Digihome LCD32914FHD SaorView Operating Instructions Manual

LCD32914FHD
OPERATING INSTRUCTIONSOPERATING INSTRUCTIONS
COLOUR TELEVISION WITH
REMOTE CONTROL
English - 1 -
Package Contents .................................................. 2
Features ................................................................. 2
Introduction ............................................................. 2
Preparation ............................................................. 2
Safety Precautions ................................................. 3
Information for users in EU Countries .................... 3
Remote Control Handset ........................................ 4
Inserting Batteries ............................................... 4
Environmental Information ..................................... 5
Repair Information .............................................. 5
Remote Control Buttons ......................................... 6
LCD TV and Operating Buttons .............................. 7
Viewing the Connections - Back Connectors ......... 7
Viewing the Connections - Side Connectors .......... 8
Aerial Connection ................................................... 8
Switching On/Off ..................................................... 9
To Switch the TV On ........................................... 9
To Switch the TV Off ........................................... 9
First Time Installation.............................................. 9
Connecting to a DVD player via HDMI ................. 10
Connecting to a DVD Player................................. 10
Connecting the LCD TV to a PC ............................11
Using Side AV Connectors ....................................11
USB Memory Connection ......................................11
USB Memory Connection ..................................11
Input Selection ...................................................... 12
Basic Operations .................................................. 12
Operation with the Buttons on the TV ............... 12
Operation with the Remote Control .................. 12
Viewing Electronic Programme Guide (EPG) ....... 12
Installation ............................................................ 13
Auto Channel Scan (Retune) Menu Operation .... 13
Manual Tuning ..................................................... 14
Digital Manual Search....................................... 14
Analogue Manual Search ................................. 14
Analogue Fine Tune.......................................... 14
Managing Stations: Channel List .......................... 14
Operating the Channel List ............................... 14
Moving a Channel ............................................. 15
Deleting a Channel ........................................... 15
Renaming a Channel ........................................ 15
Locking a Channel ............................................ 15
Managing Stations: Favourites ............................. 15
Button Functions ............................................... 15
Managing Stations: Sorting Channel List ............. 15
On-Screen Information ......................................... 16
Media Playback Using Media Browser ................. 16
Viewing Videos via USB .................................. 16
Viewing Photos via USB ................................... 17
Media Browser Settings .................................... 17
Changing Image Size: Picture Formats ................ 18
Confi guring Picture Settings ................................. 19
Operating Picture Settings Menu Items ............ 19
Picture Settings Menu Items ............................. 19
PC Picture Settings........................................... 19
Confi guring Sound Settings .................................. 20
Operating Sound Settings Menu Items ............. 20
Sound Settings Menu Items.............................. 20
Confi guring Your TV’s Settings ............................. 20
Operating Settings Menu Items ........................ 20
Using a Conditional Access Module ..................... 21
Viewing Conditional Access Menu (*) ............... 21
Confi guring Language Preferences ...................... 21
Language Settings ............................................ 22
Parental Control.................................................... 22
Parental Settings Menu Operation ................... 22
Timers ................................................................... 22
Setting Sleep Timer .......................................... 22
Setting Programme Timers ............................... 23
Confi guring Date/Time Settings ............................ 23
Confi guring Source Settings ................................. 23
Confi guring Other Settings ................................... 24
Operation .......................................................... 24
Other Features ..................................................... 25
Teletext ................................................................. 25
Digital Teletext (** for UK only) ......................... 25
Analogue Teletext ............................................. 25
Tips ....................................................................... 26
Appendix A: PC Input Typical Display Modes ....... 27
Appendix B: AV and HDMI Signal Compatibility
(Input Signal Types) .............................................. 27
Appendix C: Supported DVI Resolutions.............. 28
Appendix D: Supported File Formats for USB
Mode..................................................................... 28
Appendix E: Software Upgrade ............................ 29
Specifi cations ....................................................... 30
Important Instruction ............................................. 31
01_MB60_[GB]_[VESTEL_UK]_3902UK_IDTV_NICKEL16_woypbpr_32914W_10076108_50202180.indd 101_MB60_[GB]_[VESTEL_UK]_3902UK_IDTV_NICKEL16_woypbpr_32914W_10076108_50202180.indd 1 02.12.2011 17:37:0202.12.2011 17:37:02
English - 2 -
Package Contents
SCREEN
SCREEN
LANG
LANG
MENU
MENU
RETURN
RETURN
OK
OK
SOURCE
SOURCE FAV
PRESETS
PRESETS
SLEEP
SLEEP
?
