Digi WR64-A121, TransPort WR64 Quick Start Manual

Page 1

Welcome to the Internet of getting things done

Digi provides M2M connectivity for industries where things don't come easily. Where operations are spread over vast areas or involve complex, even hazardous, processes. No matter where your M2M products and systems go to work, Digi helps ensure that they are relentlessly reliable and secure. Every device. Every connection. Everywhere.

CONNECTWITHCONFIDENCE.

Digi TransPort WR64 product benefits

• Wired Gigabit Ethernet (4-port) for onboard

systems

• Segmented private versus public data

communication across dual 600 Mbps CAT 11 cellular

• Video and vehicle data offload over 1.7 Gbps

802.11ac Wi-Fi backhaul

• Passenger Wi-Fi over 867 Mbps 802.11ac

access point

For hardware safety information, go to Digi

TransPort WR64 Hardware Reference. For

product information, go to www.digi.com/wr64 or scan the following QR code.

Digi TransPort® WR64 | Quick Start Guide

1 Connect

SIM cards (not included)

Internet

Power cord

Page 2

MANAGEDEVICESREMOTELY

Digi Remote Manager

Digi Remote Manager provides an efficient, cost-effective way to remotely monitor and manage your devices. Perform remote configuration and troubleshooting of your Digi TransPort intelligent routers over 3G/4G LTE, while meeting your security requirements and enjoying greater reliability.

Digiservices and support

Purchase with confidence knowing that Digi is always available to serve you with expert technical support. Visit Digi at www.digi.com/

support.

Simplified EU Declaration of Conformity

We, Digi International Inc. of 11001 Bren Road East, Minnetonka, MN 55343, USA declare that this radio equipment is in compliance with EU Directive 2014/53/EU (RE) and EU Directive 2011/65/EU (RoHS2). The full text of the EU Declaration of Conformity is available at the following Internet address: www.digi.com/

resources/certifications.

Digi TransPort® WR64 | Quick Start Guide

2 Configure

a. Power on the TransPort WR64.

Indicator LEDs blink to show status during startup.

b. Wait for the power LED to stop blinking.

c. View the printed label on the bottom of your device and note the

default user name and unique password for your device. You will need the password when you log in for the first time.

d. Open a browser and go to 192.168.1.1.

Both HTTP and HTTPS are supported.

e. Click Start Device Setup to run the Getting Started Wizard.

f. Log in to the device using the default user name admin and the

unique password for your device.