Digisol DG-GS4200 Series, DG-GS4228, DG-GS4228P, DG-GS4628HPE-P, DG-GS4628E2 Installation Manual

DG-GS4200 Series

GIGA LAYER 2 SWITCHES

Installation Guide

As our products undergo continuous development the specifications are subject to change without prior notice

V1.0

2018-09-24

DG-GS4200 Installation Guide

Content

Chapter 1 Introduction ............................................................. 1-1

1.1 Product Brief ................................................................................... 1-1

1.2 Physical Specifications .................................................................. 1-1

1.3 Description of Hardware ................................................................ 1-2

1.3.1 Front Panel .............................................................................................. 1-2

1.3.2 Back Panel ............................................................................................... 1-3

1.3.3 Status LEDs ............................................................................................. 1-3

1.3.4 Front Panel Port Description ................................................................. 1-5

Chapter 2 Hardware Installation.............................................. 2-1

2.1 Installation Notice........................................................................... 2-1

2.1.1 Environmental Requirements ................................................................ 2-1

2.1.2 Installation Notice ................................................................................... 2-4

2.1.3 Security Warnings .................................................................................. 2-5

2.2 Installation Preparation .................................................................. 2-6

2.2.1 Verify the Package Contents ................................................................. 2-6

2.2.2 Required Tools and Materials ................................................................ 2-6

2.3 Installation Guide ........................................................................... 2-6

2.3.1 Installing the Switch ............................................................................... 2-6

2.3.2 Connecting Console ............................................................................... 2-7

2.3.3 SFP Transceiver Installation .................................................................. 2-8

2.3.4 Copper Cable/Fiber Cable Connection ................................................. 2-8

2.3.5 Power Supply Connection ..................................................................... 2-9

2

DG-GS4200 Installation Guide

Chapter 1 Introduction

1.1 Product Brief

DG-GS4200 series switches are 1000Mb uplink layer 2 switches. DG-GS4228
provides 28 fixed ports (24 10/100/1000Base-T fixed ports and 4 1000Mb SFP ports).
DG-GS4228P provides 28 fixed ports (24 10/100/1000Base-T fixed ports and 4 1000Mb
SFP ports), support 24 1000M ports of POE power supply. DG-GS4200 series switches
with advanced intelligent and secure features, can serve ideally as distribution layer
switches for the access device of campus networks, enterprise networks and IP
metropolitan networks.

DG-GS4200 series switches including the following 2 series switch:

Fig 1-1 DG-GS4228 Switch

Fig 1-2 DG-GS4228P Switch

1.2 Physical Specifications

 Management Port

1 RJ-45 serial console port
 AC Power Input

100 ～ 240VAC, 50Hz ～ 60Hz
 Power Consumption

DG-GS4228: <30W

DG-GS4228P: <250W
 Operating Temperature

-5 °C～50°C

1-1

DG-GS4200 Installation Guide

 Storage Temperature

-40°C～ 70°C

 Relative Humidity

5%～95%, no condensate
 Dimension

DG-GS4228: W×D×H 440mm×230mm×44mm

DG-GS4228P: W×D×H 440mm×260mm×44mm
 Weight

DG-GS4228: 3.00±0.1kg

DG-GS4228P: 4.20±0.1kg
 Average no trouble time

At least 21, 0000 hours MTBF

1.3 Description of Hardware

1.3.1 Front Panel

DG-GS4228 provides 24 10/100/1000Base-T ports, 4 1000Mb SFP ports,30 LEDs,1
Console port.

The front panel of DG-GS4228 is shown as follow:

Fig1-3 Front Panel of DG-GS4228

DG-GS4228P provides 24 10/100/1000Base-T ports, 4 1000Mb SFP ports, 53
LEDs,1 Console port.

The front panel of DG-GS4228P is shown as follow:

Fig 1-4 Front Panel of DG-GS4228P

1-2

DG-GS4200 Installation Guide

Panel Symbol

Status

Description

Port1-24(Link/Act)
On (Green)

The port is linked successfully

Flash (Green)

The port is linked successfully, and
receive/send data

Off

The port is not link

1.3.2 Back Panel

The back panel of DG-GS4228 is shown below, and there is 1 220V AC power socket
and 1 grounding screw.

Fig 1-5 Back Panel of DG-GS4228

The back panel of DG-GS4228P is shown below, and there is 1 220V AC power
socket and 1 grounding screw.

Fig 1-6 Back Panel of DG-GS4228P

1.3.3 Status LEDs

DG-GS4200 series switches include port indicator and system status indicator, as
shown in below and described in the following table.

1.3.3.1 Port Indicator Description

Fig 1-7 DG-GS4228 LED diagram

1-3

DG-GS4200 Installation Guide

Port25-28(Link/Act)

On (Green)

SFP port is linked successfully

Flash (Green)

SFP port is linked successfully, and
receive/send data

Off

SFP port is not link

Panel Symbol

Status

Description

Port1-24(Link/Act)
On (Green)

The port is linked successfully

Flash (Green)

The port is linked successfully, and
receive/send data

Off

The port is not link

Port25-28(Link/Act)

On (Green)

SFP port is linked successfully

Flash (Green)

SFP port is linked successfully, and
receive/send data

Off

SFP port is not link

Port1-24(PoE Status)
On (Yellow)

The port supply POE successfully

Off

The port doesn`t supply POE or supply POE
failed

Table 1-1 DG-GS4228 port indicator description

Fig 1-8 DG-GS4228P LED diagram

Table 1-2 DG-GS4228P port indicator description

1.3.3.2 System Status Indicator Description

1-4