INFO
INFO
EPG
EPG
V+
V+
V-P-P-
P+
P+
1
2
3
4
6
5
9
7 8
0
PIP
PIP
SUBTITLE
SUBTITLE
Remote Control
LCD TV
Batteries: 2 X AAA
Instruction Book
Note: You should check the accessories after purchasing. Make sure that each accessory is
included.
Features
Remote controlled colour LCD TV.
Fully integrated Terrestrial digital TV (DVB-T - • MPEG2, MPEG4)
HDMI connectors for digital video and audio. This • connection is also designed to accept high defi nition signals.
USB input.
1000 programmes (analogue+digital).
OSD menu system.
Integrated tuner MPEG 2, MPEG 4 compatible.
Scart socket for external devices (such as video, • video games, audio set, etc.).
Stereo sound system. (Nicam)
Teletext, fastext, TOP text.
Headphone connection.
Automatic programming system.
Forward or backward manual tuning.
Sleep timer / Child lock.
Automatic sound mute when no transmission.
NTSC playback.
AVL (Automatic Volume Limiting).
Auto power down.
PLL (Frequency Search).
PC input.
Plug&Play for Windows 98, ME, 2000, XP, Vista, • Windows 7.
Game Mode
Introduction
Thank you for choosing this product. This manual will guide you for the proper operation of your TV. Before operating the TV, please read this manual thoroughly. Please do keep this manual in a safe place for future references.
This device is intended to receive and display TV programs. The different connection options make an additional expansion of the reception and display sources possible (receiver, DVD player, DVD recorder, VCR, PC etc.).
This device is only suitable for dry, indoor use. This appliance is intended solely for private domestic use and may not be used for industrial and commercial purposes. We exclude liability in principle, if the device is not used as intended, or unauthorized modifi cations have been made. To operate your LCD TV in extreme ambient conditions may cause the damage of the device.
Preparation
For ventilation, leave a free space of at least 10 cm all around the set. To prevent any fault and unsafe situations, please do not place any objects on top of the set. Use this device in moderate climates.
10 cm
10 cm
10 cm
01_MB60_[GB]_[VESTEL_UK]_3902UK_IDTV_NICKEL16_woypbpr_32914W_10076108_50202180.indd 201_MB60_[GB]_[VESTEL_UK]_3902UK_IDTV_NICKEL16_woypbpr_32914W_10076108_50202180.indd 2 02.12.2011 17:37:0302.12.2011 17:37:03
English - 3 -
Safety Precautions
Read the following recommended safety precautions carefully for your safety.
Power Source
The TV set should be operated only from a 220-240V AC, 50 Hz outlet. Ensure that you select the correct voltage setting for your convenience.
Power Cord
Do not place the set, a piece of furniture, etc. on the power cord (mains lead) or pinch the cord. Handle the power cord by the plug. Do not unplug the appliance by pulling from the power cord and never touch the power cord with wet hands as this could cause a short circuit or electric shock. Never make a knot in the cord or tie it with other cords. The power cords should be placed in such a way that they are not likely to be stepped on. A damaged power cord can cause fi re or give you an electric shock. When it is damaged and needs to be replaced, it should be done by qualifi ed personnel.
Moisture and Water
Do not use this device in a humid and damp place (avoid the bathroom, the sink in the kitchen, and near the washing machine). Do not expose this device to rain or water, as this may be dangerous and do not place objects filled with liquids, such as fl ower vases, on top. Avoid from dripping or splashing.
