How it Works
Digihome
Loading...
LED19914HD

Digihome LED19914HD Operating Instructions Manual

LED19914HD
OPERATING INSTRUCTIONS
COLOUR TELEVISION WITH REMOTE CONTROL
English - 1 -
Contents
Inserting Batteries ............................................... 4
Repair Information .............................................. 5
Connecting to a DVD Player via Component
USB Memory Connection ..................................11
Operation with the Buttons on the TV ............... 12
Volume Setting .............................................. 12
Programme Selection ................................... 12
AV Mode ....................................................... 12
Operation with the Remote Control .................. 12
Volume Setting .............................................. 12
Programme Selection (Previous or Next
Programme) .................................................. 12
Programme Selection (Direct Access) .......... 12
Auto Channel Scan (Retune) Menu Operation .... 13
Digital Manual Search....................................... 14
Analogue Manual Search ................................. 14
Analogue Fine Tune.......................................... 14
Operating the Channel List ............................... 14
Moving a Channel ............................................. 15
Deleting a Channel ........................................... 15
Renaming a Channel ........................................ 15
Locking a Channel ............................................ 15
Button Functions ............................................... 15
Viewing Videos via USB .................................. 16
Viewing Photos via USB ................................... 17
Playing Music via USB ..................................... 17
Media Browser Settings .................................... 17
Operating Picture Settings Menu Items ............ 19
Picture Settings Menu Items ............................. 19
PC Picture Settings........................................... 19
Operating Sound Settings Menu Items ............. 20
Sound Settings Menu Items.............................. 20
Operating Settings Menu Items ........................ 21
Viewing Conditional Access Menu (*) ............... 21
Language Settings ............................................ 22
Parental Settings Menu Operation ................... 22
Setting Sleep Timer .......................................... 22
Setting Programme Timers ............................... 23
Adding a Timer .............................................. 23
Editing a Timer .............................................. 23
Deleting a Timer ............................................ 23
Operation .......................................................... 24
Digital Teletext (** for UK only) ......................... 25
Analogue Teletext ............................................. 25
Appendix B: AV and HDMI Signal Compatibility
Appendix D: Supported File Formats for USB
English - 2 -
Package Contents
SLEEP
SCREEN LANG. SUBTITLE
ABC
DEF
GHI
JKL
MNO PQR
STU
VWX YZ
M
RETURN
INFO
FAV
0
1
2
3
4
5
6
7
8
9
OK
SOURCE PRESETS
EPG
Remote Control
LED TV
Batteries: 2 X AAA
Instruction Book
1 X Video & Audio Connection Cable
Note: You should check the accessories after purchasing. Make sure that each accessory is
included.
Features
Remote controlled colour LED TV.•
Fully integrated Terrestrial digital TV (DVB-T - MPEG2, • MPEG4)
HDMI connectors for digital video and audio. This •
connection is also designed to accept high denition
signals.
USB input.•
1000 programmes (analogue+digital).•
OSD menu system.•
Integrated tuner MPEG 2, MPEG 4 compatible.•
Scart socket for external devices (such as video, • video games, audio set, etc.).
Stereo sound system. (Nicam)•
Teletext, fastext, TOP text.•
Headphone connection.•
Automatic programming system.•
Forward or backward manual tuning.•
Sleep timer / Child lock.•
Automatic sound mute when no transmission.•
NTSC playback. •
AVL (Automatic Volu me Limiting).•
Auto power down.•
PLL (Frequency Search).•
PC input. •
Plug&Play for Windows 98, ME, 2000, XP, Vista, • Windows 7.
Game Mode •
Introduction
Thank you for choosing this product. This manual will guide you for the proper operation of your TV. Before operating the TV, please read this manual thoroughly. Please do keep this manual in a safe place for future references.
This device is intended to receive and display TV programs. The different connection options make an additional expansion of the reception and display sources possible (receiver, DVD player, DVD recorder, VCR, PC etc.).
This device is only suitable for dry, indoor use. This appliance is intended solely for private domestic use and may not be used for industrial and commercial purposes. We exclude liability in principle, if the device
is not used as intended, or unauthorized modications
have been made. To operate your LED TV in extreme ambient conditions may cause the damage of the device.
Preparation
For ventilation, leave a free space of at least 10 cm all around the set. To prevent any fault and unsafe situations, please do not place any objects on top of the set. Use this device in moderate climates.
10 cm
10 cm
10 cm
English - 3 -
Safety Precautions
Read th e followin g r ecommende d s afety precautions carefully for your safety.
