Copyright 2018 by Digisol Systems Ltd. All rights reserved.
Company has an ongoing policy of upgrading its products and it may be possible that
information in this document is not up-to-date.
Please check with your local distributors for latest information.
No part of this document can be copied or reproduced in any form without written
consent from the company.
Trademark
DIGISOLTMis a trademark of Digisol Systems Ltd. All other trademarks
are the property of the respective manufacturers.
Page 3
3
Package Contents
1 No. NVR (8-channel)
Power adapter
Quick Installation Guide
1 USB Mouse
Installation Guide CD
Tools package (Screws)
Provides H.264 high efficiency video Compression.
Supports 8 CH.
Supports Recording / Playback.
Supports up to 4TB HDD.
Supports two USB 2.0 ports for USB mouse.
Provides HDMI/VGA Output.
1 x RJ45 Ethernet LAN.
Supports 2 SATA Slot.
The following items should be present in your package:
Make sure that the package contains above items. If any of the listed items is
damaged or missing, please contact your retailer immediately.
Product Overview
Thank you for purchasing DIGISOL Network Video Recorder!
This QIG is a reference guide for the installation and operation of your NVR.
Before installation and operation please read the safeguards and warnings mentioned
in the sections below carefully.
Product Features
Page 4
4
System Requirements
Windows XP, Vista or Win 7 operating system (both 32 or 64 bits version)
4GB of system memory
2GB of Display card memory
100GB of available hard disk space on system drive
At least one SATA Hard Disk for recording the video
Do not place heavy objects on the NVR.
Do not let any solid or liquid fall into or infiltrate the NVR.
Please brush the printed circuit boards, connectors, fans, machine box
Do not disassemble or repair the NVR yourself.
Do not replace the components yourself.
Please place and use the NVR between 0ºC and 40ºC. Avoid direct sunlight &
Do not install the NVR in damp environment.
Do not use the NVR in smoky or dusty environment.
Avoid collision or strong fall.
Please ensure the NVR level installation in a stable workplace.
Please install in ventilated place. Keep the vent clean.
Use within the rating input and output scope.
The following system requirements are recommended:
Important Safety Information and Warnings
and so on regularly. Before the dust cleaning please switch off the power
supply and unplug it.
Environment
keep the NVR away from heat source.
Accessories
Be sure to use accessories recommended by the manufacturer. Before installation,
open the accessory kit and check if all the components are included. If any
components are missing, contact your vendor ASAP.
Page 5
5
Hardware Installation
Inspect the NVR Packaging and Check Contents
Upon receiving your NVR, please check for any visible damage to the external
packaging. If the external packaging is damaged, please document the damage and
report to the shipping agent. The protective materials used in packaging of the
NVR can protect against most accidental damage during shipping and should be
saved. Immediately after opening the box, please check the items included in the
accessory kit against the packing list. Finally, remove the NVR from the
packaging materials.
HDD Installation
The NVR contain two SATA HDD. If installing or upgrading, please use a
HDD of 7200rpm or higher which is specially designed for NVR/ DVR applications.
Please follow the instructions mentioned below to install/upgrade the HDD.
NOTE: The below shown product images are for illustration purpose only.
Actual product may vary.
Page 6
6
Page 7
7
Rear Panel
Power on NVR
After installing the hard drive, connect HDMI/ VGA cable and mouse on the NVR &
Power ON the NVR. Enter the system and intelligent deployment will run
automatically like below:
Page 8
8
Once the intelligent deployment step is completed, it will prompt a start wizard as
shown below:
Page 9
9
Live View Interface Menu
The following are the description of icons displayed on Live View of NVR.
Click this icon to enter the Main Menu.
Indicates that NVR interface is unlocked.
Indicates Alarm Status.
Display Network Status & IP Address.
Fast Multi-Channel Playback.
To switch the display channel.
Display Cloud Service QR Code.
Hide/ display the bottom bar on top.
Page 10
10
If you left click on video channel, it will display a mini menu of channel.
Digital Zoom
Video Parameters
Turn ON/ Off Manual Record
Playback the respective Channel
Channel Information
Microphone icon for supported IP camera.
Page 11
11
Playback
You can view the recordings by clicking Search option based on Time/ Date
as shown below:
Page 12
12
Mobile App Viewing
1. Installation of Mobile App
“Realview Pro” is available to download for Android & Apple iOS.
You can scan the App QR Code displayed under “Cloud Service Menu” or Click
Iicon on the bottom tool bar of NVR display interface. “QR Code Reader” is
required to scan the App code.
You will see the following icon on your phone when the installation is completed.
App Download QR CodeRealView Pro
(You can scan it directly)
Page 13
13
2. App Interface
Open the App, it will display the following screen as shown in Fig1. Click on Add
Device & scan the NVR QR Code as displayed on NVR Video display under Cloud
Service option.
Fig1Fig2
Page 14
14
Once it detects device, it will display message as “Success”, as per screen Fig3.
Fig3Fig4
You can view the live Video as displayed in screen Fig4 shown above.
You can also auto search the IP camera under LAN tab as shown in Fig5 below:
Fig5
Page 15
15
You can playback the recordings of NVR using the app as shown below:-
Fig6
This product comes with Two Years warranty. For further details about warranty policy and Product
Registration, please visit support section of www.digisol.com