If any solid object or liquid falls into the cabinet, unplug the TV and have it checked by qualifi ed personnel before operating it any further.
Cleaning
Before cleaning, unplug the TV set from the wall outlet. Do not use liquid or aerosol cleaners. Use soft and dry cloth.
Ventilation
The slots and openings on the TV set are intended for ventilation and to ensure reliable operation. To prevent overheating, these openings must not be blocked or covered in anyway.
Heat and Flames
The set should not be placed near to open fl ames and sources of intense heat such as an electric heater. Ensure that no open fl ame sources, such as lighted candles, are placed on top of the TV. Batteries should not be exposed to excessive heat such as sunshine, re or the like.
Lightning
In case of storm and lightning or when going on holiday, disconnect the power cord from the wall outlet.
Replacement Parts
When replacement parts are required, make sure that the service technician has used replacement parts which are specifi ed by the manufacturer or have the same specifi cations as the original one. Unauthorized substitutions may result in fi re, electrical shock or other hazards.
Servicing
Please refer all servicing to qualifi ed personnel. Do not remove the cover yourself as this may result in an electric shock.
Waste Disposal
Instructions for waste disposal:
• Packaging and packaging aids are recyclable and should principally be recycled. Packaging materials, such as a foil bag, must be kept away from children.
• Batteries, including those which are heavy metal­free, should not be disposed of with household waste. Please dispose of used batteries in an environmentally friendly manner. Find out about the legal regulations which apply in your area.
Do not try to recharge batteries, there is a danger
of explosion. Replace batteries only with the same or equivalent type.
Information for users in EU Countries
This symbol on the product or on its packaging means that your electrical and electronic device should be disposed at the end of its service life separately from your household wastes. There are separate collection systems for recycling in the EU. For more information, please contact the local authority or the dealer where you purchased the product.
Disconnecting the Device
The mains plug is used to disconnect the TV set from the mains and therefore it must remain readily operable.
Headphone Volume
Excessive sound pressure from earphones and headphones can cause hearing loss.
01_MB60_[GB]_[VESTEL_UK]_3902UK_IDTV_NICKEL16_woypbpr_32914W_10076108_50202180.indd 301_MB60_[GB]_[VESTEL_UK]_3902UK_IDTV_NICKEL16_woypbpr_32914W_10076108_50202180.indd 3 02.12.2011 17:37:0302.12.2011 17:37:03
English - 4 -
Installation
To prevent injury, this device must be securely attached to the wall in accordance with the installation instructions when mounted to the wall (if the option is available).
LCD Screen
The LCD panel is a very high technology product with about a million thin fi lm transistors, giving you fi ne picture details. Occasionally, a few non-active pixels may appear on the screen as a fi xed blue, green or red point. Please note that this does not affect the performance of your product.
Warning! Do not leave your TV in standby or operating mode when you leave your house.
Connection to a Television Distribution System (Cable TV etc.) from Tuner
Devices connected to the protective earthing of the building through the mains connection or through other apparatus with a connection to protective earthing-and to a television distribution system using coaxial cable, may in some circumstances create a re hazard.
Connection to a cable distribution system has therefore to be provided through a device providing electrical isolation below a certain frequency range (galvanic isolator, see EN 60728-11).
Licence Notifi cation (Optional)
Manufactured under license from Dolby Laboratories.
TRADEMARK ACKNOWLEDGMENT
“Dolby” and the double-D symbol are trademarks of Dolby Laboratories.
The Standby On/Off button does not completely switch off this device, it will still consume power. In order to fully switch off this device, the power should be switched off at the mains socket. Because of this the device should be set up in a way, that unobstructed access to the mains socket is guaranteed, so that in case of an emergency the mains plug can be pulled out immediately. To exclude the danger of fi re, the power cord should be removed from the mains socket prior to a long period of non-use, i.e. during vacations.
