Digisol DG-IS4512HP, DG-IS4514HP, DG-IS4508HP User Manual
DG-IS4508HP/IS4512HP/IS4514HP
Industrial Ethernet POE L2 SWITCHES
User Manual
V2.0
2018-10-16
As our products undergo continuous development the specifications are subject to change without prior notice
DG-IS4508HP/IS4512HP/IS4514HP Hardware Installation Guide
2
COPYRIGHT
Copyright 2018 by Digisol Systems Ltd. All rights reserved.
Company has an ongoing policy of upgrading its products and it may be possible that
information in this document is not up-to-date.
Please check with your local distributors for latest information. No part of this document
can be copied or reproduced in any form without written consent from the company.
Trademark
DIGISOL
TM
is a trademark of Digisol Systems Ltd. All other trademarks are the property
of the respective manufacturers.
DG-IS4508HP/IS4512HP/IS4514HP Hardware Installation Guide
3
Table of Contents
Chapter 1 Information of Managed Switch ........................................................................................................................... 4
1.1 Overview ............................................................................................................................................................... 4
1.2 POE Switch System Properties Parameters ......................................................................................................... 5
Chapter 2 Preparing for installation ...................................................................................................................................... 7
Chapter 3 Installing switch .................................................................................................................................................... 8
3.1 Installation tools and devices .............................................................................................................................. 10
3.2 Switch Case Installation ...................................................................................................................................... 10
3.2.1 Install on the desk ................................................................................................................................... 10
3.2.2 DIN-Rail Mounting ................................................................................................................................... 10
3.2.3 Wall Mounting .......................................................................................................................................... 11
3.3 Ethernet Interface (RJ45 Ethernet) ...................................................................................................................... 12
3.4 Ethernet Interface (Fiber, SFP) ............................................................................................................................ 12
3.5 Connecting Power Terminal Block ....................................................................................................................... 13
3.6 Alarm Relay and Ground ..................................................................................................................................... 13
3.7 Console Connection ............................................................................................................................................ 14
3.8 Connect & Login to Managed Switch................................................................................................................... 16
3.9 CLI Initialization & Configuration (Optional) ......................................................................................................... 16
Chapter 4 Hardware Troubleshooting................................................................................................................................. 17
4.1 Trouble analyzing ................................................................................................................................................ 17
4.1.1 Power and cooling system breakdown .................................................................................................... 17
4.1.2 Ports, cables and connections breakdown .............................................................................................. 17
4.2 LED Status Indication ............................................................................................................................................. 18
DG-IS4508HP/IS4512HP/IS4514HP Hardware Installation Guide
4
Chapter 1 Information of Managed Switch
This section explains the parameters of POE managed switch.
1.1 Overview
These Managed Ethernet Switches are designed for supporting standard industrial
applications. Managed switches are easier to prioritize, partition, and organize user’s
network, providing a more reliable and better quality services.
1.2 Package Checklist
Please verify the box contains the following items:
Item
Quantity
Management Ethernet switch
1
Wall-mount plates
2
DIN-Rail CLIP
1
M3 Screws (for the wall mount plates & DIN CLIP)
4
DC power terminal block
1
SFP Ethernet port Dust cover
Same as SFP port number
Features of standard ports:
Port name
Features
Gigabit Ethernet
interfaces with PoE
PoE:
IEEE 802.3af,
Speed: 10/100/100M
auto-sense
, cable:
MDI/MDIX, UTP (RJ45) interface with LINK/ACT, PoE indicator.
SFP interfaces
Speed: 1000M
Console
interface
Speed: 115200bps, RJ45 interface
DG-IS4508HP/IS4512HP/IS4514HP Hardware Installation Guide
5
Components of Managed POE Switch front-panel:
NO.
Name Description
1
PWR
(P1,P2)
Power indicator lights
Switch on and indicator lights.
2
ALM
Alarm
Alarm Indication lights.
3
PoE
PoE Indicator of PoE
port.
Indicator lights when PoE linking is normal
1.3 POE Switch System Properties Parameters
Table of POE Switch property parameters:
DG-IS4508HP/IS4512HP/IS4514HP Hardware Installation Guide
6
Model
PoE Managed Series
Ethernet
Copper RJ45 Ports
10/100/1000 Mbps speed auto-negotiation MDI/MDIX Auto-crossover
SFP(pluggable Ports)
100/1000Base SFP slot
Fiberport connector
LC typically for fiber (depends on module)
Power
PoE Managed series
Power input
Redundant Input Terminals; Reverse power protection
Input voltage range
12-58 VDC (with POE: 46-58 VDC)
Maximum Power
consumption
Without PoE: 14 Watts With PoE: 265 Watts
Environmental and Compliance
Operating
temperature
-40 to +75°C (cold startup at -40°C)
Storage
-40 to +85°C
Humidity
5 to 95% RH (non-condensing)
Mechanical
PoE Managed series
Ingress protection
IP30
Dimension
(without DIN rail
clip)
154mm(H) x 128mm(D) x 77mm(W)
Weight 1410g
Installation optio
n
DIN-Rail mounting Wall mounting
Loading...