digicon catrax fit Product Manual

Product manual

Copyright– Digicon S.A.

Electronic Control for Mechanics – 2014

All rights reserved. No part of this publication may be reproduced, transmitted,
transcribed, stored in a retrieval system, translated into any language or computer
language in any electronic, magnetic, optical, chemical, manual way, or otherwise,
without the express written permission from Digicon S.A.

Manual code: 069.31.201

English - Revision: 02

This manual was elaborated by: Digicon S.A. Electronic Control for Mechanics

Documentation Sector - EDS

Contents

1. Important instructions .........................................................................05

2. Orientations .......................................................................................06

3. Introduction .......................................................................................06

4. Features of atrax FitC ...........................................................................07

4.1 atrax Fit OperationC ...........................................................................08

5. Installation/Assembling Catrax Fit .........................................................09

5.1 Unboxing .........................................................................................09

5.2 Floor drilling .....................................................................................10

5.3 Colum fixation ..................................................................................10

5.4 Assembling the arms .........................................................................11

5.5 Access to Catrax Fit after assembling ....................................................12

5.5.1 Cover ...........................................................................................12

6. Optional items ...................................................................................13

6.1 Pictogram kit ...................................................................................13

6.2 Electric counter kit ............................................................................14

6.3 Power supply ...................................................................................16

6.4 Control board ...................................................................................17

6.4.1 Inputs ..........................................................................................20

6.4.1.1 Connection scheme .....................................................................21

6.4.1.2 Pictogram ..................................................................................21

6.4.1.3 Pictogram's connections ...............................................................21

6.4.2 Configuration of control board – Switch Ds1 .........................................22

6.4.3 Outputs ........................................................................................22

6.4.3.1 Return signals .............................................................................23

6.4.3.2 Electromagnets ...........................................................................23

6.4.3.3 Sound alarm...............................................................................23

6.4.4 Examples of some configurations ......................................................24

6.5 Anti-Panic System .............................................................................25

7. Maintenance ......................................................................................26

7.1 Preventive and corrective routine maintenance .......................................26

7.2 Defects and possible causes ................................................................28

8. Technical characteristics ......................................................................29

8.1 Dimensions ......................................................................................29

8.2 Other information ..............................................................................30

9. Warranty and Technical Assistance .........................................................31

05

1. mportant nstructionsI i

You can see, below, the symbols that will appear in this manual,
signaling important moments. It is essential to pay attention to them.

TIP: Indicates something Digicon considers important.

CAUTION: Indicates a moment of extreme caution when

handling the equipment/product

ATTENTION: Indicates a moment when your observation
skills should be extremely productive.

INFORMATION: Presents interesting facts about the
purchased product.

QR CODE: Presents additional information or links
with more details about the presented text

.

2. Orientations

 Read the information and instructions of this manual carefully, before using the

product. This ensures the correct use of the equipment and maximum use of its
technical features as well as a prolonged service life.

 This product does not present sealing against the rain, that is, it is designed to be

used indoors.

 Keep this manual for future consultations.
 Digicon reserves its right to alter its products at any moment to adapt them to more

recent technical advancements.

 Digicon maintains its right to alter the information contained in this manual without

previous

notice.

 Digicon does not provide any contractual warranty concerning the information in this

manual, and cannot be held responsible for errors it may contain and problems due
to its use.

 The information contained in this manual is exclusive property of Digicon and is

protected by copyright laws.

 This manual cannot be reproduced, photocopied or translated, in its entirety or in

part, into any kind of medium, without Digicon's written consent.

3. Introduction

Following a new technological concept focused on solidity and reliability and counting
with innovative design elements, with color variety and widely curved lines, Digicon has
launched the line C Fit.atrax

C Fit serves most technologies of access control currently available at companies,atrax
condominiums, clubs, and gyms. This manual presents a detailed description of the
components and working of C Fit.atrax
To see our complete catalogue, visit www.digicon.com.br

4. atraxFeatures of C Fit

C Fit, an access controller in the model mini turnstile (column type), presents threeatrax
bidirectional, equidistant arms at 120 degrees with brushed stainless steel (AISI 304)
finishing.

The column can present external 1020 carbon steel finishing with electrostatic painting
in black or grey epoxy powder.