Electrical device not in the hands of children
Never let children use any electrical device unsupervised. Children cannot always recognize possible dangers. Batteries / accumulators can be life threatening when swallowed. Store batteries out of the reach of small children. In case of swallowing a battery medical aid has to be sought immediately. Also keep the packaging foils away from children, as there is danger of suffocation.
Note:The HDMI connection between PC and TV may cause radio interference in which case it is recommended to use VGA(DSUB-15) connection.
Remote Control Handset
Inserting Batteries
Remove the battery cover located on the back of • the handset by gently pulling backwards from the indicated part.
Insert two AAA/R3 or equivalent type batteries inside. Observe the correct polarity (+/-) when inserting batteries and replace the battery cover.
+
+
-
-
Note: Remove the batteries from the remote control handset when it is not to be used for a long period. Otherwise it can be damaged due to any leakage of batteries. Remote range is approximately 7m/23ft.
01_MB60_[GB]_[VESTEL_UK]_3902UK_IDTV_NICKEL16_woypbpr_32914W_10076108_50202180.indd 401_MB60_[GB]_[VESTEL_UK]_3902UK_IDTV_NICKEL16_woypbpr_32914W_10076108_50202180.indd 4 02.12.2011 17:37:0402.12.2011 17:37:04
English - 5 -
Environmental Information
This television is designed to consume less energy to save environment.
You not only help to save the environment but also you can save money by reducing electricity bills thanks to the energy effi ciency feauture of this TV. To reduce energy consumption, you should take the following steps:
You can use Power Save Mode setting, located in the Feature menu. If you set Power Save Mode as On, • the TV will switch to energy-saving mode and luminance level of TV set will be decreased to optimum level. Note that some picture settings will be unavailable to be changed when the TV is in Power Save Mode.
When the TV is not in use, please switch off or disconnect the TV from the mains plug. This will also reduce • energy consumption.
Disconnect power when going away for longer time.
Note that annually, using the TV set in Power Save Mode has more power effi ciency than disconnecting the TV from the mains plug instead of keeping stand-by mode. Therefore it is highly recommended to activate Power Save Mode setting to reduce your annual power consumption.And also it is recommended to disconnect the TV from the mains plug to save energy more when you do not use.
• Please helps us to save environment by following these steps.
Repair Information
Please refer all servicing to qualifi ed personnel. Only qualifi ed personnel must repair the TV. Please contact your local dealer, where you have purchased this TV for further information.
01_MB60_[GB]_[VESTEL_UK]_3902UK_IDTV_NICKEL16_woypbpr_32914W_10076108_50202180.indd 501_MB60_[GB]_[VESTEL_UK]_3902UK_IDTV_NICKEL16_woypbpr_32914W_10076108_50202180.indd 5 02.12.2011 17:37:0402.12.2011 17:37:04
English - 6 -
Remote Control Buttons
V
V
SCREEN
SCREEN
LANG
LANG
SUBTITLE
SUBTITLE
PIP
PIP
MENU
MENU
RETURN
RETURN
OK
OK
SOURCE
SOURCE FAV
PRESETS
PRESETS
SLEEP
SLEEP
?
INFO
INFO
EPG
EPG
V+
V+
V-P-P-
P+
P+
1
2
3
4
6
5
9
7 8
0
V
8
9
10
11
15
28
29
12 13 14
16
17
27
26
25
20
23 22
21
19 18
1
2
3 4
5 6
7
24
30
Standby1.
Mono/Stereo - Dual I-II / Currrent Language (*) 2. (in DVB channels)
Image size / Zooms videos (in Media Browser 3. video mode)
Green button/List Schedule(in EPG)/Tag/Untag 4. All(in favourite list)/Play-Slideshow(in Media Browser)
Red button/Stop(in Media Browser)5.
Numeric buttons6.
Teletext / Mix(in TXT mode) 7.
Cursor Left 8.
Menu on-off9.
