Digisol DG-GS4900SE Series, DG-GS4928FSE, DG-GS4928SE, DG-GS4952SE, DG-GS4928HPSE2 Installation Manual
...
DG-GS4900SE Series
Installation Manual
V1.0
20/11/2016
As our products undergo continuous development the specifications are subject to change
without prior notice
DG-GS4900SE Series Installation Guide
Content
1.1 OVERVIEW
........................................................................................................
1.2 INTRODUCTION TO PRODUCT.......................................................................... 4
1.2.1 Product Overview................................................................................................ 4
1.2.2 Features and Benefits........................................................................................ 5
1.3 PHYSICAL SPECIFICATIONS.............................................................................7
1.4 DESCRIPTION OF HARDWARE......................................................................... 9
1.4.1 Front Panel............................................................................................................ 9
1.4.2 Back Panel...........................................................................................................10
1.4.3 Status LEDs.........................................................................................................10
1.4.4 Interface Description of Front Panel............................................................ 11
2.1 INSTALLATION NOTICE.................................................................................. 13
4
2.1.1 Environmental Requirements........................................................................ 13
2.1.2 Installation Notice..............................................................................................17
2.1.3 Classs A Statement...........................................................................................17
2.1.4 Security Warnings............................................................................................. 17
2.2 INSTALLATION PREPARATION
2.2.1 Verify the Package Contents.......................................................................... 18
2.2.2 Required Tools and Utilities........................................................................... 18
2.3 INSTALLATION GUIDE
2.3.1 Installing Switch.................................................................................................19
2.3.2 Connecting Console......................................................................................... 20
2.3.3 SFP Transceiver Installation...........................................................................20
....................................................................................
.......................................................................
18
19
2
DG-GS4900SE Series Installation Guide
2.3.4 SFP+ extended module Installation............................................................. 21
2.3.5 Copper Cable/Fiber Cable Connection........................................................21
2.3.6 AC Power Supply Connection........................................................................22
3
DG-GS4900SE Series Installation Guide
Chapter 1 Introduction
1.1 Overview
Name
Type
Description
DG-GS4900SE
series
DG-GS4928SE
20 copper ports ＋ 4Combo ports ＋ 4
10Gb optical ports
DG-GS4952SE
48 ports 10/100/1000BaseT + 4 x
10GE(SFP+)
DG-GS4928HPSE2
20 copper ports(PoE) ＋4Combo ports
＋4 10Gb optical ports
DG-GS4952HPSE
48 ports 10/100/1000BaseT (PoE) + 4
x 10GE(SFP+)
DG-GS4928FSE
24 Port Switch 1000Mbps SFP 16 Giga
Combo
1.2 Introduction to Product
1.2.1 Product Overview
DG-GS4900SE series switches are Ethernet switches. DG-GS4900SE series
switches are intelligent network management switch used by the network environment
which needs the high performance, the bigger port density and the convenient installation.
DG-GS4900SE series switches include the types in the following:
DG-GS4900SE series switches include DG-GS4928SE/DG-GS4952SE and
DG-GS4928HPSE2/DG-GS4952HPSE switches. DG-GS4928HPSE2 supplies 24 ports
for exporting PoE power supply, and the max output power of each port is 30W.
DG-GS4952HPSE supplies 48 ports for exporting PoE power supply, and the max output
power can go up to 60W.
4
DG-GS4900SE Series Installation Guide
1.2.2 Features and Benefits
Various Interfaces
Support 10Gb Ethernet
Networking Protocols
ACL
QoS
DG-GS4928SE/DG-GS4928HPSE2 provides 20 fixed 1000Mb copper ports, 4
1000Mb COMBO ports (1000Mb fiber SFP ports/1000Mb copper ports) and4 10Gb optical
ports. DG-GS4952SE/DG-GS4952HPSE provides 48 fixed 1000Mb copper ports, 4 10Gb
optical ports.
10Gb Ethernet which adopts full-duplex technology instead of low-speed, half-duplex
CSMA/CD protocol, is a big leap in the evolution of Ethernet. 10Gb Ethernet can be
deployed in star or ring topologies. DG-GS4900SE series switches provide broad
bandwidth and powerful processing capacity. It is suitable for metropolitan networks and
wide area networks. Using DG-GS4900SE series switches, users can simplify network
structures and reduce cost of network construction.
