Page 1
Digi One IA Modem
Quick Start Guide
Follow Wizard
From the Start button, choose
Settings > Control Panel.
In the Control Panel,
double-click Add/Remove Hardware.
Use Microsoft Windows
Wizard to install new
modem. Let the Wizard
discover the modem
hardware.
Insert Disk
Insert CD to install the config file (.inf)
for the modem.
Congratulations,
your Digi One IA Modem is installed.
For FAQs and brief AT reference guide, see other side. For
complete AT Command guide, use the CD.
For Digi Technical Support
You must register your product to validate your warranty and
receive your free 90 days of technical support! Please register
online at http://register.digi.com
If you encounter problems installing this product, your first line
of support is to contact your solution provider for technical
assistance. See other side for top 4 FAQs.
For self help, visit the Digi support site at
http://support.digi.com for drivers, firmware upgrades, cable
information, documentation, additional FAQs, and knowledge
base articles.
c Digi International Inc. 2002. All Rights Reserved. The Digi Connectware logo is a trademark of Digi International Inc. All
other brand and product names are the trademarks of their respective holders.
What's in the Box
Install Hardware
Hardware Setup
Digi One IA Modem
Resource CD
DB-9M to DB-9F
Straight-through
Cable
Complete Installation
Click finish to complete
installation.
Digi One IA Modem
Power Supply
Serial Cable
Phone Line
PN:(1P) A90000269
TM
Loading...