DIGILOGIC DVDVCR, DVDVCR1 User Manual
VCR/DVD player
To use the DVD player you will need to press the ‘DVD’ button on the remote control to choose DVD
mode.
To use the VCR you will need to press the ‘VCR’ button on the remote control to choose VCR mode.
The country region code for this DVD player is region ‘2’.
This player will only play discs that are labelled ‘2’ or ‘All’.
The region code is indicated on the disc and disc packaging.
The symbol ‘ ’ will appear on the screen if you select an operation that is not available.
Please wait a few seconds and try the operation again.
If the player still displays ‘ ’ this indicates that the operation you have selected is not available on
the disc you are playing.
User’s guide
Model number: DVDVCR1
Please read these instructions carefully and keep them in a safe place.
P/N: 97P95600PO-52
Contents
Product Information
Important Safeguards ..................................................... 1
Advantages of This Product Are .... ............................ 4
Read Carefully before Using ......................................... 5
Identification of Controls ............................................... 6
Remote Control ..............................................................10
Installation
Setting up your player...................................................11
Connecting your player through extra equipment
(satellite system) ............................................................ 12
Connecting your player to the Hi-Fi system .............13
How to connect your player to another player,
How to connect your player to a camcorder ............ 14
Connecting Dolby Digital Amp with Digital Audio
Out Jack ........................................................................... 15
2nd Scart Socket ............................................................. 16
Basic Operation
Initial Installation ........................................................... 17
Setting time and date / Auto clock ............................18
OSD ON & OFF / Output Select ................................ 19
DVD Playback ................................................................20
VCR Playback ................................................................ 21
Recording ........................................................................ 22
DVD Operation
Playing a desired scene ................................................35
Confirming the current PLAY mode on screen ....... 39
Selecting an AUDIO language, SUBTITLE language
and 3D AUDIO............................................................... 41
Selecting ZOOM and Multi Angle.............................. 42
About MP3 , JPG and MPG discs................................ 43
Displaying menus on a disc. ........................................ 47
Set-up
Language Setup.............................................................. 48
Video Setup ......................................................................50
Audio Setup..................................................................... 51
Other Setup .....................................................................52
The others
About DVD...................................................................... 54
Basic information about VCR and Videotape.......... 57
Trouble Shooting guide (VCR).................................... 58
Trouble Shooting guide (DVD) ................................... 60
Specifications ..................................................................61
VCR Operation
Tuning in New Stations ................................................ 24
Timer Recording ............................................................ 26
More Functions .............................................................. 29
Connections and Copying ........................................... 33
Important Safeguards
Product information
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
CAUTION: TO REDUCE THE RISK OF ELECTRIC
SHOCK, DO NOT REMOVE COVER (OR BACK). NO
USER-SERVICEABLE PARTS INSIDE. REFER
SERVICING TO QUALIFIED SERVICE PERSONNEL.
The lightning flash with arrowhead symbol,
within an equilateral triangle, is intended to
alert the user to the presence of uninsulated
“dangerous voltage” within the product’s
enclosure that may be of sufficient magnitude
to constitute a risk of electric shock.
The exclamation point within an equilateral
triangle is intended to alert the user to the
presence of important operating and servicing
instructions in the literature accompanying the
appliance.
WARNING : TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS
APPLIANCE TO RAIN OR MOISTURE.
IMPORTANT FOR LASER PRODUCTS
• LASER :
• DANGER :
• CAUTION : Do not open the top cover. There are no user
This Digital Video Disc Player employs a Laser System. To ensure proper use of this product
please read this instruction manual carefully and retain for future reference. Should the unit
require maintenance, contact an authorized service location - see service procedure.
Use of control adjustments or the performance of procedures other than those specified
may result in hazardous radiation exposure.
To prevent direct exposure to the laser beam, do not try to open the enclosure. Visible laser
radiation when open and interlocks defeated.
DO NOT STARE INTO THE BEAM.
Visible laser radiation when open and interlock failed or
defeated. Avoid direct exposure to beam.
serviceable parts inside the Unit; leave all servicing to
qualified service personnel.
CLASS 1 LASER PRODUCT
LUOKAN 1 LASERLAITE
KLASS 1 LASERAPPARAT
This set complies with the EMC Directive 89/336 and with the LVD Directive 73/23.
