Digisol DG-GS4600SE2 Series, DG-GS4628HPSE2, DG-GS4628SE2, DG-GS4652SE2, DG-GS4628FSE2 Installation Manual
DG-GS4600SE2 Series
GIGA LAYER 3 SWITCHES
Installation Guide
V1.0
2018-01-30
As our products undergo continuous development the specifications are subject to change without prior notice
DG-GS4600SE2 Installation Guide
Content
Chapter 1 INTRODUCTION............................................................... 1-1
1.1 OVERVIEW
1.2 INTRODUCTION TO PRODUCT
1.2.1 Product Overview.............................................................................................1-1
1.2.2 Features and Benefits..................................................................................... 1-2
1.3 PHYSICAL SPECIFICATIONS
1.4 DESCRIPTION OF HARDWARE
1.4.1 Front Panel......................................................................................................... 1-5
1.4.2 Back Panel..........................................................................................................1-6
1.4.3 Status LEDs....................................................................................................... 1-6
1.4.4 Interface Description of Front Panel...........................................................1-7
.....................................................................................................
.......................................................................
.........................................................................
......................................................................
1-1
1-1
1-3
1-5
Chapter 2 HARDWARE INSTALLATION........................................ 2-1
2.1 INSTALLATION NOTICE
2.1.1 Environmental Requirements....................................................................... 2-1
2.1.2 Installation Notice............................................................................................ 2-4
2.1.3 Security Warnings............................................................................................ 2-4
.................................................................................
2-1
2.2 INSTALLATION PREPARATION
2.2.1 Verify the Package Contents.........................................................................2-5
2.2.2 Required Tools and Utilities.......................................................................... 2-5
2.3 INSTALLATION GUIDE
2.3.1 Installing Switch............................................................................................... 2-6
2.3.2 Connecting Console........................................................................................2-6
2.3.3 SFP Transceiver Installation......................................................................... 2-7
2.3.4 SFP+ extended module Installation............................................................ 2-8
2.3.5 Copper Cable/Fiber Cable Connection.......................................................2-8
2.3.6 AC Power Supply Connection...................................................................... 2-9
...................................................................................
......................................................................
2
2-5
2-6
DG-GS4600SE2 Installation Guide
Chapter 1 Introduction
1.1 Overview
Name
Type
Description
DG-GS4600SE2
Series
DG-GS4628HPSE2
20 copper ports＋ 4 Combo ports ＋ 4
10Gb optical ports
DG-GS4628SE2
24 copper ports＋4 10Gb optical ports
DG-GS4652SE2
48 copper ports＋4 10Gb optical ports
DG-GS4628FSE2
8 Combo ports ＋ 16 1Gb optical
ports+4 10Gb optical ports
1.2 Introduction to Product
1.2.1 Product Overview
DG-GS4600SE2 series of ethernet switches are that a series of three layer
line speed Ethernet switch products by self-development in DIGISOL ,intelligent
network management switch used by the network environment which needs the
high performance, the bigger port density and the convenient installation,
DG-GS4600SE2 series switches include the types in the following:
Table 1- 1 DG-GS4600SE2 series switches types
DG-GS4600SE2 series switches include DG-GS4628SE2 / DG-GS4628HPSE2 /
DG-GS4652SE2/ DG-GS4628FSE2. DG-GS4628HPSE2 supplies 370W POE power
supply,and the max output power of each port is 30W(12 ports per port support POE
maximum power 30W,24 ports simultaneously access single port average per port
support power of 15.4W).DG-GS4628HPSE2 supplies 20 copper ports+4 Combo
ports+4 10Gb optical ports. DG-GS4652SE2 supplies 48 copper ports+4 10Gb optical
ports, DG-GS4628SE2 supplies 24 copper ports ＋ 4 10Gb optical ports.
DG-GS4628FSE2 supplies 8 Combo ports+16 1Gb optical ports +4 10Gb optical ports
Chapter 1-1
DG-GS4600SE2 Installation Guide
1.2.2 Features and Benefits
Various Interfaces
Support 10Gb Ethernet
Networking Protocols
ACL
QoS
DG-GS4628HPSE2 provides 20 fixed 1000Mb copper ports, 4 1000Mb COMBO
ports (1000Mb fiber SFP ports/1000Mb copper ports) and 4 10Gb optical ports.
DG-GS4652SE2 provides 48 copper ports and 4 10Gb optical ports.DG-GS4652SE2
provides 48 copper ports ＋ 4 10Gb optical ports. DG-GS4628FSE2 supplies 8 Combo
ports+16 1Gb optical ports +4 10Gb optical ports
10Gb Ethernet which adopts full-duplex technology instead of low-speed,
half-duplex CSMA/CD protocol, is a big leap in the evolution of Ethernet. 10Gb Ethernet
can be deployed in star or ring topologies. DG-GS4600SE2 series switches provide
broad bandwidth and powerful processing capacity. It is suitable for metropolitan
networks and wide area networks. It can simplify network structures and reduce cost of
network construction.
