SPECIFICATIONS
Mode: 8” stem length
Range: -58 to 302 °F / -50 to 150 °C
Model: 11.4” stem length
Range: -58 to 482 °F / -50 to 250 °C
Resolution: 0.1° from -20° to 200°
(both models)
1° otherwise
OPERATION
Remove the stem from the protective sheath.
Slide the ON/OFF switch to ON to turn the unit
on. Slide the °F/°C switch to °F to display the
temperature in Fahrenheit or to °C to display the
temperature in Celsius. Insert the stem of the
thermometer into the material to be measured.
Slide the ON/OFF switch to OFF to turn the unit off.
Replace the protective sheath. To conserve battery
life, always turn the unit off when not in use.
ALL OPERATIONAL DIFFICULTIES
If this thermometer does not function properly for
any reason, replace the battery with a new highquality battery (see the “Battery Replacement” section). Low battery power can occasionally cause
DQ\QXPEHURI³DSSDUHQW´RSHUDWLRQDOGLI¿FXOWLHV
Replacing the battery with a new fresh battery will
VROYHPRVWGLI¿FXOWLHV
BATTERY REPLACEMENT
Erratic readings, a faint display, or no display, are
all indicators that the battery must be replaced.
Remove the battery cap, located at the top of
the unit by turning it in the direction of the arrow
(counterclockwise). Remove the exhausted battery and replace with a new 1.5 volt silver oxide
size 357 battery. Make certain the positive (+)
side is visible. Replace the battery cover. Do not
overtighten the cap.
Find Quality Products Online at: sales@GlobalTestSupply.com
www.GlobalTestSupply.com
Loading...