DIGI-SENSE DIGI-SENSE WD-20250-92 Manual

User Manual

THE STANDARD IN PRECISION MEASUREMENT

Dual-Input Data Logging
Thermometers

with NIST-Traceable Calibration

Thermocouple Meter,
Type J/K/T Input

Model 20250-92

Thermistor Meter

Model 20250-94

RTD Meter

Model 20250-96

99 Washington Street
Melrose, MA 02176

Phone [phone]
Toll Free 1-800-517-8431

Visit us at www.TestEquipmentDepot.com

Introduction

The Digi-Sense Dual-Input Thermometers with Data
Logging (20250-92, -94, -96) offer fast response and
high accuracy. Advanced features include data logging,
USB interface, relative time clock, offset compensation,
temperature differential, data Hold, Max/Min/Avg readings,
and auto power-off. The instrument is fully tested and
calibrated to NIST-traceable standards. Careful use of this
meter will provide years of reliable service.

Unpacking

Carefully unpack the instrument and accessories from
shipping package. Check individual parts against the list
of items below. If anything is missing or damaged, please
contact your instrument supplier immediately.

1. Meter

2. USB cable

3. Software

4. Soft carrying case

5. Lanyard

6. One 9 volt battery

7. User manual

8. NIST-traceable calibration report with data

2

Key Features

• Large backlit display shows any combination of
T1, T2, T1–T2; plus Max, Min, and Avg readings

• Relative time clock on Max/Min/Avg provides a
time reference for major events

• Electronic Offset function allows compensation of
probe errors to maximize overall accuracy

• USB interface

• Data logging capacity of 16,000 sampling points

• User-selectable readout in °C or °F

• Automatic power-off (sleep) mode conserves battery life

• Dual sensor inputs; accept a wide variety of probes

3

Meter Description

1. Up () button

2. Down () button

3. MODE (Max/Min/Avg/Dif)

button

4. SET button

5. Backlight button

6. LOG (data logging) button

7. Data HOLD button

8. CAL (offset/calibration)
button

9. Power on/off button

10. LCD

11. Temperature sensor

inputs (2)

4

Display Layout

1. Hold icon

2. Low-battery indicator

3. MAX icon

4. MIN icon

5. AVG icon

6. DIF icon

7. User-selectable tempera-

ture units (°C or °F)

8. Low alarm icon

9. High alarm icon

10. Real-time clock

11. Data logging icon

12. T2 temperature value

13. T2 input icon

14. T2 input type (J, K, T;
20250-92 only)

15. T1 temperature value

16. T1 input icon

17. T1 input type (J, K, T;
20250-92 only)

5