Power Source
The TV set should be operated only from a 220-240V AC, 50 Hz outlet. Ensure that you select the correct voltage setting for your convenience.
Power Cord
Do not place the set, a piece of furniture, etc. on the power cord (mains lead) or pinch the cord. Handle the power cord by the plug. Do not unplug the appliance by pulling from the power cord and never touch the power cord with wet hands as this could cause a short circuit or electric shock. Never make a knot in the cord or tie it with other cords. The power cords should be placed in such a way that they are not likely to be stepped on. A damaged
power cord can cause re or give you an electric shock.
When it is damaged and needs to be replaced, it should
be done by qualied personnel.
Moisture and Water
Do not use this device in a humid and damp place (avoid the bathroom, the sink in the kitchen, and near the washing machine). Do not expose this device to rain or water, as this may be dangerous and do not place objects filled with
liquids, such as ower vases, on top.
Avoid from dripping or splashing.
If any solid object or liquid falls into the cabinet, unplug
the TV and have it checked by qualied personnel
before operating it any further.
Cleaning
Before cleaning, unplug the TV set from the wall outlet. Do not use liquid or aerosol cleaners. Use soft and dry cloth.
Ventilation
The slots and openings on the TV set are intended for ventilation and to ensure reliable operation. To prevent overheating, these openings must not be blocked or covered in anyway.
Heat and Flames
The set should not be placed near to
open ames and sources of intense heat
such as an electric heater. Ensure that
no open ame sources, such as lighted
candles, are placed on top of the TV. Batteries should not be exposed to excessive heat such as sunshine,
re or the like.
Lightning
In case of storm and lightning or when going on holiday, disconnect the power cord from the wall outlet.
Replacement Parts
When replacement parts are required, make sure that the service technician has used replacement parts
which are specied by the manufacturer or have the same specications as the original one. Unauthorized substitutions may result in re, electrical shock or
other hazards.
Servicing
Please refer all servicing to qualied
personnel. Do not remove the cover yourself as this may result in an electric shock.
Waste Disposal
Instructions for waste disposal:•
• Packaging and packaging aids are recyclable
and should principally be recycled. Packaging materials, such as a foil bag, must be kept away from children.
• Batteries, including those which are heavy metal-
free, should not be disposed of with household waste. Please dispose of used batteries in an environmentally friendly manner. Find out about the legal regulations which apply in your area.
Do not try to recharge batteries, there is a danger •
of explosion. Replace batteries only with the same or equivalent type.
Information for users in EU Countries
This symbol on the product or on its packaging means that your electrical and electronic device should be disposed at the end of its service life separately from your household wastes. There are separate collection systems for recycling in the EU. For more information, please contact the local aut h ority or the de a ler whe re you purchased the product.
Disconnecting the Device
The mains plug is used to disconnect the TV set from the mains and therefore it must remain readily operable.
Headphone Volume
Excessive sound pressure from earphones and headphones can cause hearing loss.
English - 4 -
Installation
To prevent injury, this device must be securely attached to the wall in accordance with the installation instructions when mounted to the wall (if the option is available).
LCD Screen
The LCD panel is a very high technology product with
about a million thin lm transistors, giving you ne
picture details. Occasionally, a few non-active pixels
may appear on the screen as a xed blue, green or
red point. Please note that this does not affect the performance of your product.
Warning! Do not leave your TV in standby or operating mode when you leave your house.
Connection to a Television Distribution System (Cable TV etc.) from Tuner
Devices connected to the protective earthing of the building through the mains connection or through other apparatus with a connection to protective earthing-and to a television distribution system using coaxial cable, may in some circumstances create a
re hazard.
Connection to a cable distribution system has therefore to be provided through a device providing electrical isolation below a certain frequency range (galvanic isolator, see EN 60728-11).
Licence Notication (Optional)
M a nuf a ct u r ed u n der l i cen s e fr o m D o lby Laboratories.
TRADEMARK ACKNOWLEDGMENT
“Dolby” and the double-D symbol are trademarks of Dolby Laboratories.
Note:The HDMI connection between PC and TV may cause radio interference in which case it is recommended to use VGA(DSUB-15) connection.
The Standby On/Off button does not completely switch off this device, it will still consume power. In order to fully switch off this device, the power should be switched off at the mains socket. Because of this the device should be set up in a way, that unobstructed access to the mains socket is guaranteed, so that in case of an emergency the mains plug can be
pulled out immediately. To exclude the danger of re,
the power cord should be removed from the mains socket prior to a long period of non-use, i.e. during vacations.
