Digilock DCK1-ATV1 Product Manual

Product Guide

Keypad Cam Locks Advanced Security

Shared Use

DCK1-ATV1

Keypad cam locks operate by entry of a 4-digit code. In shared use functionality, the user chooses any available locker, enters a self­selected code, then rotates the knob/lever to the locked position. To unlock, the user enters the same self-selected code, then rotates
the knob/lever to the unlocked position. Once unlocked, the locker is available for a different user. Management staff operates the lock
with either the Programming Key unique to the lock system or any registered Manager Key.

Lock Parts

Front Unit

Unlocked Position

Rear Unit

Key Slot

Locked Position

Rear Cover

Vertical Body

DCK1-ATV1 with Knob

LED Usage Indicator

Alpha Numeric Keypad

Key Symbol ButtonC Button

Knob

Rear Cover Screw
Cam

Key Slot

C Button

Unlocked Position

Locked Position

LED Usage Indicator

Alpha Numeric Keypad

Key Symbol Button

Lever

Vertical Body

DCK1-ATV1 with Lever

Keys

■

Registers Manager Keys

■

Provides lock access in case of forgotten/lost user

credential (code or key)

■

Allows management audit/inspection

■

Provides external power in case of battery failure

■

1 Programming Key required per lock system

Key Insertion

Vertical Body

Digilock logo must face up on vertical body locks.

Manager KeyProgramming Key

■

Provides lock access in case of forgotten/lost

user credential (code or key)

■

Allows management audit/inspection

■

Provides external power in case of battery failure

■

Up to 25 Manager Keys may be registered

per lock

User Key

■

Operates the lock instead of

User Code

■

ADA compliant*

*US Access Board requires 5% of all

locks to be ADA compliant.

Phone: [phone]

www.digilock.com | [e-mail]

Product Guide

Keypad Cam Locks Advanced Security

Shared Use

DCK1-ATV1

Programming Instructions

Initial Setup

New locks operate only with = `. Locks must be setup to allow full operation.

a. Touch the Programming Key to the key slot until a two-tone beep is heard and the LED turns on.
b. Touch each Manager Key to the key slot. A two-tone beep will be heard for each Manager Key that is

successfully registered.

c. Touch the Programming Key to the key slot until a two-tone beep is heard and the LED turns off.
d. Repeat above steps for each lock or follow Express Register instructions to setup all locks.

Express Register

Manager Key(s) can be quickly registered to multiple locks. The Programming Key copies the registered Manager Key(s) from one
lock to multiple locks.

a. Go to the lock registered with the Manager Key(s).
b. Press = ` 66 `. The LED will start to flash.
c. Touch the Programming Key to the key slot until a two-tone beep is heard and the LED turns off.
d. At each lock to be registered, touch the Programming Key to the key slot until a two-tone beep is heard and the LED

flashes once to indicate successful registration.

e. End express registration.* Go to any registered lock and press = ` then touch the Programming Key to the key

slot to operate the lock.

*The Programming Key will continue to function in express registration mode until it is used to operate a lock.

Register/Add Manager Key(s)

Up to 25 Manager Keys may be registered to a lock. If required, contact your Digilock Product Representative to order additional
Manager Key(s).

a. Go to a lock requiring Manager Key(s).
b. Press = ` 55 `. The LED will start to flash.
c. Touch the Programming Key to the key slot until a two-tone beep is heard and the LED turns on.
d. Touch each Manager Key to the key slot. A two-tone beep will be heard for each Manager Key that is

successfully registered.

e. Touch the Programming Key to the key slot until a two-tone beep is heard and the LED turns off.
f. Repeat above steps for each lock or follow Express Register instructions to register the same Manager Key(s) to

multiple locks.

Phone: [phone]

www.digilock.com | [e-mail]