Digimerge MNTZ36C Specsheet
MNTZ36C Ceiling Mount Bracket User’s Manual
□
Compatible with Digimerge Camera Models: DPZ36WO23 / DPZ36WO30
□
Usage Cautions and Warnings
Please read through the User Manual and all safety instructions prior to use.
• All the safety and operating instructions should be read before installing. Follow
all operating instructions.
• Installation must be performed by a trained professional.
• Do not use the product with cameras other than the recommended models.
• The mounting has to be installed onto a firm and stable location that can
support the weight of the camera and mount. Ensure all parts are completely secured.
• Do not use the product for other purposes.
Installation
MOUNT
SEAL TAPE
#8x38 SUS 4ea
Product Characteristics
This product has been designed to be used in the installation of speed dome cameras. This product has been
fabricated using strong, corrosion-free aluminum alloy material.
Prior To Installation
Avoid installing the mounting onto an unstable structure such as a gypsum wall panel. Install the mounting onto a strong structure
such as a concrete wall, steel beam, etc. Use concrete s
a concrete structure. Make sure that all the screw parts are metallic.
Avoid screwing too close to the edge of a piece of wood when screwing into a wooden structure.
crews with plugs or other installation tools when installing the mount onto
① Drill holes in the surface for the cables and mount screws and
run the cables through the cable hole.
② Run the cables through the mount and attach the mount to the
surface using the 8x38 screws (4ea).
③ Wrap seal tape around the threads at the top and bottom of
the conduit pipe. Run the cable through the conduit pipe and
screw the conduit pipe into the mount firmly to ensure a proper
seal.
④ Insert the rubber gasket between the camera adapter and the
adapter flange and connect the adapter flange to the camera
adapter using the PH M4x8 screws (4ea). Run the cables
through the camera adapter assembly, and screw the camera
adapter assembly onto the conduit pipe.
⑤ Install the camera into the camera adapter
(see instructions on back of sheet).
CONDUIT PIPE
SEAL TAPE
ADAPTER FLANGE
RUBBER GASKET
CAMERA ADAPTER
MS PH M4x8
SUS 4EA
NOTE: Camera installation requires the M4x12 mounting screws supplied
with the camera. Make sure the o-rings are attached to the mounting screws
and dome cover torx screws to prevent water ingress.
Accessories
Part Name
No
SCREW 8x38 (SUS)
1
SCREW PH M4x8 (SUS)
2
RUBBER GASKET (SILICON)
3
SEAL TAPE (12mm)
4
Q'ty
4
4
1
1
Description
- Aluminum & Steel body
- Unit : 1.5Kg
Dimensions
120
NOTE: Mount supports 1/4” NTP threaded conduit.
430
551
8
4-
121
90
Ø180
MNTZ36C Ceiling Mount Bracket User’s Manual
ATTENTION: Make sure the o-rings are attached to the mounting screws and dome cover torx screws to prevent water ingress.
Installing the camera into the camera adapter:
① Connect the cables inside the camera adapter.
② Loosen the dome cover torx screws (3ea) and remove the dome cover from the camera base.
③ Mount the camera base to the #1 holes in the camera adapter using the M4x12 screws (4ea) supplied with the camera with o-rings attached.
④ Attach the dome cover to the camera base using the dome cover torx screws (3ea) with o-rings attached.
Camera Adapter
Hole #1 4EA
Camera Base
O-Rings 4EA
M4x12 Screws 4EA
Dome Cover
O-Rings 3EA
Torx Screws 3EA
Loading...