DIGISOL DG-WA1000N Quick Install Guide

DG-WA1000N

150N Wireless LAN Access Point

Quick Installation Guide

V1.0

2010-07-19

DIGISOL DG-WA1000N Wireless LAN Access Point Quick Installation Guide

FCC warning:

This equipment has been tested and found to comply with the limits for a class B digital device,
pursuant to Part 15 of the FCC Rules. These limitations are designed to provide reasonable
protection against harmful interference in a residential installation. This equipment generates, uses
and can radiate radio frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications. However, there is no
guarantee that interference will not occur in a particular installation. If this equipment does cause
harmful interference to radio or television reception, which can be determined by turning the
equipment off and on, the user is encouraged to try to correct the interference by one or more of
the following measures:

• Reorient or relocate the receiving antenna.

• Increase the separation between the equipment and receiver.

• Connect the equipment into a different outlet from that to which the receiver is connected.

• Consult your local distributors or an experienced radio/TV technician for help.

• Shielded interface cables must be used in order to comply with emission limits
Changes or modifications to the equipment, which are not approved by the party responsible for
compliance could affect the user's authority to operate the equipment.

Copyright © 2010. All rights reserved.
Company has an on-going policy of upgrading its products and it may be possible th at information
in this document is not up-to-date.
Please check with your local distributors for the latest information.
No part of this document can be copied or reproduced in any form without written consent from
the company.

Trademarks:

TM

DIGISOL
property of the respective manufacturers.

is a trademark of Smartlink Network Systems Ltd. All other trademarks are the

2

DIGISOL DG-WA1000N Wireless LAN Access Point Quick Installation Guide

1. Package Contents

The following items should be present in your package:

 DG-WA1000N Wireless Access Point

 3dBi dipole antenna

 AC power adapter

 Rubber feet (4 Nos.)

 Quick Installation Guide

 Installation software CD (includes User Manual & Utility)

 DIGILINK patch cord (1 No.)

Make sure that the package contains above items. If any of the listed items is damaged or
missing, please contact your retailer immediately.

2. Product Overview

Thank you for purchasing DG-WA1000N 150Mbps 802.11n Wireless Access Point!
DG-WA1000N enables communication between wireless and wired notebooks/desktop
computers in the network. It complies with IEEE 802.11n standard and is backward
compatible with IEEE 802.11b/g standard. The DG-WA1000N wireless Access Point can
provide wireless data transmission rate up to 150Mbps which enhances the sharing of files,
photo, audio, video and gaming experience over wireless network.

3. System Requirements

The following system requirements are recommended

 Notebook or desktop PC with network adapter (wired/WLAN)
 Windows 2000/XP/Vista/7 Operating System
 A web browser
 AC power socket (100 – 240V, 50/60Hz)

3

DIGISOL DG-WA1000N Wireless LAN Access Point Quick Installation Guide

4. Access Point Installation

Step 1: Insert the Setup CD into your CD-ROM drive of notebook/desktop computer.

Step 2: Explore the CD and execute the “EZWizard.exe” file.

4