Digimate L-1725 User Manual

17.0 TFT Active Matrix LCD Panel User Manual
English 2
Table of Content
Table of Content...................................................................................…2
Safety Instructions ..............................................................................…3
View of Monitor ....................................................................................... 4
Warning ................................................................................................... 6
Cleaning Notes........................................................................................ 7
Precaution ............................................................................................... 7
Features................................................................................................... 7
Hardware Installation ............................................................................. 8
Hardware Installation Step by Step....................................................... 9
Angle of Inclination .............................................................................. 11
Monitor Setup Button ........................................................................... 12
Troubleshooting.................................................................................... 13
OSD (On-Screen Display) Menu Mode (PC Mode) ............................. 13
Display Mode......................................................................................... 20
Specification ......................................................................................... 21
17.0 TFT Active Matrix LCD Panel User Manual
English 3
Safety Instructions
1. Please read these safety instructions carefully.
2. Please keep this User‘s Manual for later reference.
3. Please disconnect this equipment from connecter before cleaning. Don‘t use
liquid or sprayed detergent for cleaning. Use moisture sheet or cloth for
cleaning.
4. Make sure the voltage of the power source when you try to connect the
equipment to the power outlet.
5. All cautions and warnings on the equipment should be noted.
6. Never pour any liquid into opening, this could cause fire or electrical shock.
7. Never open the equipment. For safety reason, the equipment should only be
opened by qualified service personnel.
8. If one of the following situations arises, get the equipment checked by a service
personnel :
a. Liquid has penetrated into the equipment.
b. The equipment has been exposed to moisture.
c. The equipment has not work well or you can not get it work according to
user‘s manual.
d. The equipment has dropped and damaged.
d. If the equipment has obvious sign of breakage.
9. DO NOT LEAVE THIS EQUIPMENT IN AN ENVIRONMENT
UNCONDITIONED, STORAGE TEMPERATURE ABOVE 40°C, IT MAY DAMAGE THE EQUIPMENT.
10. Adaptor source :
a. Channel Well Technology, MODEL PAA050F.
b. Linearity Electronics co. LTD,MODEL LAD6019AB4
17.0 TFT Active Matrix LCD Panel User Manual
English 4
View of Monitor
Front View (1)
Back View (2)
17.0 TFT Active Matrix LCD Panel User Manual
English 5
View of Monitor
Side View (3)
15°
17.0 TFT Active Matrix LCD Panel User Manual
English 6
Unpacking
Thank you for your purchase. Please first check the following package content of
the 17” LCD monitor. Contact your dealer or store where you purchased the LCD
monitor if anything is missing.
17” TFT LCD Monitor
External Univ15 pin
D-sub
(RGB Analog) input
signal cable
*DVI. and Video are
optional*
Power Cord
AD / DC Adpter
External Universal
(DC 12V, 50 / 60Hz)
(AC 100-240V)
Audio Cable
with
Stereo Phone Jack
CD User’s Manual
Quick Start Guide
Warning
1. Make sure that the system power is turned off.
2. Plug the signal cable to the signal connector at the rear of PC.
3. Plug adapter output cable to the jack at the rear of LCD monitor and the
power cord to the adapter.
4. Connect the power cord to power source.
5. Turn on the computer and the monitor.
6. For the best display quality, we suggest that you set the resolution as
shown page 21 (Display Mode).
17.0 TFT Active Matrix LCD Panel User Manual
English 7
Cleaning Notes
1. Be gentle to clean the screen.
2. Never use any kind of corrosiveness chemical dissolvent to clean the
screen, it may hurt your screen surface.
3. We suggest that a camel hair brush or a soft, lint-free cloth be used to clean
the screen.
4. Don’t exert any pressure directly to the LCD screen.
Precaution
1. Do not expose the monitor to direct sunlight or heat.
2. Do not spill liquid on the monitor.
3. Do not attempt to open the monitor. You may be hurt by electric shock. For service, call your place of purchase.
4. Do not use your monitor when magnets or electronic products are operating nearby.
5. Do not use harsh chemicals or strong cleaning solvents to clean the monitor screen. Wipe it with clean, soft clothes applied with mild solution.
6. Do not place anything on your monitor. Bad ventilation may elevate temperature in the monitor.
7. Don’t use your fingers to touch the LCD screen, directly. Fingerprint contains oil and may be difficult to clean.
Features
Power Saving:
The power management complies with VESA DPMS standard. When the system is idle (Off Mode), the monitor automatically cut its power consumption to a level less than 5w.
Auto Adjustment Key Function:
With “AUTO” key, you can automatically adjust the display for your best view.
Wide Viewing Angle:
The horizontal 150°and vertical 125° offer you great screen view.
Plug and play compatibility:
With DDC1/DDC2B compliance, the monitor is plug and play compatible to Windows 95/98/me/2000/XP.
Space Saving:
The monitor is designed with 280 mm indepth to provide you with more hand room for desk working space.
Side-by-Side :
The monitor comes with 17.7 mm trimmed down frame to offer side-by-side operation
Loading...
+ 14 hidden pages