DG-GS4600SE2series switches support 802.1d/w/s, 802.1Q, 02.1p, 802.3ad,
802.3x, GVRP, DHCP and SNTP etc. The switches also support the multicast pr
otocols such as IGMP, DVMRP and PIM. Moreover,DG-GS4600SE2series switche
s support RIPv1/2, OSPF, BGP and IPv6 protocols. All these protocols supported
enable DG-GS4600SE2 series switches to meet the requirements of complex ne
twork constructions.
DG-GS4600SE2 series switches support comprehensively ACL policies.The tr
affic can be classified by source/destination IP addresses, source/destination MAC
addresses, IP protocols, TCP/UDP, IP precedence, time ranges and ToS. And va
rious policies can be conducted to forward the traffic. By implementing ACL polici
es, users can filter the virus packets such as “Worm.Blaster”, “Worm.Sasser” and
“Red Code” etc. DG-GS4600SE2 series switch also support IEEE802.1x port ba
sed access authentication, which can be deployed with RADIUS, to ensure the p
ort level security and block illegal users.
DG-GS4600SE2 series switches fully support DiffServ Module. Each port provides
8 priority queues.Users can specify a queue bandwidth on each port. WRR/SP/SWRR
scheduling is also supported. DG-GS4600SE2 series support the port trust. Users can
configure trusted COS, DSCP, IP precedence and port priority. User can also modify
Chapter 1-2
DG-GS4600SE2 Installation Guide
Perfect Web Management.
Flexible Power Ensure System
Abundant Management Ability of Device
1.3 Physical Specifications
Item
DG-GS4628SE2
DG-GS4628HPSE2
Dimension (W * H *
D)（mm）
440 x 44 x 240
440 x 44 x 320
Weight
<6kg
<6kg
Fixed ports
24 100/1000Base-TX auto negotiation ethernet
ports
4 10Gb optical ports
20 100/1000Base-TX auto negotiation ethernet
ports
4 1000Mb Combo ports
4 10Gb optical ports
Management ports
1 Console port, 1 network management port which supports 1000Mb rate
System power
DG-GS4600SE2 series support AC power input:
AC input:
The rating voltage range: 100V~240V AC; 50/60HZ
The max voltage range: 90V~264V AC; 47HZ～63HZ
Output power
Do not support
Support
packet’s DSCP and COS values. The traffic can be classified by port, VLAN, DSCP, IP
precedence and ACL table. User can also modify packet’s DSCP and IP precedence
values. Users can specify different bandwidths for voice/data/video to customize
different qualities of service.
DG-GS4600SE2 series support SNMP, In-band and Out-of band Manageme
nt, CLI and WEB interface and RMON. It can mail the correlative sensitive infor
mation to the administrator abide by SMTP protocol. DG-GS4600SE2 series supp
ort SSH protocol, ensure the configuration management security of the switch.
DG-GS4600SE2 series of switches support two AC power which have the b
ackup function if one of them is fault. The power is hot swappable that improves
the expansibility and flexibility of the power system.
DG-GS4600SE2 series have the network 1000Mb management port. It can
upgrade the device through the common business electrical port or the network
management port. It can also login the network management web page through t
he common business electrical port or the network management port.
Chapter 1-3
DG-GS4600SE2 Installation Guide
supply of PoE
The max Power
Consumption
<30 W
<440W(370W POE is the maximum power
supply)
Fan
Support automatic timing
Support automatic timing
Operating
Temperature
0℃~50℃
0℃~50℃
Relative Humidity
10％~95％
10％~95％
Item
DG-GS4652SE2
Dimension (W * H *
D)（mm）
440 x 44 x 240
Weight
<6kg
Fixed ports
48 100/1000Base-TX auto negotiation ethernet ports
4 10Gb optical ports
Management ports
1 Console port, 1 network management port which supports 1000Mb rate
System power
DG-GS4600SE2series support AC power input:
AC input:
The rating voltage range: 100V~240V AC; 50/60HZ
The max voltage range: 90V~264V AC; 47HZ～63HZ
The max Power
Consumption
<50 W
Fan
Support automatic timing
Operating
Temperature
0℃~50℃
Relative Humidity
10％~95％
Item
DG-GS4628FSE2
Dimension (W * H *
D)（mm）
440×240×44
Weight
3.85kg
Fixed ports
8 1000Mb Combo ports, 16 1Gb optical ports , 4 10Gb optical ports
Management ports
1 Console port, 1 network management port which supports 1000Mb rate
Table 1- 2 Physical Specifications
Table 1- 3 Physical Specifications
Chapter 1-4
Loading...