Digi Project Blueone User Manual

Owner’s Manual

- Use and maintenance ­for

PORTABLE POOL LIFT

Copyright: DIGI PROJECT
Publication: October 2005
Revised January 2011
Address of manufacturer:
DiGi Project
Via Roma, 8
46023 GONZAGA
MANTOVA
ITALY

Web:www.digiproject.biz
E-mail [e-mail]

UK Distributor

DIGI PROJECT

Dolphin Mobility Ltd
37 ChertseyRoad
Chobham
Surrey
GU24 8PD
Web: www.dolphinlifts.co.uk
Email [e-mail]

Any copy or alteration of this manual is not allowed.

Date of purchase:

1

DIGI PROJECT

The manual is divided into seven sections, each with their own symbol.
Part A (General information)
Important General information to become familiar with the BluOne portable
pool lift. Details of the unit item and Serial Number together with important
information for the operator. ..

Part B (Technical specifications )
Technical specifications–standard fitting.

Part C (Safety information and devices)
Information relating to the safety of the unit and the operator.

Part D (Operator)
Operator instructions.

Part E (Controls and devices)
Unit controls and devices.

Part F (Use)
All the information related to the unit use.

Part G (Maintenance)
All the information related to the unit regular maintenance

Part H (Service coupons)
The coupons for the service and maintenance operations.

2

DIGI PROJECT

Table of contents

1 Addresses
2 Part index
3 Topics index

PART A GENERAL INFORMATION

A.01
A.03
A.03
A.05

General information
Unit plate
Other plates
User information

PART B PERFORMANCES AND SPECIFICATIONS

B.02
B.03
B.03
B.04

C.02
C.02
C.03

Allowed use
Technical features
Overall dimensions
Unit diagrams

PART C SAFETY INFORMATION AND DEVICES
General safety infomation
Safety devices
Emergency

D.02
D.02

E.02
E.02

F.02
F.03
F.04

PART D OPERATOR
Qualification
Use and responsibility

PART E CONTROLS AND DEVICES
Controls panel
Lift controls

PART F USE INSTRUCTIONS
Introduction
Unit transfer
User transfer

3

DIGI PROJECT

G.02
G.02
G.03

H.02

PART G MAINTENANCE
Introduction
Check list
Disposal

PART H SERVICE COUPONS
Service coupons

4

DIGI PROJECT A.01

PART A

(GENERAL INFORMATION)

DIGI PROJECT A.02

Part A
(General Information)

The purpose of the following symbols is to underline suggestions or instructions.

INSTRUCTION
Instructions for safe use and operating procedures

ATTENTION
Incorrect use may result in damage to the unit.

DANGER
Incorrect use may result in danger to the operator, user or other persons in
the vicinity of the unit.

No less than two people are needed for this kind of operation.

DIGI PROJECT A.03

–

Unit plate

The unit plate is on the left side and you can find the following information:

1 Item
2 Serial Number

3 Max weight capacity

Item

Serial No.

Max weight

via Roma,8
ITALY+393341200663 ­[phone]

46023 GONZAGA (MN) -

Attached plates

Instructions information

black information on a yellow

.

plate

–

You can find the main safety
instructions for the unit use.

Uses not allowed –black

DIGI PROJECT A.04

information on a yellow plate

.
Important instructions of
Circumstances where unit
should not be used

Compulsory use –black information on a yellow plate.

Very important instructions for correct unit use.

DIGI PROJECT A.05

User Information

From now on the company DiGi Project is indicated as “The Manufacturer” of the unit.
This owner’s manual is in accordance with the Device Directive 89/392 and subsequent
amendments.
The use indications of this manual are those indicated by The Manufacturer.

ATTENTION:
The user must be informed of the following responsibility issues:

The Manufacturer

is responsible for the unit in the way it is made in its premises and for the use indicated in
Part B.

DIGI PROJECT A.06

INSTRUCTION:

Check the following indication before the unit first use:

• The unit plate with CE seal –it is attached by the Manufacturer.

ATTENTION:
Technical specifications, capacity, weight plates and other information are

referred to maximum unit performance in the way it is made in the Manufacturer premises.

Any welding, damaging of electric or mechanical devices, replacing of non-genuine spare
parts and removing of protection devices is forbidden.

Maintenance has to follow the indications and the timing of Part G.