Digi WI-9M 2443 User Manual
Shift
1
Verify Kit Contents
Verify that your kit contains one of each of these components:
S2
X24
S7
X27
S6
X16
S3
802.11 a/b/g
Antenna
S4
X18
S5
Development Board
J1
X7
X33
802.11 b/g
Antenna
X5
X29
Quick Start Guide
Digi JumpStart Kit
Windows Embedded CE 6.0
ConnectCore Wi-9M 2443
®
™
Quick Start Guide
®
Quick Start Guide
(this guide)
Digi JumpStart Kit
Windows Embedded CE 6.0
X6
ConnectCore Wi-9M 2443
X23
Digi JumpStart CD
2
Install Software
Certication Card
™
90033928_C
Ethernet Cable
Power Supply
3
Connect Serial Port A
a
Connect Ethernet
b
and/or antennas
Serial Null Modem Cable
Microsoft
Insert the Digi JumpStart CD. If autorun is enabled, the “Welcome”
Alternative Power Supply Plugs
Windows Embedded
CE 6.0 180-Day
Evaluation Kit
a
web page will appear. If not, open the le “welcome.html” on the
Digi JumpStart CD. Follow the instructions on the “Welcome” page
to install Digi Embedded Windows CE software.
Connect Hardware to Development Board
Connect to VGA Monitor
c
VGA Port [X18]
Connect to PC
Serial COM Port
Power Connector [X24]
d
a
Serial Port A [X27]
X24
S2
ON
X18
S4
S7
X27
J1
X7
X5
X29
802.11 a/b/g
antenna
b
Secondary [X29]
b
Ethernet Port [X7]
802.11 b/g
antenna
or
Connect to Network
Connect VGA cable from
c
VGA monitor (not included
in kit) to VGA port
d
a
Add the appropriate plug
and connect the power supply.
Do not switch power on.
What’s Next?
4
Software instructions are on the Welcome page of the CD-ROM.
When the software installation is complete, follow the instructions in
Building Your First Application. This guide introduces you to quickly
creating and running an application in the target platform. Building
Your First Application is accessible from the Start menu group.
X16
S3
S6
S5
Development Board
b
802.11 b/g
antenna
X6
802.11 a/b/g
antenna
b
or
X33
After going through Building Your First Application, you are
encouraged to read the ‘Digi JumpStart for Windows Embedded
CE 6.0 User’s Guide,’ accessible from the Visual Studio menu
Help > Help Contents, which explains in detail all the elements of the
development process such as kernel conguration, debugging, le
transfer, rmware update, etc.
X23
Primary [X23]
© Digi International, Inc., 2011
Digi, Digi International, ConnectCore, Digi JumpStart Kit, and the Digi logo are trademarks or registered trademarks of Digi International, Inc., in the United States and other countries worldwide. All other trademarks are the property of their respective owners.
Loading...