CAUTION: Any changes or modification in construction of this device which are not expressly approved by
the party responsible for compliance could void the user’s authority to operate the equipment.
• Only use this unit in moderate climates, not in tropical climates.
• Do not place naked flame sources such as candles on the unit.
• Make sure the unit is placed at least 8cm away from the other home appliances or obstacles in
order to allow sufficient ventilation around the unit.
• This unit should not be exposed to drips or splashes and no objects filled with liquids, such as
vases, should be placed on this unit.
• Switching it off does not disconnect it from the mains (stand-by). To disconnect it from the
mains, you have to unplug it.
• The system is not completely disconnected from the mains when the / I button is set to
the position.
1
Important Safeguards
This set has been designed and manufactured to assure
personal safety. Improper use can result in electric shock
surfaces may cause the product and cart
combination to overturn.
or fire hazard. The safeguards incorporated in this unit
will protect you if you observe the following procedures
for installation, use and servicing. This unit is fully
transistorised and does not contain any parts that can be
repaired by the user.
8 VENTILATION
Slots and openings in the case are provided for
ventilation to ensure reliable operation of the unit
and to protect it from overheating. These openings
must not be blocked or covered. These openings
1 READ INSTRUCTIONS
All the safety and operating instructions should be
read before the unit is operated.
must not be blocked by placing the unit on a bed,
sofa, rug, or other similar surface. This unit should
never be placed near or over a radiator or heat
radiator. This unit should not be placed in a built-in
2 RETAIN INSTRUCTIONS
The safety and operating instructions should be
retained for future reference.
3 HEED WARNINGS
All warnings on the unit and in the operating
instructions should be adhered to.
installation such as a bookcase or rack unless proper
ventilation is provided or the manufacturer’s
instructions have been adhered to.
9 POWER SOURCES
This unit should be operated only from the type of
power source indicated on the rating label. If you are
not sure of the type of power supply to your home,
4 FOLLOW INSTRUCTIONS
All operating and use instructions should be
followed.
consult your dealer or local power company. For
units intended to operate from battery power, or
other sources, refer to the operating instructions.
5 ATTACHMENTS
Do not use attachments unless recommended by the
unit’s manufacturer as they may cause hazards.
6 WATER AND MOISTURE
Do not use this unit near water- for example, near a
bath tub, wash bowl, kitchen sink or laundry tub, in
a wet basement, or near a swimming pool.
7 ACCESSORIES
Do not place this unit on an unstable cart, stand,
tripod, bracket, or table. The
unit may fall, causing serious
PORTABLE CART WARNING
(symbol provided by RETAC)
injury to a child or adult as
well as serious damage to the
unit. Use this unit only with a
cart, stand , tripod, bracket,
or table recommended by the manufacturer.
7A
A unit and cart combination should be moved
with care. Quick stops, excessive force, and uneven
10 MAINS PLUG
We have fitted this unit with a standard mains plug.
• If the mains lead gets damaged it must be replaced
by a qualified service agent with an approved lead
of the same type.
• If the plug is cut off, remove the fuse from the plug
and get rid of it safely, as if you put it into a supply
socket it would be dangerous.
• If you change the plug because the standard plug
is damaged or unsuitable, please destroy the old
plug as it would be dangerous if plugged into a
live power outlet. Follow the wiring instructions
supplied with the new plug.
11 POWER-CORD PROTECTION
You must make sure the mains lead cannot be
walked on, crushed, chafed, cut, and so on.
12 LIGHTNING
For added protection for this unit during a lightning
storm, or when the unit is left unattended and
2
Product information
Important Safeguards
unused for long periods of time, unplug it from the
wall outlet and disconnect the antenna or cable
system. This will prevent damage to the unit due to
lightning and power line surges.
13 DISC TRAY
Keep your fingers well clear of the disc tray as it is
closing.
14 OBJECT AND LIQUID ENTRY
Never push objects of any kind into this unit
through openings as they may touch dangerous
voltage points or “short-out” parts that could result
in a fire or electric shock. Never spill liquid of any
kind on the unit.
15 BURDEN
Do not place a heavy object on or step on the
product. The object may fall, causing serious
personal injury and serious damage to the product.
E. If the unit has been dropped or the cabinet has
been damaged.
18 REPLACEMENT PARTS
When replacement parts are required, have the
service technician verify that the replacements he
uses have the same safety characteristics as the
original parts. Use of replacements specified by the
unit manufacturer.
