Digiplex EVO User Quick Reference Manual

User Quick Reference Guide

1. Enter your [ACCESS CODE] and then:
To Regular Arm: Press the [

ARM] key

(Arms entire area when all zones are closed).
To Force Arm: Press the [

FORCE] key

(Arms entire area without waiting for all zones to close)
To Stay Arm: Press the [

STAY] key

(Arms area’s perimeter only, which allows you to remain in the protected area)
To Instant Arm: Press the [5] key

(Stay arms the area but an alarm will occur instantly any zones open)

2. Select the desired area or press the [0] key for all areas

HOW TO ARM

ON = AC Power
OFF = Power failure

AC LIGHT

When green:
ON = Zones closed
OFF = Zone(s) open
Flash = Exit delay

When red:
ON = Area(s) armed
OFF = Area(s) disarmed
Flash = Alarm

STATUS LIGHT

The LCD will guide you
with detailed messages.

Use the arrow keys to
scroll the menu or choices.

Press the corresponding
one-touch button for 2
seconds to perform an
action without entering
your Access Code.

LCD Keypad

[CLEAR] = Erases current data entry or reverts to the preceding step
[

ENTER] = Saves current data and exits current menu

To send a silent or audible alarm to your security company, press and hold one of
the key combinations listed below for two seconds.

Some features in this Quick Start need to be activated by your installer.
We recommend that you test your security system on a weekly basis. Please refer to the appropriate user
manual

HOW TO DISARM

To Disarm when entering:

1. Enter your [

ACCESS CODE]

2. Select the area(s) if necessary

To Disarm from within the perimeter:

1. Enter your [

ACCESS CODE] and then

press the [

DISARM] key

2. Select the area(s) if necessary

PANIC KEYS

Panic Alarm Type Key Combinations

Police Keys [1] and [3]
Medical Keys [4] and [6]
Fire Keys [7] and [9]

HOW TO BYPASS ZONES ALARM MEMORY DISPLAY

When a zone is bypassed, it remains
unarmed once the corresponding area
is armed:

1. Enter your [

ACCESS CODE]

2. Press the [

BYP] key

3. Use the [S] or [T] keys to scroll
through the zones and then press
the [

BYP] for the desired zone

4. Press [

ENTER] to save and exit

To view the alarms that occurred
during the last armed period:

1. Press the [

MEM] key.

All zones that were breached
during the last armed period will
scroll on the screen

2. Press [

CLEAR] to exit

PARADOX.COM

Printed in Canada - 01/2009 K641-EQ07