DG-GS4900SE series switches support 802.1d/w/s, 802.1Q, 802.1p, 802.3ad, 802.3x,
GVRP, DHCP and SNTP etc. The switches also support the multicast protocols such as
IGMP, DVMRP and PIM. Moreover, DG-GS4900SE series switches support RIPv1/2,
OSPF, BGP and IPv6 protocols. All these protocols supported enable DG-GS4900SE
series switches to meet the requirements of complex network constructions.
DG-GS4900SE series switches support comprehensively ACL policies. The traffic
can be classified by source/destination IP addresses, source/destination MAC addresses,
IP protocols, TCP/UDP, IP precedence, time ranges and ToS. And various policies can be
conducted to forward the traffic. By implementing ACL policies, users can filter the virus
packets such as “Worm.Blaster”, “Worm.Sasser” and “Red Code” etc. DG-GS4900SE
series switch also support IEEE802.1x port based access authentication, which can be
deployed with RADIUS, to ensure the port level security and block illegal users.
DG-GS4900SE series switches fully support DiffServ Module. Users can specify a
5
DG-GS4900SE Series Installation Guide
3D-SMP Ready
Perfect Web Management.
Flexible Power Ensure System
Abundant Management Ability of Device
Abundant Mode Status
queue bandwidth on each port. WRR/SP/SWRR scheduling is also supported.
DG-GS4900SE series support the port trust. Users can configure trusted CoS, DSCP, IP
precedence and port priority. User can also modify packet’s DSCP and COS values. The
traffic can be classified by port, VLAN, DSCP, IP precedence and ACL table. User can also
modify packet’s DSCP and IP precedence values. Users can specify different bandwidths
for voice/data/video to customize different qualities of service.
DG-GS4900SE series are up to the mustard of Self-defending security region
management strategy. It is supported interaction with some security system such as
firewall,IDS,etc. It can defense the virus and aggress effectively from the extranet and
internet. Thus enhance the security and stability of the network-wide.
DG-GS4900SE series support SNMP,In-band and Out-of band Management,CLI
and WEB interface and RMON. It can mail the correlative sensitive information to the
administrator abide by SMTP protocol. DG-GS4900SE series support SSH protocol,
ensure the configuration management security of the switch.
DG-GS4900SE series support two AC power which have the backup function if one
of them is fault. The power is hot swappable that improves the expansibility and flexibility
of the power system.
DG-GS4900SE series have the network 1000Mb management port. It can upgrade
the device through the common business electrical port or the network management port.
It can also login the network management web page through the common business
electrical port or the network management port.
DG-GS4928SE has the MODE button. The MODE LED is on when the button is
pressed and the LED shows the vsf information. It will recover to be the default status after
pressing it again.
DG-GS4928HPSE2 has the MODE button. The MODE LED is on when the button is
6
DG-GS4900SE Series Installation Guide
1.3 Physical Specifications
Item
DG-GS4928SE
DG-GS4928HPSE2
Dimension(W * H *
D)（mm）
440×350×44
440×350×44
Weight
<6kg
<6kg
Fixed ports
20 100/1000Base-TX auto negotiation ethernet
ports
4 1000Mb Combo ports
4 10Gb optical ports
20 100/1000Base-TX auto negotiation ethernet
ports
4 1000Mb Combo ports
4 10Gb optical ports
Management ports
1 Console port, 1 network management port which supports 1000Mb rate
System power
DG-GS4900SE series support AC power input:
AC input:
The rating voltage range: 100V~240V AC; 50/60HZ
The max voltage range: 90V~264V AC; 47HZ～63HZ
Output power
supply of PoE
Do not support
Support
The max Power
Consumption
30W
440W
Fan
None
Support automatic timing
Operating
-5℃~50℃
-5℃~50℃
pressed and the LED shows the PoE power information. It will also on when pressing it
again and it shows the vsf information. It will recover to be the default status after pressing
it again.
The mode switching LED will recover to be the default status after 45s without
pressing.
7
Loading...