DIGISYNTHETIC PRO DS36 Instruction Manual
Instruction Manual
EDIT B
EDITA
PARAM/PUSH
PARAM/PUSH
DUAL DSP CONTROL DIGITAL AUDIO SYSTEM MODEL DS36
DIGISYNTHETIC PRO
ATTENTION!
All DIGISYNTHETIC PRO products are carefully packed and designed to protect the units from rough handling
before shipping out from the factory. Examine your good upon receiving, to ensure no damage during transportation.
Any damage claim should be inform & notify to relative dealer within 14 days of good received. The dealer
will not except failing of such. The consignee must make all shipping claims.
The DS36 fits into a standard 19" rack unit of space (1 3/4"). Allow at least an additional 4" depth for the
connectors on the back panel. Be sure that there is enough air space around the unit for cooling and ventilation.
DO NOT place the DS36 on high temperature devices like power amplifiers etc. to avoid overheating.
Using a main cable and a standard IEC receptacle makes the main connection of the DS36. It meets all of the
international safety certification requirements.
Please make sure that all units have a proper ground connection. For your own safety, do not remove the ground
connection within the unit or at the supply, or fail to make this connection at all.
This machine is only intended for qualified personnel to operate & install. Do not attempt to repair and service
yourself but referred to qualified technical service personnel. The user must have sufficient electrical contact
to earth. Electrostatic charges might affect the operation of the DS36.
NOTICE: Before switching voltage for local supply requirement, correct fuse type and rate must be installed.
When the power supply is 220V/240V, fuse is 125mA; and the power supply is 110V/120V, fuse is changed
to 315mA. The switch is preseted to 220V/240V in the factory.
CAUTION
THE POWER
SUPPLY CORD
SHOULD BE
DISCONNECTED
BEFORE
CHANGING
THE VOLTAGE
SELECTOR
DS36 DIGITAL AUDIO SYSTEM
Features:
MUSIC PROCESSING
10 kinds music pre modes, 8 kinds user adjustable modes
7
7
5 bands parametric equalizer(PEQ)
7
Dynamic compressor
7
Digital treble & bass control
7
Stereo digital key control
7
Subwoofer output
MICROPHONE PROCESSING
3 microphone input and volume control independently
7
7
3 bands parametric equalizer(PEQ)
7
Noise gate
7
6 kinds harmonic modes:3 Parts Harmony, Melody, Relative, Vocoder, Male lead, Female lead
7
7 kinds effect modes: Hall, Room, Plate, Stereo, Mono, Stereo Echo&Rev, Mono Echo&Rev
GENERAL PROCESSING
7
3 DSP processing with high integration and high dependently.
7
Remoter control
7
Parameter can be memorized
7
MIDI IN control
7
S XLR remote control
Function Keys
A. MASTER
B. PEQ
:
C. BYPASS
D. PROGRAM
RESET
Adjust microphone and music volume and effect parameters
:
Adjust microphone and volume parameters PEQ
:
Music bypass
:
Microphone and music program setup
:
Microphone and music's parameters restoration
E. COMPRESSOR
LOCK
:
Lock the part parameters of microphone and music
EDITA
PARAM/PUSH
:
Adjust microphone noise gate and music compressor
EDITB
PARAM/PUSH
F. STORE
MIDI
:
Save music parameter EQ user-defined mode
:
MIDI input equipment control
Loading...