Digi MIL-S3170, MIL-S3160 User Manual

InstallationGuide

MIL-S3160

16-port 10/100

Dual Speed Switch

MIL-S3170

24-port 10/100

Dual Speed Switch

NTRODUCTION

I

Thanks for purchasing one of the MIL-S3100 family of dual speed switches. They provide dedicated bandwidths of
10/100 Mbps throughput per port to the desktop. With features such as auto-negotiation and half/full-duplex, these
switches offer smooth network migrations and eas y upgrades to network capacity.

! IEEE802.3X flow control in full-duplex operation

The MIL-S3100 family of 16 or 24 port 10/100 dual
speed switches has the following features:
! Complies with IEEE802.3, IEEE802.3U, and

IEEE802.3X standards

! 16 or 24 10/100 Mbps auto-negotiation switch ports
! Back pressure (collision based) flow control in half-

duplex operation

MS61624V01ADS

! One uplink push button is provided for cascading
! Auto-negotiation supported for each port
! Visual diagnostic LED’s supported
! 13-inch rack-mount width
! Standard IU chassis height
! Internal switching power supply

ACKAGE CONTENTS

P

Before you begin, verify that your package cont ains the
following items:

! 16 or 24-port 10/100 dual speed switch
! Self-adhesive rubber pads for desktop installation

24-Port 10/100 Dual Speed Switch

! AC Power cord
! Rack Mounting kit for rack installation
! Installation guide

Inner box

OW TO USE THE 16 OR 24-PORT 10/100 DUAL SPEED SWITCH

H

LED Display

Installation G uide

16-port 10/100M Switch

INTRODUCTION

Thanks f or yo ur pur cha se of the 16 -port Fast

One up-link connector provided for
cascadi ng

Ethernet Swit ches, pro vide d edicated

Auto-negotiation enable or force to full

100Mbp s throu ghput per po rt to the desktop.

duplex dip switche s supp orted for e ach

With features like auto-negotiation and full

port.

duplex, these sys tems offer smooth network

2Mbyt e SS RAM memo ry size

migrations an d easy upgrad es to net work

Up to 32K MAC address entries

capacity.

suppor ted
Visual diagnost ic LEDs s up port ed

1. 13-inch rack-mount wid th

The 16-po rt 10/100M Switch has th e
following features :

2. Standar d 1U ch assis hi gh t

Complies with IEEE802.3, I EEE8 0 2.3 u,

internal switchin g powe r supp ly
and IEEE802.3x standards
16 10/ 100Mbp s aut o-neg otiation swit ch
ports
Back pressure (Collision based) flow
control i n half du pl e x operat ion
IEEE 80 2.3x flow cont r o l i n f ull dupl ex

Installation G uide

Uplink push butto n

Normal/Uplink

Normal/Uplink

LED’s

The LED’s on the front panel provide visual presentation
to show the following status:

! Status of the switch’s power supply
! Connection speed of 10 Mbps or 100 Mbps
! Data activity on the segment
! Full or half-duplex operation mode

Power

Green The power is on.
Off Power is off.

Full/Col

Off There is no link or half-duplex

operation mode established and no
collision occurs.

Yellow Operation mode is full-duplex.

1

99

9

9

100-240VAC

12

Normal/Uplink

Normal/Uplink

Flashing Yellow The port is i n half-dup lex mod e and

collisions occur.

Link Activity

Off A link is not established on the port.
Green A 10 Mbps link is successfully

established on the port.

Flashing Green A 10 Mbps link is established and

data transmission or receive activity
occurs on the port.

Yellow A 100 Mbps link is established on

the port.

Flashing Yellow A 100 Mbps link is established and

data is transmitted or received.

2