It has reinforced structure, fully rounded corners, and non-exposed screws, offering
space and comfort for any access control solution.
Standard holes for the fixation of additional electronic boards. Moreover, the clients,
according to their needs, can add additional holes. Access to the support is done through
a key with secret, whose removal and insertion are extremely easy.
A plastic cover and a stainless steel sheet compose the upper panel. The cover, made of
injected plastic, can be purchased in the colors green, burgundy, or black or in any other
color desired, on demand. Optionally, the cover can present a slot for the reading of
magnetic cards/badges and barcodes.
The upper cover in stainless steel allows easy configuration and low-cost customization
of the product. The sheet can also present slots for optional items, such as pictogram,
display kit, or a combination of these items.
Besides compatibility with most available technologies, Digicon can provide the
following optional items: pictogram kit, counter kit, power supply, and control board.

INFORMATION: The turning of the turnstile can be blocked only with the
activation of the electromagnets. If the turnstile has no power supply, the
turning mechanism remains free.

4.1 C Fit Operationatrax

In the basic mechanism, C Fit has a two-dimensional rotation system with twoatrax
12 V electromagnets for activating the locks and two optical sensors that can provide
the signal for the activation of the electromagnets and passage clearance.
In the electronic model, which includes a microprocessor control board (optional), a
signal enabling passage is sent through one of the inputs, depending on the passage
direction. If this signal is recognized, the equipment will allow the turning of the arm
of C Fit. After half of the turning is complete (60 degrees), a 400 millisecondsatrax
returning signal will be sent, informing the passage direction. After the signal, the
arm cannot be returned to the previous position.
Depending on the C Fit model and configuration, if the passage is forced withoutatrax
the enabling signal, an electromagnet will be activated to prevent turn. In addition,
the equipment can emit a signal for a sound alarm and/or the exhibition of a red X on
the upper panel display (models with pictogram). In this case, a return signal will be
sent, indicating that the turnstile was forced, informing the direction of turn.

-Mechanisms of C Fit:atrax

5. Installing/Assembling C Fitatrax

5.1 Unboxing

As the items inside the package can vary (depending on the client's requests), it is
important to perform a cautious visual inspection before installing and assembling the
turnstile. A checklist that works as a guide during inspection accompanies all Digicon
packages.

See below the parts that can compose C Fit:atrax

ATTENTION: To avoid losses, the screws and the wrenches used for
assembling the C Fit are attached to the box containing the arms.atrax
Before discarding the packing materials (cardboard and plastics), make
sure all the items in the checklist are accounted for.

Left to right direction

Right to left direction

Arm

Lock

Cables
passage

Steel sheet

Plastic
co

ver kit

Column

5.2 Floor drilling

Before installing C Fit, check:atrax

-If there will be enough space.

-The place chosen for the installation.

-If there is a power source or electric socket nearby (ducts for connection);

-if the place chosen is adequate for the installation of the access controller (indoors);

-if there will be enough space (minimum 5 cm) between the rear of the C Fitatrax
column and the wall. This space is important in order to provide access to the upper
panel and plug's locks for the cables passage.

-if there will be enough space for the arms after C Fit is assembled.atrax

-If the floor is in conditions to receive anchor bolts (minimum of 4 cm of FCK15 M.P.A.
concrete or equivalent).

5.3 Colum fixation

To fixate the column to the floor, observe the following steps:

1. drill the floor with 3/8” drills (then use a 12mm or the ½” drill). Make 4 external
holes, according to the measures indicated in the image below:

ATTENTION: Since the C Fit's installation requires floor drilling, itatrax
is important that the location be chosen carefully.

Measures in millimeters and inches.

120 (4,724")

54

(2,125")

51 (2,007")

230 (9,055")

ATTENTION: in the central slot, destined to the passage of cables, it is
necessary to measure the cables according to the opening's size.

TIP: As an optional item, Digicon can provide a steel template for the
fixation of Catrax Fit, containing the exact demarcations of the necessary
holes.

2. Clean the holes, removing any debris from drilling.

3. Place the external part of the bolts in the holes. Leave about 25mm of the bolt out
of the hole.

4. Position the column and fasten it to the floor with the four screws that accompany
the bolts. Use a flex-head socket wrench with ¾'' or an articulated socket wrench.

5.4 Assembling the arms

After drilling the floor and assembling the column, it is possible to assemble the arms
and

plastic covers.
The image below shows the specific parts of C Fit's arms and upper frontalatrax
cover.

TIP: We recommend the bolts by the brand Tecnart, model AF38110,
3/8x4''.

Screw M3x8

Screw M3x16

Upper plastic

cover

Flat washer M3

Arm

*Screws’ access cover
*Screw Allen M6x20
*Lock washer M6