Digianswer A S BTPCM101 Users Guide
SOFTWARE SUITE
PC CARD •• INSTALLATION GUIDE
Contents:
•• About this guide, 2
•• System requirements, 2
•• Inserting PC card, 2
•• Installing drivers, 3
•• Installing application software, 3
•• Uninstalling application software, 4
•• Operation, 5
•• Regulatory statements, 5
About this guide
This Installation Guide will show you
how to install the Bluetooth™
Software Suite version 1.0. The
instructions will cover:
• Inserting the PC card and
installing the drivers, i.e. software
programs needed for the PC card
to work.
• Installing the application software.
Furthermore, users who have a
previous version of the Bluetooth
Software Suite will find information on
how to uninstall the old version before
installing the new one.
In addition to this printed Installation
Guide, the Bluetooth Software Suite is
accompanied by the following
documents: A Beginner’s Guide
providing a general introduction to the
Bluetooth technology, and a User’s
Manual covering all aspects of
operating the Bluetooth Software
Suite. You will find the Beginner’s
Guide and the User’s Manual on the
Bluetooth Software Suite CD-ROM.
Disclaimer
Any responsibility or liability for loss or
damage in connection with the use of
this product and the accompanying
documentation is disclaimed. The
information in this document is
furnished for informational use only, is
subject to change without notice, may
contain errors or inaccuracies, and
represents no commitment
whatsoever. This agreement is
governed by the laws of Denmark.
Document issue: Draft 00-04-19
System
Requirements
The Bluetooth Software Suite can be
installed on computers running one of
the following operating systems:
• Microsoft Windows 95 or later
• Microsoft Windows NT
Workstation version 4.0 or later
Inserting PC card
When you want to install the
Bluetooth Software Suite on your
computer, the first thing to do is insert
the PC card in the PCMCIA slot of the
computer.
1. Turn on your computer.
2. Make sure all programs are
closed.
3. Insert the PC card in the
PCMCIA slot (placed on one of
the sides of the laptop computer):
2
Installing drivers
The first time you insert the PC card,
Windows will tell you that it needs to
find drivers for the new hardware. A
driver is a software program needed
for a piece of hardware to work.
1. Insert the Bluetooth Software
Suite CD-ROM.
2. Follow the onscreen prompts to
complete the installation of
drivers.
Please note:
• When Windows asks you to
specify the location of the drivers,
type D:\Drivers (substitute the
appropriate letter of your CDROM drive for D).
•• Windows may tell you that after
having installed the drivers, you
should restart your computer.
However, it is not necessary to
restart the computer before
installing the application software.
•• Do not remove the Bluetooth
Software Suite CD-ROM from the
computer until you have installed
the application software.
Installing
application
software
Note: If a previous version of the
Bluetooth Software Suite is installed
on your computer, this must be
uninstalled before the installation of
the new application software can take
place. See the section Uninstalling
application software.
Having inserted the PC card and
installed the drivers, you are now
ready to install the software for the
Bluetooth Software Suite applications.
To do so, follow the instructions in this
section. (If Autorun is enabled on your
computer, in some cases steps 1-3
may be skipped.)
1. Click Start.
2. Click Run.
3. Type D:\Setup.exe (substitute the
appropriate letter of your CDROM drive for D).
4. Follow the onscreen prompts to
complete the installation of the
application software.
Please note:
• Before the program can be
installed, you will be asked to
accept the terms of the license
agreement. If you cannot accept
the terms, click No, in which case
the Bluetooth Software Suite will
not be installed on your
computer. To accept the tems of
the agreement, click Yes.
3
Loading...