19 SAFETY CHECK
Upon completion of any service or repairs to this
unit, ask the service technician to perform safety
checks recommended by the manufacturer to
determine that the unit is in safe operating
condition.
20 HEAT
The product should be situated away from heat
sources such as radiators, stoves, or other products
(including amplifiers) that produce heat.
16 DISC
Do not use a cracked, deformed or repaired disc.
These discs are easily broken and may cause
personal injury and product malfunction.
17 DAMAGE REQUIRING SERVICE
Unplug this unit from the wall outlet and refer
servicing to qualified service personnel under the
following conditions.
A. When the power-supply cord or plug is
damaged.
B. If liquid has been spilled, or objects have fallen
into the unit.
C. If the unit has been exposed to rain or water.
D. If the unit does not operate normally by
following the operating instructions. Adjust
only those controls that are covered by the
operating instructions. Improper adjustment of
other controls may result in damage and will
often require work by a qualified technician to
restore the unit to its normal operation.
21 NORMAL USE
This product is only designed for household or
similar general use. Any other use may invalidate
the guarantee and could be dangerous.
MAINS FUSE IN THE UK
If you use a 13 amp (BS 1363 type) plug, you must have
a 3 amp (BS1362 type) fuse fitted. For any other type of
plug or connection, you must fit a fuse rated between 3
and 5 amps in the mains plug or adapter, or at the fuse
box feeding this unit.
EUROPEAN SYMBOLS
This unit is double insulated and
an earth connection is not
required.
This unit complies with
European safety and electrical
interference directives.
3
Advantages of This Product Are .....
• DVD, VCD, CD, CD-R(MP3), CD-RW, VHS
• Repeat playback (title, chapter, and part for
• Watching DVD and recording broadcasts
• Integrated remote control (VCR, DVD)
• Selective Play (DVD/VCD/CD)
• VISS function
• Multiplex sound playback/record
• High Sound Quality of 6 head Hi-Fi
• 6 languages OSD (On Screen Display)
• Simple record function
• MP3 file playback function (CD-R disc having
records of MP3 files)
• GUI (Graphical User Interface) through OSD
• Parental Lock function (DVD)
(On Screen Display)
By using the [DISPLAY] button on the remote
control, information on the DVD/VCD/CD player
and disc, can be displayed on the TV screen.
• Multi Audio function (DVD)
• Screensaver function (DVD)
• 3D sound (3D sound effect using 2 speakers)
• High bit / High sampling with 27MHz / 10bit
video encoder
• Multi Subtitle function (DVD)
• High bit / High sampling with 96MHz / 24bit
Audio D/A Converter
• Coaxial, Optical digital Audio output (PCM,
Dolby Digital, dts)
You can enjoy high-level digital audio by
connecting with an amplifier embedded with
Dolby Digital / dts decoder.
• Multi Angle function (DVD)
• Built-in Dolby Digital decoder (DVD)
• Analog audio 2-channels output for
DOWNMIX (x1)
• Screen zoom function (DVD/VCD)
• Composite video output (x1)
• Slow Forward / Reverse playback (DVD)
• Fast Forward / Reverse playback
• Search of title, chapter, and time in DVD disc,
and search of time and track time in VCD
• Various TV aspect (DVD)
4:3 for Pan and Scan, 4:3 for Letter Box, and 16:9 for
Wide
DVD/ track, disc, and part for VCD/CD)
You can select and play the desired title / chapter
of DVD and track of Video CD/CD in STOP mode.
function (DVD)
You can select and display OSD in 6 languages.
(E / F / S/ G/ I / D)
This function can prevent playback of software
that may be unsuitable for children.
The audio soundtrack can be heard in up to 8
languages. In the case of SVCD or VCD, it depends
on the disc. (The number of audio languages
depends on the software.)
The subtitle can be seem in up to 32 languages. In
the case of SVCD or VCD, it depends on the disc.
(The number of subtitle languages depends on the
software.)
This function allows you to choose the viewing
angle of scenes which were shot from a number of
different angles. (The number of angles depends
on the software.)
4
Read Carefully before Using
Product information
Cautions in use of DVD-Video player are described below.
Please read carefully before using a DVD-Video player.
