How it Works
Digisol
Loading...
DG-SC3600W
User Manual
31 pgs1.67 Mb0
User Manual
25 pgs696.24 Kb0

Digisol DG-SC3600W User Manual

Download
Page 1
Megapixel Wireless IP camera with
Night Mode & Audio Support
V1.2
2018-06-21
As our products undergo continuous development the specifications are subject to change without prior notice
________________________________________________________________________________________________
Page 2
2
COPYRIGHT
Copyright 2018 by Digisol Systems Ltd. All rights reserved. Company has an ongoing policy of upgrading its products and it may be possible that information in this document is not up-to-date.
Please check with your local distributors for latest information. No part of this document can be copied or reproduced in any form without written consent from the company.
Trademark
DIGISOLTMis a trademark of Digisol Systems Ltd. All other trademarks are the property of the respective manufacturers.
Page 3
3
INDEX
1 Product Information................................................................................................................4
1-1 Introduction & Safety Information..........................................................................................4
1-2 Safety Information...................................................................................................................5
1-3Minimum Requirements...........................................................................................................5
1-4 Package Contents.....................................................................................................................5
1-5 Camera Hardware Overview....................................................................................................6
1-6 Camera Setup...........................................................................................................................6
2 Camera Configuration using Yoosee app...................................................................................7
3 Advanced Camera configuration using Yoosee app.................................................................12
3-a) Date & Time........................................................................................................................12
3-b) Picture & Sound..................................................................................................................13
3-c) Network Settings.................................................................................................................14
3-d) Alarm Settings.....................................................................................................................14
3-e) Recording Settings................................................................................................................17
3-f) Add Sensor.......……................................................................................................................17
3-g) Firmware Update.....................................................................................................................18
3-1) Other Menu........................................................................................................................18
3-2) More Menu........................................................................................................................21
3-2-a) Account............................................................................................................................21
3-2-b) Settings.............................................................................................................................22
3-2-c) Help & Feedback................................................................................................................21
3-2-d) About.................................................................................................................................23
3-2-e) Log Out.................................................................................................................………....27
4Appendix...............................................................................................................................28
4-1 Specification......................................................................................................................28
4-2 Troubleshooting................................................................................................................29
4-3 Glossary.............................................................................................................................30
Page 4
4
1. Product Introduction
1-1 Introduction and safety information
Thank you for purchasing DIGISOL IP cameras!!
DG-SC3600W is a 1Megapixel Wireless IP camera with IR LED and IR-cut Filter. This camera offers the latest compression technology with a CMOS sensor & a real time image processing hardware. With its high performance H.264 compression, users can stream high quality video at low bandwidth and storage capacity requirements.
It has IR Array for visibility under no light condition. The IR cut filter offers a true image quality during day/night Operations.
The Modular Design and aesthetic looks of the camera helps to be recessed easily into suspended ceilings or wall mounted with no need for an additional mounting brackets.
The wireless (802.11n) feature of this IP camera makes it versatile for installations.
Other features of this Wireless IP Camera include:
Supports 1/4” CMOS Sensor
Support 1MP resolution
Support H.264 compression
Supports 3.6mm Fixed Lens
4PCS IR Array, up to 10m IR distance
IR-CUT filter for true day/ night functionality
Micro SD slot for local storage
Yoosee App for Apple iOS & Android Phones/ Tabs
Page 5
5
1-2 Safety Information
In order to keep the safety of users and your properties, please follow the safety instructions
as mentioned below. The warranty will become void if you disobey these safety instructions.
This Network IP Camera is sophisticated electronic device; DO NOT drop it from a height.
DO NOT place this IP Camera at hot / humid places, and avoid direct sunlight.
Accessories of this IP Camera like power supply are dangerous to small children. KEEP THIS IP
CAMERA OUT OF REACH OF CHILDREN.
If you want to use this IP Camera at any place that may be spilled by water or dirt, a secure and
water-proof camera housing is required.
DO NOT pull any cord that is connected to this IP Camera by force.
The IP Camera will get heated up when used for a long time. (This is normal and is not a
malfunction). DO NOT put this IP camera on paper, cloth, or other flammable materials.
If the IP Camera falls into water when powered, DO NOT attempt to retrieve it back yourself!
Find a qualified electrical technician for help.
1-3 Minimum Requirements
Stable Wi-Fi connectivity.
Smartphone/ Tablet running the Yoosee Utility should be connected to internet to view the IP
camera in app.
Smartphone/ Tablet should be connected to desired Wi-Fi network before configuring the IP
camera using Yoosee utility.
Micro SD card for local storage.
1-4 Package Contents
Before you start using this IP camera, please check if there’s anything missing in the package, and contact your dealer of purchase to claim for missing items:
Megapixel Wireless IP Camera (1 No.)