AV / Source selection10.
Favourite Mode Selection(in DVB channels)11.
Volume Up12.
Info / Reveal (in TXT mode)13.
Mute14.
Volume Down15.
Programme Down / Page up(in DVB channels)16.
Electronic programme guide(in DVB channels)17.
Programme Up / Page down(in DVB channels)18.
Sleep Timer19.
Picture mode selecion. / Changes picture mode 20. (in Media Browser video mode)
Okay (Confi rm) / Hold (in TXT mode)/ Edit 21. Channel List
Cursor Down22.
Exit / Return / Index page (in TXT mode)23.
Cursor Right / Subpage (in TXT mode)24.
Cursor Up 25.
Previous programme26.
Yellow button/Pause (in Media Browser)/27. Timeline Schedule(in EPG)
Blue button/Edit Channel List/Filter (İn Favourite 28. List&EPG)/Loop-Shuffl e (in Media Browser)
No function29.
Subtitle on-off (in DVB channels)30.
01_MB60_[GB]_[VESTEL_UK]_3902UK_IDTV_NICKEL16_woypbpr_32914W_10076108_50202180.indd 601_MB60_[GB]_[VESTEL_UK]_3902UK_IDTV_NICKEL16_woypbpr_32914W_10076108_50202180.indd 6 02.12.2011 17:37:0402.12.2011 17:37:04
English - 7 -
LCD TV and Operating Buttons
FRONT and REAR VIEW Control buttons VIEW Control Buttons
Standby button1.
TV/AV button2.
Programme Up/Down 3. buttons
Volume Up/Down buttons4.
Note: Press
” / “
buttons at the same time to view main menu.
Viewing the Connections - Back Connectors
HDMI 1
DMHI 2
SPDIF
Coax.OUT
HDMI 2: HDMI Input1.
HDMI 1: HDMI Input2. HDMI Inputs are for connecting a device that has an HDMI socket. Your LCD TV is capable of
displaying High Defi nition pictures from devices such as a High Defi nition Satellite Receiver or DVD Player. These devices must be connected via the HDMI sockets or Component Socket. These sockets can accept either 720p or 1080p signals. No sound connection is needed for an HDMI to HDMI connection.
RF Input3. connects to an aerial antenna system. Note that if you use a decoder or a media recorder, you should connect the aerial cable through the device to the television with an appropriate antenna cable, as shown in the illustration in the following pages.
SCART 4. input or output for external devices. Connect the SCART cable between SCART socket on TV and SCART socket on your external device (such as a decoder, a VCR or a DVD player).
Note: If an external device is connected via the SCART socket, the TV will automatically switch to AV mode. Note: S-VHS signal is supported via the scart socket.
Note: When receiving DTV channels (Mpeg4 H.264) or while in Media Browser mode, output will not be
available via the scart socket.
01_MB60_[GB]_[VESTEL_UK]_3902UK_IDTV_NICKEL16_woypbpr_32914W_10076108_50202180.indd 701_MB60_[GB]_[VESTEL_UK]_3902UK_IDTV_NICKEL16_woypbpr_32914W_10076108_50202180.indd 7 02.12.2011 17:37:0402.12.2011 17:37:04
English - 8 -
PC Input5. is for connecting a personal computer to the TV set. Connect the PC cable between the PC INPUT on the TV and the PC output on your PC.
Note: You can use YPbPr to VGA cable (not supplied) to enable YPbPr signal via PC input. WARNING: You cannot use PC and YPbPr at the same time.
S/PDIF Coaxial Out6. outputs digital audio signals of the currently watched source. Use an SPDIF coaxial cable to transfer audio signals to a device that has S/PDIF input
Viewing the Connections - Side Connectors
CI Slot is used for inserting a CI card. A CI card allows you to view all the 1. channels that you subscribe to. For more information, see “Conditional Access” section.
USB input.2.