• For checking, contact your dealer or your nearest
✔ Installation place and handling
• When you place this player near other devices,
they may affect poorly together.
•
When you place DVD-Video player above or below
a TV, it may cause flickering of pictures or failure
(tape is not ejected).
• When you place this player near strong magnetic
materials, it may affect image or voice poorly or
damage recording.
•
Do not spill volatile liquids like insect spray over
the player. Do not leave rubber or plastic products in
contact with the player for a long time. They will
cause deterioration or paint to peel-off.
✔ Not in use
• When the unit is not in use, be sure to remove the
disc or tape and turn off the power.
•
If you do not use the unit for a long period, remove
batteries in remote control to prevent leakage.
• If you don’t use the unit for a long time, the unit
may not function properly in the future. Turn on
and use the player occasionally.
✔ Moving
• Repack the unit as it was originally packed at the
factory. Alternatively, pack this product with
towel to prevent transit damage.
• Eject any videotape.
✔ Cleaning
• Dust off dirt in cabinet or control panel part
smoothly with a soft cloth.
• For heavy dirt, soak the cloth in a weak detergent
solution, wring it well and wipe. Use a dry cloth
to wipe it out.
• Follow instructions in using chemical cleaners.
• Do not use any type of solvent such as gasoline or
benzene, as they may cause deterioration or paint
to peel-off.
✔ Checking and Replacement of Antenna
• The antenna is subject to change in its direction
✔ Recording important pictures
•
✔ Copyright
• Do not use your recordings without permission
✔ Tape and Disc Handling
•
- Tape with mold
- Tape or disc stained with juice or food particles
- Tape having breakage connection
- Disassembled tape
- Disc with severe scratch
• Moisture condensation may occur on tape.
• After use, store tape vertically in a case to
• Do not store in the following places.
- High temperature and humidity
- Subject to generation of mold
- Subject to direct sunlight
- In dirt or dust
-
and maintenance every 1,000 hours of use by
technical engineers.
service centre.
or damage by wind and rain. For a clear picture,
contact and consult your nearest aerial rigger
about checking and replacement.
Be sure to record the screen and check whether
recording is performed properly. Bad recordings
can result if using poor quality tapes.
of a copyrighter except personal usage.
Do not use any tape and disc in conditions listed
below. Damage of video head or cut/coiling of tape
may cause failure.
Moisture condensation damages the tape. Only
use the tape after the moisture condensation has
disappeared.
prevent the tape from becoming loose.
Near strong magnetic materials such as a speaker
✔ Checking
• The video is a high precision device. To obtain a
clear picture, we recommend regular inspection
5
Identification of Controls
!
%
& *
)
12
3 4 5
^
@#
$
(
Main body (front panel)
!
POWER (STANDBY/ON) button
Use to power the device on/off if AC power supply
is connected.
@
Place to insert videotape
#
Disc tray
$
VIDEO INPUT jack
%
AUDIO INPUT jack
^
EJECT button
&
RECORD button
*
Programme Down/Up button
(
Operation Display Window
Display operation of device. For more information,
see “Operation Display Window” in 7p.
)
SELECT button
Use to change DVD mode to VCR mode, and vice
versa.
1
STOP button
Use to stop playing.
2
REWIND button
Use to rewind currently being played, videotape or
disc; or to review.
3
Playback/PAUSE button
Playback videotape or disc.
Press this button to pause a screen.
4
FAST FORWARD button
Use to wind currently being played videotape or
disc; or to playback rapidly.
5
OPEN/CLOSE Tray button
6
Identification of Controls
Operation Display Window
- RECORDING MODE - - REPEA T MODE -
Product information
- DVD OPERA TION -
Timer Recording Standby
Timer Recording Error
Recording in Progress
Timer Recording in
Progress
Recording Pause
DVD playback
Fast playback
- VCR OPERA TION -
Repeat one chapter
Repeat track
Repeat title
Repeat ALL
[VCD]
[DVD]
[VCD]
[DVD]
Repeat a defined period
from A
[DVD, VCD]
Repeat a defined period
from A to B
[DVD, VCD]
VCR playback
Fast forward
Fast reverse playback
Slow playback
Pause picture
Rewinding
Fast playback (CUE)
Fast reverse playback
(REVIEW)
Slow playback
Still picture
Stop
Child Lock
7
Identification of Controls
!