Installation Guide CD (includes User Manual, QIG, Yoosee app)
Tools Package (Includes 2 screws, 2 nylon anchors along with mounting bracket)
Power Adapter (5V, 2A)
Quick Installation Guide
Page 6
6
1-5 Camera Hardware Overview
A) Front View B) Rear View
* On DG-SC3600W, reset hole is located on the bottom side of IP camera.
1-6 Camera Setup
Antenna
Camera Lens
MIC
4PCS IR Array
Power connector LAN
Micro SD Slot
Over the WAN
HOME
Page 7
7
2 Camera Configuration using Yoosee App
Please follow the instructions mentioned below to setup your new IP camera using the Yoosee app
Download Yoosee app on your smartphone or tablet using the below QR code available on bottom side of an IP camera.
Yoosee App
Once the Yoosee app is installed, simply tap on the icon to launch the app.
The following screen will be displayed. You need to register using Email ID to use this app.
Page 8
8
Once the Email ID is registered, login to the app with same credentials.
After login, it will display the app interface as shown above. Now turn ON the camera.Once the
camera boot up, it prompt’s a voice message to “connect the camera AP network”.
Go to Wireless Settings on your Mobile phone.
Page 9
9
It will display Camera AP SSID as “GW_AP_12132599” in available Wi-Fi network list as shown below:-
Click on it to connect AP network. By default its an open network & will assign IP address in
10.X.X.X range.
Then go to Yoosee app & refresh the device list in app. It will display camera entry as shown below:-
Page 10
10
Once you click on it, will prompt to select the desired Wi-Fi network along with password from the list as shown below:-
Select the desired Wi-Fi network & feed in password detail. Then click Next.
It will prompt a message to connect your mobile phone to same Wi-Fi network.
Click on “I get it” to proceed further.
Page 11
11
Connect your phone to same Wi-Fi network & then go to Yoosee app to proceed further.
It will display ‘Add Device’ page as shown above.
Once the connection is established, it will prompt the voice message as Device is Online & you can see the below screen in Yoosee app.
Select any name & click on Confirm.
Once the camera is added, click on it to display the IP camera video.
Page 12
12
You can see the following icons as highlighted above below the IP camera live view.
Also, you can change the video resolution to HD (High definition)/ SD (Standard Definition)/ LD (Low Definition) as highlighted on L.H.S of above image.
Page 13
13
3 Advanced Camera configuration using Yoosee app
You can click on settings icon as highlighted below to configure the advanced settings in Yoosee app.
3-a) Date & time
You can set the Date & Time on IP camera using this option in app.
Page 14
14
You can view the IP camera version by clicking on ‘Device Info’ button.
3-b) Picture & Sound Setting
You can view the Picture & Sound setting of IP camera view under this tab.
Page 15
15
3-c) Network Settings
You can view the network settings under this tab.
3-d) Alarm Settings
Under this tab, you can enable Motions Detection & set the Alarm Message, Buzzer for event triggered by Motion Detection.
Page 16
16
Once you set the Alarm & Alarm Recording settings, click on defense icon as highlighted below under the Main Window of Yoosee app.
IP camera will beep once you click this icon & lock the settings.
Page 17
17
If you have set “Receive Alarm” for Motion Detection, it will display the alarm buzzer as shown below on your smartphone whenever motion is triggered by an IP camera.
Clicking the highlighted icon will direct you to IP camera live view.
If you click icon, it will disable the alarm push message for your smartphone.
Page 18
18
3-e) Recording Settings
You can set the Recording Mode under this tab ( i.e Manual/ Schedule/ Alarm-based Recording).
The Micro SD card will be listed here. You can view the Used/ Available capacity of SD card under this tab. Also, you can format the SD card under this option.
NOTE: If there is no Micro SD card inserted, it will not allow you to set the Recording settings in Yoosee app.
3-f) Add Sensor
This feature is currently not supported.
Page 19
19
3-g) Firmware Update
Under this tab, you can view if there is any update for an IP camera.
3-1) Other Menu
In the Main interface of Yoosee app, there are other icons available which are described as below:-
You can click the highlighted icon to edit the camera ID or delete the device.
Page 20
20
You can scan the QR code of device by clicking this icon in Yoosee app.
You can view the recordings under the highlighted icon:
If you have configured Alarm Recording, it will show the messages under this tab.
Page 21
21
The captured snapshots can be viewed under this tab.
Page 22
22
3-2) More Menu
Under My tab, following options are displayed:
3-2-a) Account
You can bind/ unbind the configured Email/ Phone Account & set the login password under this tab.
Page 23
23
3-2-b) General Settings
You can set the Alarm ring/ Alarm Vibrate for Motion Detection & also can configure Notification
bar icon, automatically start option under this tab.
3-2-c) Help & Feedback:
You can check the Help Section under this tab.
Page 24
24
3-2-d) About
You can check the app details & new function description under this tab.
Latest version of Yoosee app adopts sharing algorithm to secure camera. The admin can use the QR code to share the device & only shared users can access your camera. The app will automatically create a guest password which only has permission to view video.
