DigiSender DX2000-LCD, Plug'n'Go LCD User Manual

WATCH A VIDEO

INSTALLATION

& TROUBLESHOOTING GUIDE

Available online at: www.aei.eu/video

WATCH A VIDEO

INSTALLATION

& TROUBLESHOOTING GUIDE

Available online at: www.aei.eu/video

080410-2

DigiSender

Plug’n’Go™ LCD

MODEL: DX2000-LCD

5.8GHz Single Input ‘Plug Style’ Wireless AV Sender

®

IMPORTANT: ALWAYS KEEP THIS INSTRUCTION MANUAL FOR FUTURE REFERENCE

DX2000-LCD - DigiSender® Plug’n’Go™ LCD

Please read this instruction manual carefully prior to installationPage 02

Table of Contents

Introduction 03
Step 1 - Unpack your Plug’n’Go™ LCD 04
Step 2 - Install the Transmitter 05
Step 3 - Install the Receiver 06
Step 4 - Using the Plug’n’Go™ LCD 07-08

Plug’n’Go™ LCD Advanced Function 08

Upgrades and Accessories 09
Troubleshooting 10-13

Picture Problems 10-11
Audio Problems 12
Problems Controlling Your Source Equipment 13

Technical Support 14
Declaration of Conformity 15

Please read this instruction manual carefully prior to installation Page 03

DX2000-LCD - DigiSender® Plug’n’Go™ LCD

Introduction

Congratulations on purchasing the DigiSender® Plug’n’Go™ LCD - 5.8GHz Single Input ‘Plug Style’
Wireless AV Sender. This product represents state of the art wireless audio and video technology at
exceptional value for money.

You can now enjoy DVD quality video and Hi-Fi stereo sound from your Satellite, Cable, Freeview, DVD
or VCR in another room in your home.

Benefit from Compact and Discrete Transmitter and Receiver units, 4 Audio/Video Channels and

unsurpassed ease of use with the new DigiSender® Plug’n’Go™ LCD!

DX2000-LCD - DigiSender® Plug’n’Go™ LCD

Please read this instruction manual carefully prior to installationPage 04

Step 1: Unpack Your DigiSender® Plug’n’Go™ LCD

All DigiSender® orders are computer weight checked when packed. However, it is a good idea to check
all kit contents are present before proceeding with the installation.

DX2000-LCD Transmitter

1. Transmitter Unit

2. Pre-Wired IR Emitter

3. DigiConnector™ SCART Input

DX2000-LCD Receiver

4. Receiver Unit

5. Pre-Wired IR Sensor

6. SCART Output

1.

2.

3.

4.

5.

6.

Please read this instruction manual carefully prior to installation Page 05

DX2000-LCD - DigiSender® Plug’n’Go™ LCD

Step 2: Install the Transmitter

Connect the Transmitter into a Mains Extension
Lead. The positioning of the Transmitter can affect

the picture quality so being able to move it is an
advantage.

2.

Connect the DigiConnector™ to your Satellite,
Cable or Freeview box. Use the SCART socket la-

belled ‘TV’ or ‘OUT’. Connect any existing SCART
lead into the rear of the DigiConnector™.

1.

The DX2000-LCD Transmitter will send the audio and video from a connected source (your Satellite
receiver for example) to the DX2000-LCD Receiver, located in another room in your home.

Press and hold the power button for 5 seconds to
turn the Transmitter on. Pressing the button again

cycles through the 4 available channels. Make sure
it is set to channel 1.

3.

Position the IR Emitter in front of your Satellite,
Cable or Freeview box with the lens facing the
equipment’s IR sensor.

4.