Electrical device not in the hands of children
Nev er let ch ildren use an y electr ical de vice unsupervised. Children cannot always recognize possible dangers. Batteries / accumulators can be life threatening when swallowed. Store batteries out of the reach of small children. In case of swallowing a battery medical aid has to be sought immediately. Also keep the packaging foils away from children, as there is danger of suffocation.
Remote Control Handset
Inserting Batteries
Remove the battery cover located on the back of • the handset by gently pulling backwards from the indicated part.
Insert two • AAA/R3 or equivalent type batteries inside. Observe the correct polarity (+/-) when inserting batteries and replace the battery cover.
Note: Remove the batteries from the remote control handset when it is not to be used for a long period. Otherwise it can be damaged due to any leakage of batteries. Remote range is approximately 7m/23ft.
English - 5 -
Environmental Information
This television is designed to consume less energy to save environment. •
You not only help to save the environment but also you can save money by reducing electricity bills thanks to the
energy efciency feauture of this TV. To reduce energy consumption, you should take the following steps:
You can use Power Save Mode setting, located in the Feature menu. If you set Power Save Mode as On, • the TV will switch to energy-saving mode and luminance level of TV set will be decreased to optimum level. Note that some picture settings will be unavailable to be changed when the TV is in Power Save Mode.
When the TV is not in use, please switch off or disconnect the TV from the mains plug. This will also reduce • energy consumption.
Disconnect power when going away for longer time.•
Note that annually, using the TV set in Power Save Mode has more power efciency than disconnecting the •
TV from the mains plug instead of keeping stand-by mode. Therefore it is highly recommended to activate Power Save Mode setting to reduce your annual power consumption.And also it is recommended to disconnect the TV from the mains plug to save energy more when you do not use.
• Please helps us to save environment by following these steps.
Repair Information
Please refer all servicing to qualied personnel. Only qualied personnel must repair the TV. Please contact
your local dealer, where you have purchased this TV for further information.
English - 6 -
Remote Control Buttons
SLEEP
SCREEN LANG. SUBTITLE
ABC
DEF
GHI
JKL
MNO PQR
STU
VWX YZ
M
RETURN
INFO
FAV
0
1
2
3
4
5
6
7
8
9
OK
SOURCE PRESETS
EPG
Standby1.
Yellow button2.
Blue button3.
Return / Exit menu / Index Page (in TXT mode)4.
Navigation buttons5.
OK / Channel list6.
Picture mode selection7.
EPG (Programme Guide)8.
Programme Up / Down9.
Numeric buttons10.
Previous programme11.
Subtitle on/off12.
Sleep timer13.
Teletext / Mix14.
No function 15.
Green button16.
Red button17.
Menu On/Off18.
AV / Source19.
Info20.
Volume Up/Down21.
Mute22.
Favourite mode23.
Mono-Stereo / Dual I-II24.
Image Size25.
Media Browser26.
No function27.
English - 7 -
LED TV and Operating Buttons
FRONT and REAR VIEW
Control buttons VIEW
Control Buttons
P\V-AV
1. Standby Off/On button
2. TV/AV button
3. Programme Up/Down buttons-
Volume Up/Down buttons
Note:You can use +/- buttons to change volume. If you want to change channels, press P/V/ AV button once and then use +/- buttons. If you hold the P/V/ AV button about a few seconds, source OSD will be displayed. Main menu OS D cannot be displayed via control buttons.
Viewing the Connections - Back Connectors
HDMI 1
SPDIF
Coax.OUT
HDMI 1: HDMI Input1. HDMI Input are for connecting a device that has an HDMI socket. Your LED TV is capable of displaying
High Denition pictures from devices such as a High Denition Satellite Receiver or DVD Player. These
devices must be connected via the HDMI sockets or Component Socket. These sockets can accept either 720p or 1080p signals. No sound connection is needed for an HDMI to HDMI connection.
RF Input2. connects to an aerial antenna system. Note that if you use a decoder or a media recorder, you should connect the aerial cable through the device to the television with an appropriate antenna cable, as shown in the illustration in the following pages.
SCART 3. input or output for external devices. Connect the SCART cable between SCART socket on TV and SCART socket on your external device (such as a decoder, a VCR or a DVD player).
Note: If an external device is connected via the SCART socket, the TV will automatically switch to AV mode. Note: S-VHS signal is supported via the scart socket.
