Digilent 410-115P User Manual
PPmmooddRRJJ4455™™
CCoonnnneeccttoorr MMoodduulleess
RReeffeerreennccee MMaannuuaal
Revision: August 14, 2007
Note: This document applies to REV A of the boards.
l
Overview
The PmodRJ45 Connector Modules can link
any Digilent Pmod to any AVR-based or
FPGA-based Digilent board via a 6-pin header
port. The RJ45 modules come as a pair of
male and female boards.
Functional Description
The RJ45 modules are useful when a Pmod
needs to be separated from its host device
farther than a Pmod extension cable allows.
The RJ45 modules can be linked by any
commercially-available networking cable.
The male RJ45 module plugs into a port on a
control board such as the Nexys or Cerebot.
The female RJ45 module connects to any
Pmod. When a networking cable is plugged
into both the male and female modules, a
direct link is made between the control board
and the Pmod.
www.digilentinc.com
215 E Main Suite D | Pullman, WA 99163
(509) 334 6306 Voice and Fax
PmodRJ45 (Female) Circuit Diagram
PmodRJ45 (Male) Circuit Diagram
®
Doc: 502-114 page 1 of 1
Copyright Digilent, Inc. All rights reserved. Other product and company names mentioned may be trademarks of their respective owners.
Loading...