#
*
&
^
@
$
%
Main body (Rear Panel)
!
POWER CORD
It is a jack for supplying power to the unit.
Connect to outlet in a wall.
@
EURO AV2/DECODER scart socket
^
Connection to ANTENNA Cable
&
Connection to TV
*
EURO AV1 scart socket
#
VIDEO OUTPUT phono socket
$
AUDIO OUTPUT phono socket
%
DIGITAL OUTPUT (OPTICAL/COAXIAL) Jack
To enjoy sound quality of theatre level in home,
connect this jack with amp or unit embedded
with digital audio decoder.
✔
Disposal of Used Electrical &Electronic Equipment
The meaning of the symbol on the product, its accessory or packaging indicates that
thisproduct shall not be treated as household waste. Please, dispose of this equipment at your
applicable collection point for the recycling of electrical & electronic equipments waste. In the
European Union and Other European countries which there are separate collection systems
for used electrical and electronic product. By ensuring the correct disposal of this product,
you will help prevent potentially hazardous to the environment and to human health, which
could otherwise be caused by unsuitable waste handling of this product. The recycling of
materials will help conserve natural resources. Please do not therefore dispose of your old
electrical and electronic equipment with your household waste. For more detailed
information about recycling of this product, please contact your local city office, your
household waste disposal service or the shop where you purchased the product.
8
Accessories
AAA
AAA
Product information
Identification of Controls
Remote control 2 Batteries RF cable
Scart cable
Instruction
Manual
• To purchase accessories or not supplied additional parts, contact your nearest dealer or service centre.
N.B.: Owner’s manual and warranty are not sold additionally.
Instructions in using REMOTE
• Operate remote control within 7m from the unit.
• Do not press 2(two) buttons at the same time.
• Excessive sun light falling on the remote receiver may cause the remote control to become inoperative.
• Do not keep in the place with much dust and humidity.
✔
Remote control battery installation
Detach the battery cover on the rear of the
remote control, and insert two AAA
batteries with the + and - ends aligned
correctly.
Two “AAA”
batteries
(supplied).
✔
Caution
• Danger of explosion if battery is incorrectly replaced.
• For the best performance we recommend the use of “Alkaline” batteries. Do not use rechargeable
batteries.
• When installing the batteries please observe the correct polarity as indicated in the battery
compartment.
• If the unit is not being used for a long period of time remove the batteries, as batteries may leak and
cause damage.
• When replacing batteries replace all the batteries at the same time with the same type, never mix old
and new batteries.
• Dispose of used batteries safely.
9
Remote Control
!
#
@
$
%
^
&
(
)
2
4
5
7
9
“
#
‘
=
q
w
e
R
r
T
Y
0
+
E
t
y
W
Q
*
3
1
6
8
[DVD]
!
@
#
$
%
^
&
*
(
)
1
2
3
4
5
6
7
8
OPEN/CLOSE button,
VCR SELECT button
[DVD, VCR]
button
SYSTEM button (This button is not available for this set)
SETUP button
[DVD, VCR]
Up/Down button
[DVD]
[DVD]
button
[DVD]
REVERSE SEARCH button
PLAY/PAUSE button
[DVD]
or track)
[VCR]
[VCR]
[VCR]
[DVD]
[VCR]
[VCR]
NUMBER button,
MOVE/SELECT in OSD,
TITLE /PBC button
AUDIO LANGUAGE Select,
SUBTITLE Select button
PREVIOUS button (move into a previous chapter
Record SPEED button
Record button
TV/VCR button
3D button
CM SKIP
Replay button
[VCR]
EJECT button
[VCR]
TRACKING -/+
[VCR]
[VCR]
Channel
AUDIO Select
Child Lock !
Press the power [ ] button of the remote for about
5 seconds. No buttons of front panel can be operated
now and Lock indicator (“ ”) will be
displayed on window display. To release child lock,
press any button on the remote control.
POWER ON
Player will POWER ON if any button on the
remote control is pressed.
9
POWER button
0
DVD SELECT button
[VCR]
“
‘
+
=
Q
q
W
w
E
e
R
r
T
t
Y
y
INPUT Selection button
CLEAR button
[DVD, VCR]
OK/ENTER button
[DVD]
[DVD]
[DVD]
FORWARD SEARCH button
STOP button
[DVD]
[VCR]
[DVD]
[DVD]
[DVD]
[DVD]
[DVD, VCR]
[VCR]
TV channel which was being watched.)