Note: When receiving DTV channels (Mpeg4 H.264) or while in Media Browser mode, output will not be
available via the scart socket.
English - 8 -
PC Input4. is for connecting a personal computer to the TV set. Connect the PC cable between the PC INPUT on the TV and the PC output on your PC.
Note: You can use YPbPr to VGA cable (not supplied) to enable YPbPr signal via PC input. WARNING: You cannot use PC and YPbPr at the same time.
S/PDIF Coaxial Out5. outputs digital audio signals of the currently watched source. Use an SPDIF coaxial cable to transfer audio signals to a device that has S/PDIF input
Viewing the Connections - Side Connectors
CI Slot is used for inserting a CI card. A CI card allows you to view all the 1. channels that you subscribe to. For more information, see “Conditional Access” section.
USB input.2.
TV control buttons.3.
Side audio-video connection4. input is used for connecting video and audio signals of external devices. To make a video connection, you must use the supplied AV connection cable for enabling connection. First, plug singular
jack of the cable to the TV’s Side AV socket. Afterwards, insert your video cable’s (not supplied) connector into the YELLOW input (located on the
plural side) of the supplied AV connection cable. Colours of the connected jacks should match.
To enable audio connection, you must use RED and WHITE inputs of
the side AV connection cable. Afterwards, insert your device’s audio cable’s connectors into the RED and WHITE jack of the supplied side AV
connection cable. Colours of the connected jacks should match.
Note: You should use audio inputs of side AV connection cable (RED & WHITE) to enable sound connection when connecting a device to your TV by using PC or COMPONENT VIDEO input.
Headphone jack is used for connecting an external headphone to the 5. system. Connect to the HEADPHONE jack to listen to the TV from headphones (optional).
Aerial Connection
Connect the aerial or cable TV plug to the AERIAL INPUT socket located at the rear of the TV.•
HDMI 1
SPDIF
Coax.OUT
Power Connection
IMPORTANT: The TV set is designed to operate on 220-240V AC, 50 Hz.
After unpacking, allow the TV set to reach the ambient room temperature before you connect the set to the • mains. Plug the power cable to the mains socket outlet.
USB
5Vdc
Max:500mA
P\V-AV
SIDE AV
English - 9 -
Switching On/Off
To Switch the TV On
Connect the power cord to the 220-240V AC 50 Hz. • Then the standby LED lights up. (The led will blink during the standby On/Off)
To switch on the TV from standby mode either:•
Press the “• ” button, P+ / P- or a numeric button on the remote control.
Press the “• ” button, - or + button on the TV. The TV will then switch on.
• When the mains power is rst connected to the device the light on the front of the unit will start ashing for few seconds, when it stops ashing (remains
constant) the TV will be in standby mode.
Note: If you switch on your TV via PROGRAMME UP/DOWN buttons on the remote control or on the TV set, the programme that you were watching last will be reselected.
By either method the TV will switch on.
Note: When the device is coming out of standby the
light on the front of the unit will ash until the picture
appears. If you activate the power operation again
(before the light has had time to stop ashing) the
device will turn off into stndaby mode again. This is normal operation and not a fault
To Switch the TV Off
Press the “• ” button on the remote control or press the “ ” switch on the TV, the TV will switch
to standby mode.
To power down the TV completely, unplug the • power cord from the mains socket.
Note: When the TV is switched to standby mode, standby LED can blink to indicate that features such as Standby Search, Over Air Download or Timer is active.
Note: The standby light will blink while the TV is powering up from Standby mode.
First Time Installation
IMPORTANT: Ensure that the aerial is connected before switching on the TV for the first time installation.
When the TV is operated for the rst time, the •
installation wizard will guide you through the process. First, language selection screen will be displayed:
Use “• ” or “ ” buttons to select your language and press OK button to set the selected language and continue.
After selecting the language, “• Welcome!” screen will be displayed, requiring you to set Country, Teletext Language and Scan Encrypted options.
By pressing “• ” or “ ” button, select the country you want to set and press “ ” button to highlight Teletext Language option. Use “ ” or “ ” button to select desired Teletext Language.
Press “• ” button after setting Teletext Language option. Scan Encrypted will be then highlighted. You can set Scan Encrypted as Yes if you want to scan coded stations.Afterwards select the desired Teletext Language.
Press • OK button on the remote control to continue and the following message will be displayed on the screen:
Loading...
+ 23 hidden pages
Buy Points How it Works FAQ Contact Us Questions and Suggestions Privacy Policy Cookie Policy Terms of Use