Video Input is used for connecting video signals of external devices.Connect 3. the video cable between the VIDEO IN socket on the TV and the VIDEO OUT jack on your device.
Audio Inputs are used for connecting audio signals of external devices. Connect 4. the audio cable between the AUDIO INPUTS on the TV and the AUDIO OUTPUT jacks on your device.
Note: If you connect a device to the TV via the VIDEO INPUT, you should also connect your device with an audio cable to the AUDIO INPUTS of the TV to enable audio.
Headphone jack is used for connecting an external headphone to the 5. system. Connect to the HEADPHONE jack to listen to the TV from headphones (optional).
Aerial Connection
Connect the aerial or cable TV plug to the AERIAL INPUT socket located at the rear of the TV.
HDMI 1
DMHI 2
SPDIF
Coax.OUT
Power Connection
IMPORTANT: The TV set is designed to operate on 220-240V AC, 50 Hz.
After unpacking, allow the TV set to reach the ambient room temperature before you connect the set to the • mains. Plug the power cable to the mains socket outlet.
5Vdc-Max500mA
01_MB60_[GB]_[VESTEL_UK]_3902UK_IDTV_NICKEL16_woypbpr_32914W_10076108_50202180.indd 801_MB60_[GB]_[VESTEL_UK]_3902UK_IDTV_NICKEL16_woypbpr_32914W_10076108_50202180.indd 8 02.12.2011 17:37:0502.12.2011 17:37:05
English - 9 -
Switching On/Off
To Switch the TV On
Connect the power cord to the 220-240V AC 50 Hz. • Then the standby LED lights up. (The led will blink during the standby On/Off)
To switch on the TV from standby mode either:
Press the “
” button, P+ / P- or a numeric button
on the remote control.
Press the “
” button, - or + button on the TV. The
TV will then switch on.
• When the mains power is fi rst connected to the device the light on the front of the unit will start fl ashing for few seconds, when it stops fl ashing (remains constant) the TV will be in standby mode.
Note: If you switch on your TV via PROGRAMME UP/DOWN buttons on the remote control or on the TV set, the programme that you were watching last will be reselected.
By either method the TV will switch on.
Note: When the device is coming out of standby the light on the front of the unit will fl ash until the picture appears. If you activate the power operation again (before the light has had time to stop fl ashing) the device will turn off into stndaby mode again. This is normal operation and not a fault
Note: The standby light will blink while the TV is powering up from Standby mode.
To Switch the TV Off
Press the “ ” button on the remote control or press the “ ” switch on the TV, the TV will switch
to standby mode.
To power down the TV completely, unplug the power cord from the mains socket.
Note: When the TV is switched to standby mode, standby LED can blink to indicate that features such as Standby Search, Over Air Download or Timer is active.
First Time Installation
IMPORTANT: Ensure that the aerial is connected before switching on the TV for the first time installation.
When the TV is operated for the fi rst time, the installation wizard will guide you through the process. First, language selection screen will be displayed:
Use “ ” or “ ” buttons to select your language and press OK button to set the selected language and continue.
After selecting the language, “ Welcome!” screen will be displayed, requiring you to set Country, Teletext Language and Scan Encrypted options.
By pressing “ ” or “ ” button, select the country you want to set and press “ ” button to highlight Teletext Language option. Use “ ” or “ ” button to select desired Teletext Language.
Press “
” button after setting Teletext Language option. Scan Encrypted will be then highlighted. You can set Scan Encrypted as Yes if you want to scan coded stations.Afterwards select the desired Teletext Language.
Press OK button on the remote control to continue and the following message will be displayed on the screen:
01_MB60_[GB]_[VESTEL_UK]_3902UK_IDTV_NICKEL16_woypbpr_32914W_10076108_50202180.indd 901_MB60_[GB]_[VESTEL_UK]_3902UK_IDTV_NICKEL16_woypbpr_32914W_10076108_50202180.indd 9 02.12.2011 17:37:0802.12.2011 17:37:08
Loading...
+ 23 hidden pages