OSD DISPLAY button
MENU button
Chapter/Title/Time SEARCH button
ZOOM button
NEXT button (Move into a next chapter or track) ,
Frame Advance button in pause mode
REPEAT Playback button
REPEAT a defined period from A to B button
ANGLE button
MARK button
PROGRAMME button
LAST CHANNEL button (Return to the previous
10
Setting up your player
■ Before you start, unplug all the equipment from the mains supply.
(Option 1) - Connecting your player through RF lead
Television
Installation
200-240V~,
50/60 Hz
Back view of your player
Aerial
The type of aerial you
should use, depends on
local interference and how
far you are from the
transmitter. You should
contact a local retailer if you
have any questions about
your aerial.
(Option 2) - Connecting your player through a scart lead
Television
200-240V~,
50/60 Hz
Aerial
With this connection, if your player is receiving CH BBC1 and your TV is displaying CH3, when you press the
[TV/VCR] button on the remote control, your TV will automatically display the CH BBC1. “VCR” will be
shown in the display.
In this mode, to change the viewing channels the [PR-] and [PR+] buttons on the player remote need to be used.
To switch off this mode press [TV/VCR] on the remote control, TV remote can now be used as normal. You will
get better pictures and sound quality if you connect your player using a scart lead.
Scart lead (supplied)
Back view of your player
11
Connecting your player through
extra equipment (satellite system)
■ Before you start, unplug all the equipment from the mains supply.
(Option 1) - Connecting your player through RF lead
Television
200-240V~,
50/60 Hz
Back view of your player
Satellite
You can use this connection if your player has two scart sockets. This will improve sound and picture quality
when you are recording from satellite.
Aerial
12
Connecting your player to the Hi-Fi system
■ Before you start, unplug all the equipment from the mains supply.
Option 1
Television
Aerial
Hi-Fi
200-240V~,
50/60 Hz
Player
You can also use a scart lead to improve picture and sound quality from your player.
Plug a phono cable into the
“Audio L/R” sockets on the
back panel and into the audio
sockets on any audio
amplifier, if needed. If your
player does not have this
connection, see page 15.
Installation
Option 2
200-240V~,
50/60 Hz
Player
Television
Aerial
Hi-Fi
If required, plug a scart to
phono cable into the “AV1”
socket on the back panel and
into the audio socket on any
audio amplifier.
13
How to connect your player to another player
■ Before you start, unplug all the equipment from the mains supply.
How to connect
First player
200-240V~,
50/60 Hz
connect a scart lead
from player to second
VCR
1) Insert the tape you wish to record on into the first player and press [INPUT] until “AV1” appears on the front
display.
2) Insert the tape you wish to copy from into the second player. Press the [PLAY] button on the second player.
3) Press the [RECORD] button on the first player.
The player will start recording.
If your player has two scart sockets, you can use the other socket “AV2” to connect other equipment.
To use this function, see page 16.
Second player
How to connect your player to a camcorder
■ Before you start, unplug all the equipment from the mains supply.
How to connect
200-240V~,
50/60 Hz
Player
Television
Camcorder
to
camcorder
Scart Plug to
TV
Aerial
If you have connected your camcorder in this way, you can also connect a scart lead from “AV2” on the
back panel of the player to the television. To use this function, see page 16.
You can also connect the camcorder by using a phono cable if your player has front input sockets.
Check the front of your player for this connection, see page 16.
14
Connecting Dolby Digital Amp with
(L) AUDIO IN (R)
Digital Audio Out Jack
How to connect
REAR PANEL OF DVD-VIDEO
Installation
CONNECTING CABLE
(Not supplied)
Home Theatre Receiver with Dolby Digital decoding capability
1 Select either COAXIAL or OPTICAL to connect to amp of Dolby Digital.
1
** If you want to know about “Dolby Digital”, please refer to [About DVD] in 54-56p.
Manufactured under license from Dolby Laboratories.
"Dolby" and the double-D symbol are trademarks of Dolby Laboratories.
“DTS” and “DTS Digital Out” are trademarks of Digital Theatre Systems, Inc.
15
2nd scart socket
2nd scart socket
If your video has the AV2 output, shown in the diagram below, you can connect other equipment as seen on
pages 12-15.
