DIGI-SENSE DIGI-SENSE 08642-42 Manual

SPECIFICATIONS
Display: ½"-High LCD showing minutes
and seconds Accuracy: 0.01% Timing Capacity: Count down – 1 second to
99 minutes, 59 seconds
Count-up – 1 second to
one minute Functions: Countdown timing and
count-up (stopwatch) timing Attachments: Clip, magnetic back, and
stand Size: 2½" x 2¼" x ½" Weight: 1.5 oz
COUNTDOWN TIMING
1. Press the STOP/RESET button to set timer to zero. The display should read 00:00.
2. Press the numbers keys 0 through 9 to set desired minutes and seconds. (Example: To set 12 minutes 38 sec­onds, press 1, 2, 3, 8.)
Note: To time in seconds only, press just two of the number keys. (Example: To set 15 seconds, press keys 1 and 5.)
3. If the wrong time has been entered, press the STOP/RESET button to return the dis­play to 00.00.
4. Once the desired time is on the display, press the START button to begin count­down timing.
5. When the timer reaches 00:00, an alarm will sound. The alarm will sound for 60 seconds and then turn off automatically. To turn the alarm off manually, press any button or number key.
Note: The display will read 00.00 during the 60 second alarm sounding time and after the alarm is turned off.
6. During the countdown process, the timer may be paused by pressing the STOP/ RESET button one time and restarted by pressing the START button.
Note: Pressing the STOP/RESET button twice, will clear the display and return it to
00.00.
STOPWATCH (COUNT-UP) TIMING
1. Press the STOP/RESET button to set the timer to zero. The display should read
00.00.
2. Press the START button once to begin count-up timing.
Note: Timer will count up to 59 minutes, 59 seconds and then automatically reset itself to zero – the display will read 00.00 for one second and then start counting up
3. During the count-up process, the timer may be paused by pressing the STOP/ RESET button one time and restarted by pressing the START button.
Note: Pressing the STOP/RESET button twice, will clear the display and return it to
00.00.
4. To end the count-up process at any time, press the STOP/RESET button twice.
TIMEOUT
The timing process may be stopped at any time during count-up or countdown. Press the STOP/RESET button one time. Timing may be resumed by pressing the START button. Note: Pressing the STOP/RESET button twice, will clear the display and return it to
00.00.
ALL OPERATIONAL DIFFICULTIES
If this timer does not function properly for any reason, please replace the bat­tery with a new high quality battery (see
“Battery replacement” section). Low battery power can occasionally cause any num­ber of “apparent” operational difficulties. Replacing the battery with a new fresh bat­tery will solve most difficulties.
BATTERY REPLACEMENT
An incorrect display, no display or operational difficulties indicate that the battery should be replaced. Use a coin to open the battery cover on the back of the timer (turn the cover approximately of a turn counter-clockwise). Equivalent battery replacements are: RAYOVAC RW42, DURACELL D357, GPA76, and EVEREADY
357. Insert the battery with the positive side facing you. Replace the battery cover.
© 2016 92-7010-40 Rev. 0 072617
Mini-Alarm-
Timer/
Stopwatch
Instructions
99 Washington Street Melrose, MA 02176
Phone 781-665-1400 Toll Free 1-800-517-8431
Visit us at www.TestEquipmentDepot.com
Loading...