. has no control over conditions of use, no warranty is
made, or implied as to the suitability of our product for the customer's intended use.

THE WARRANTY SET FORTH IN THIS ARTICLE IS EXCLUSIVE AND IN LIEU OF ALL
OTHER WARRANTIES AND REPRESENTATIONS, EXPRESS, IMPLIED OR
STATUTORY INCLUDING, BUT NOT LIMITED TO THE IMPLIED WARRANTIES OF
MERCHANTABILITY AND FITNESS. Except for obligations expressly undertaken by
Monroe Electronics, in this warranty, Owner hereby waives and releases all rights, claims
and remedies with respect to any and all warranties, express, implied or statutory
(including without limitation, the implied warranties of merchantability and fitness), and
including but without being limited to any obligation of Monroe Electronics with respect to
incidental or consequential damages, or damages for loss of use. No agreement or
understanding varying or extending the warranty will be binding upon Monroe Electronics
unless in writing signed by a duly authorized representative of Monroe Electronics.

In the event of a breach of the foregoing warranty, the liability of Monroe Electronics shall
be limited to repairing or replacing the non-conforming goods and/or defective work, and
in accordance with the foregoing, Monroe Electronics shall not be liable for any other
damages, either direct or consequential.

RETURN POLICY TO FACTORY:

Materials returned to Monroe must have a Return Material Authorization number. To
obtain a RMA number, contact our A/V Switching & Control Customer Service at 585­765-2254 or fax [phone]. Customers have 30 days to determine that the product
ordered fills their need and performs as described in Monroe’s literature. Units returned
for approved repair or credit, must be in the original packaging including all parts and
paperwork plus be in very good physical condition. If not, the customer is billed the
cost to refurbish the unit and for missing accessories and merchandise. No products
may be returned for exchange or credit after 12 months of the shipment date. Monroe
reserves the right to repair or replace units under warranty.