2nd scart
When connecting other equipment please refer to their manuals for further information. This video manual
recommends the set up as shown on page 12. If the equipment is turned off when connected by this method, the
video behaves as normal, but if the equipment is turned on the video will automatically switch over to AV2
mode and displays the channel of the other equipment, channel selection can only be performed by the other
equipment, the video PR+/PR- buttons have no effect.
To return to normal video use the other equipment must be turned off.
INPUT ONLY
INPUT+OUTPUT
Recording from other Equipment.
Simple recording can be performed, ensure the equipment is turned on and is displaying the correct channel.
Timer recording, set the video to perform a timed recording ensuring AV1 is selected as the channel to be
recorded. Some equipment may have a timer which allows it to be powered on to the correct channel, if this
feature is not available the other equipment should be left powered on.
16
Front AV
If the video has front input sockets, it is possible to connect devices such as a
camcorder to the video. To watch a camcorder tape the video must be in
AVF mode. Recordings of this input are the same as described on page 14.
Initial Installation
■ Switch the TV on.
■ You can also start "AUTO SET" in the SETUP "PR PRESET"
■ To tune in new stations (manual tuning) and to enter station names see page 24-25.
Setting up the player
You should see this picture the first time you switch on the TV
1
and player.
➝
"AUTO SET".
AUTO SET
2
3
4
OK for "AUTO SET!".
"AUTO SET" tunes in all the stations you can receive in your
country.
Clock is automatically set.
If other stations are positioned on near the current RF OUTPUT
CH, the guide message appears automatically.
The player recommends the optimal RF OUTPUT CH number
automatically.
Press the [OK] button to confirm the recommended PR.
Should you wish the stations to have the same numbers as those
used on the TV, follow the instructions in "Sorting programme
locations" on page 25.
OK:CONFIRM SETUP:END
CH 25
PLEASE WAIT...
SETUP:END
RF OUTPUT SET
CURRENT CH 52
RECOMMENDED CH 54
0-9:SELECT(21-69)
OK:CONFIRM SETUP:END
IMPORTANT!
PLEASE CHANGE THE TV
CH TO 54.
Basic Operation
Otherwise ...
exit the basic installation function and enjoy your player.
• If you don´t see this picture, because you don´t use a SCART cable,
search this picture now (CH 52) with the station tuning functions of
your TV set (see its user manual).
• In case of interference problems on CH 52, type in an
other transmission channel between 21 and 69 using
the number buttons.
MANUAL SET
PR01 P-O1 PR08 P-08
PR02 P-02 PR09 P-09
PR03 P-03 PR10 P-10
PR04 P-04 PR11 P-11
PR05 P-05 PR12 ---PR06 P-06 PR13 ---PR07 P-07 PR14 ----
PR+/-:SELECT
OK:CONFIRM SETUP:END
17
Setting time and date
Setting time and date
■ Press [VCR] button on the remote control to change into VCR Mode and follow the procedure
below.
Call up the player’s "SETUP" menu,
1
2
choose "VCR SETUP", then "CLOCK SET".
Move to the position you want to change and type in the
new values.
Wait a few seconds after typing a one-digit number.
Store with [OK] button and exit with [SETUP] button.
Auto clock
CLOCK SET
TIME - - : - DATE - - / - - /- - - -
0-9:SETUP (HOUR)
➝
/➝:CORRECT SETUP:END
CLOCK SET
TIME 06:05
DATE 08/05/2005(SUN)
0-9:SETUP (HOUR)
➝
/➝:CORRECT
OK:CONFIRM SETUP:END
Setting Auto clock
■ Auto Clock is only available for models with the VPS/PDC function (see page 26).
Some broadcasting stations may send the time and date along with the VPS/PDC data. The video will
automatically use this time and date during the initial setting up procedure during normal use, and every
time you switch the video off at the mains. If you find that this time and date is incorrect you can remove
this feature by following the steps below changing it to OFF mode, you will then have to manually set the
time and date, see above.
VCR SETUP
CLOCK SET
RF OUTPUT SET
16:9 SET
OSD ON/OFF
AUTO CLOCK
PR+/-:SELECT
OK:CONFIRM SETUP:END
AUTO CLOCK
ON
OFF
PR+/-:SELECT
OK:CONFIRM SETUP:END
18
Loading...