Page 25
25
After adding the camera to your smartphone, it will appear in your app device list.
You will find a sharing button float on device entry as highlighted below:
To share the camera with other people, click the sharing button.
It will go to "Sharing management", where it offers sharing information and QR code to
allow other users to add it by scanning this QR code.
Page 26
26
You can share this link to Other users to add the camera via shared QR code/ link information as shown above.
Once the user click on received link it will display the below screen if Yoosee application is not installed on user mobile phone & prompt to download the app.
If user already have Yoosee app installed on his mobile phone, it will display the following screen once cliked on shared link.
Page 27
27
Click on ‘Go to Connect’ to add the shared device.
Then click ‘ I get it’ to display the camera under Device list as shown below:
NOTE: Only admin account can modify/ edit the IP camera settings & playback the recordings via Yoosee app. Shared account can only view the IP camera video.
Admin account can view the connected shared user detail under Sharing Management Option as shown below:
Admin Account can share the link or delete the shared access under this tab.
Page 28
28
Accessing the camera's settings, you will find a new option "Unbind devices", don't unbind the device, unless you want to delete the camera from your account.
Your camera will bind with your account, only this account can set the camera. This means if your camera is stolen by someone else, they are not able to use/ edit any settings on it.
3-2-e) Log Out:
Log out Yoosee application.
Page 29
29
4 Appendix
4-1 Specification
Type
DG-SC3600W
Sensor
¼” CMOS Sensor
Lens
3.6mm, Fixed Lens
Min Illumination
0.3Lux
IR Array
4PCS
IR distance
Up to 10m
IR-Cut Filter
Yes
Video Compression
H.264
Max Resolution
1280 X 720 (1MP)
Audio Support
Yes; Built-in Mic/ Speaker
Protocol
TCP/ IP, UDP, SMTP, DHCP, UPnP
Wireless LAN
802.11b/g/n
Local Storage
Micro SD slot (Up to 128GB)
Event Management
Events triggered by Motion Detection, Record Video/ Images to
Micro SD via Yoosee utility
Operating Temperature
0degC~+50degC
Operating Humidity
20%~80%, Non-Condensing
Power Rating
5V, 2A
Casing
Plastic
Page 30
30
4-2 Troubleshooting
Please don’t panic when you found this IP camera is not working properly. Before you send this IP camera back to us, you can do some simple checks to save your time:
Problem description
Possible solution(s)
Cannot access the IP camera
Please make sure the IP camera is correctly
powered. (‘Power’ LED should be on).
Please confirm the Mobile phone/ Tablet is
connected to internet & internet connectivity should be stable to view the IP camera.
Please make sure the Wi-Fi details entered
in app are proper.
In case, the IP camera is not accessible,
reset it to factory default value by pressing 'reset' button on the IP camera.
If you're trying to connect to the IP camera
from Internet, please make sure the port that IP camera uses is not blocked by firewall or other software / hardware.
Contact DIGISOL helpdesk, if above
solutions do not work.
Image refreshes very slowly
Try a lower resolution.
If you're connecting this camera from
Internet, it could be caused by a slow Internet connection, and it's not a problem caused by camera. However, when the network connection is slow, you should use lower frame rate / resolution.
Contact DIGISOL helpdesk, if above
solutions do not work.
Page 31
31
4-3 Glossary
H.264: H.264 is the latest compression technology that significantly reduces the file size of high-quality video images. Offers higher video resolution than Motion JPEG or MPEG-4 at the same bit rate and bandwidth, or the same quality video at a lower bit rate.
TCP / IP (Transmission Control Protocol/ Internet Protocol): TCP is used along with the Internet Protocol (IP) to transmit data as packets between computers over the network. TCP is a connection-oriented protocol, which means that a connection is established between the two end-points and is maintained until the data has been successfully exchanged between the communicating applications.
SMTP (Simple Mail Transfer Protocol): SMTP is used for sending and receiving e-mail. SMTP authentication is an extension of SMTP, whereby the client is required to log into the mail server before or during the sending of email. It can be used to allow legitimate users to send email while denying the service to unauthorized users, such as spammers.
UPnP (Universal Plug & Play): A set of computer network protocols that allow the automatic peer-to-peer detection of devices on the network. Allows the discovery of UPnP- enabled devices in a network environment.
CMOS Sensor (Complimentary metal-oxide semiconductor): Is an image sensor available in many IP network cameras with less circuitry hence consumes less power, produces higher frame rate & is less costly as compared to CCD sensors.
Day/Night function: This IP camera has IR LED for better visibility under no light environment. If the environment light is not sufficient enough to view the camera then the IR LED’s are triggered automatically for better visibility.
This product comes with Two Years warranty. For further details about warranty policy and Product Registration, please visit support section of www.digisol.com
Loading...
Buy Points How it Works FAQ Contact Us Questions and Suggestions Privacy Policy Cookie Policy Terms of Use