Digi X1, X2 User Manual
1 Verify kit contents
Sh
if
t
Shift
UART Application Kit Board
Flat ribbon 50-pin cable
Quick Start Guide
U
ART Application Kit
This Quick Start Guide
2 Connect hardware
to development board
Connect your Development board to the UART
Application Kit board via the provided flat ribbon 50-pin
cable. Connect one end of the cable to the Peripheral
Application Header in your Development board,
other end in header X1 or X2 of the UART Application Kit
(see table)
Development
Board
and the
T
UAR
Application Kit
Board
X1 X2
Quick Start Guide
UART Application Kit
Development Peripheral UART
Board Application Header AppKit board
ConnectCore 9P 9360 X33 X1
ConnectCore 9P 9215
ConnectCore 9M 2443 X33 X1
ConnectCore 9C/Wi-9C P16 X1
X33
X2
3 Download
4 What’s next?
documentation
To obtain a materials lists and installation
a
instructions specific to your platform, go to
http://www
From the “Select a Product” drop down box,
b
select “Application Kits”
© 2008 Digi International, Inc.
Digi, Digi International, Inc., and the Digi logo are trademarks or registered trademarks of Digi International, Inc., in the United States and other countries worldwide. All other trademarks are property of their
respective owners.
.digi.com/support
Open User Manual for installation and use
instructions for the UART Application Kit drivers
and softw
are
Loading...