Digisine Energytech 6K5X1304960 User Manual

Full-Digital Bluetooth
Hearing Aid

Accessories Listing

1

1. Bluetooth Hearing Aid with Earphone x 1
(Left- Blue / Right- Red)

2. Storage Case x 1

3. USB Adapter x 1

4. Micro USB cable x 1

5. Clearing Brush x 1

2

5

3

Wearing Instruction

2. To Turn Off the hearing aid switch the switch \

1. Insert the Red earphone
into the Right ear and
Blue earphone into the
Left ear.

ear buds are tightly
fitted in the ear canal to
avoid feedback noise.

2. Turn the hearing aid on and start adjusting the
volume to suit your hearing loss needs.

3. Clip the hearing aid on the collar/pocket to avoid

4

the microphone from coming into contact with
other moving parts that may amplify static sound.
Ensure the microphone of the hearing aid is not
covered by any obstructions to get the best
quality sound to be received.

Insure that the

to the Bottom. Once properly turned on there
will be an indicator that will flash Red and Blue
three times. You will than hear your surrounding’s
sound gradually fade from your preset volume.

※ The hearing aid will keep the last preset setting

so when you power on the hearing aid again, it
will automatically preset the same mode as the
last time you turned off the hearing aid.

※ When the battery is too low, the device may not

be turn on. Please charge the device and then
turn on the device.

How to Charge

1. Connect the provided micro USB cable’s USB
head to the USB adapter then plug the USB
adapter to an AC outlet before connecting the
micro USB head to the hearing aid for charging.

2. A Red light will light up on the hearing aid
indicating its recharging, once fully charged the
red light will be turned off automatically.

Features

Volume Controller

Mode Switch /
Bluetooth Pairing

Power Switch
(Top - On, Bottom -Off )

Indicator(Built-in)

Micro USB
Charging Socket

Earphone

Microphone

Collar Clip

Powering On and Off the hearing aid

1. To Turn On the hearing aid switch the switch to
the Top.Once properly turned on there will be an

indicator that will flash Red and Blue three times.
You will then hear your
surrounding’s sound
gradually increasing
from a low volume to
a your preset volume.
The Blue light will
continuously flash
which indicates that the hearing aid is working.

Indicator(Built-in)

Warning:

※ Please don’t recharge the hearing aid in high

temperature environment or in direct sun light.

※ When RED light on the hearing aid start flashing,

it indicates that hearing aid is almost out of power.
We suggest you recharge the battery at this point
to preserve the batteries long life span.

Rechargeable Battery

Notice

Troubleshooting

The built-in rechargeable battery will take an average
of 3~4 hours to reach full capacity when using the
provided USB adapter.

expect up to 15 hours of continuous use.

We strongly recommend replacing the rechargeable
battery once every 2 years in-order to get the best
results from your hearing aid. Please do not attempt
to replace the battery yourself as this may cause
damage to your hearing aid, contact your supplier for
battery replacement inquiries.

Once fully charged you can

Adjusting the Volume

“Click” to adjust volume

There are 11 sets of volumes for your convenience.
There is noticeable beep sound to allow you to know
which level the setting is in currently.

Click the : Increase volume

Click the : Decrease volume

※ Caution : Listening at a high volume may damage

your hearing further.

Noise Cancellation Mode Switching

※ Please don't try any other methods that have not

been written out in the manual we enclosed. It may
cause injuries or damage the devices.

※ Please keep the hearing aid out of reach from child

and people who don't know how to operate the
hearing aid.

※ Please don't use it while you are sleeping. It may

cause accidental physical damage or discomforts.

※ Please don't wear the hearing aid while doing physi

cal exercise. It may cause damage to the hearing
aid.

※ Keep the device dry at all times. Keep away from

any sort of liquids.

※ Concerning the disposal of hearing aids or

batteries, please obey the regulations of the local
administration.

Before and After Each Use

Before

Clean your ear
thoroughly

After

Remove all debris from ear
cap. Ensure the hole on the
side of the cap is also free
of any debris.

Symptom

No sound

No working after
press any button

Cannot be
charging

Cannot turn
power on

The indicator
doesn’t light up

Solution

Turn on the power
Press “ + “ to increase level
Clean up ear cap
Check the earphone cable
if breakor not

Check if there is any stuff
stuck in

Make sure if USB adapter
connects well

Make sure to switch to the
“Left” position and make
sure the indicator light is
correct.
Connect USB adapter to
charge
If rechargeable battery is
used for over 2 years, we
suggest to use new one

If there is no other function
issue, please contact your
supplier

Click: for Mode switching

There are two preset modes and will switch between
each other when the mode button (indicated in
between the 2 volume button’s with the letter ).
A single beep after clicking the M will indicate you are
in Mode 1 and 2 beeps will indicate you are in Mode 2.

Mode 1: Standard setting for common situation.

Mode 2: Noise cancelling for reducing noise in

crowned environments.

Specification

Max. Output Sound Level Gain : 45 ± 5dB
Continuous Use : Up to 15 hours per charge
Operating Temperature : +10
Humidity : 30~85% RH
Storage Temperature : -10

Size (L/W/H) : Approx. 44 x 13.6 x 32.5 mm
Weight : Approx. 22.2 g

Humidity : 30~85% RH

o

C ~ +40oC

o

C~ +60oC