Page 1
DICKSON
SC3
Temperature Chart Recorder Operation
Contents:
Product Applications and Useful Features
Product Specications
Charts & Accessories
Calibrations
Operating Instructions / Getting Started
Troubleshooting
Warranty / Factory Service & Returns
DICKSON
Useful Features
Applications &
Product
Specications
Product
Accessories
Charts &
Calibrations Operating
Rev. 06/03
Getting Started
Instructions /
Troubleshooting Warranty/
Factory Service
& Returns
Page 2
Rev. 06/03
Product Applications
The SC3 sets a new standard for compact recorders while providing the accuracy and resolution required
for regulatory compliance and quality control. The reusable SC3 is rugged enough to withstand the rigors of
transportation and storage applications. Best of all, its unbeatable low price makes temperature recording
affordable for virtually any application.
Useful Features
DICKSON
Useful Features
Applications &
Product
• Rugged case ideal for transportation and storage applications
• F/C Switchable, 24 hour/7 day Switchable
• Easy user calibration
• Security slots for recorder security
• Special ranges for refrigerators, freezers, incubators and ambient conditions
• Optional tamper seals can be used to insure the integrity of the chart
• Compact (less than 4” tall /wide) and durable
• Operates for up to 2 years on a single “AA” battery
• Direct sensing, no remote probe, compact enough to be placed almost any where
Specications
Product
Accessories
Charts &
Calibrations Operating
Getting Started
Instructions /
Troubleshooting Warranty/
Rev. 06/03
Factory Service
& Returns
Page 3
Product Specications
DICKSON
Useful Features
Applications &
Product
Temperature Sensor: Precise spiral wound bi-metallic strip transducer
Recorder Accurac y: ±4˚F (±2.5˚C) over full scale
Ambient Operating Temperature: -22 to +122˚F (-30 to +50˚C)
Response Time: 11 minutes to move 63% of full scale in air moving 5’ per second
Temperature Ranges: (˚F or ˚C depending on chart installed) -14 to +32˚F (-25 to 0˚C),
+4 to +50˚F (-15 to +10˚C), +22 to +68˚F (-5 to +20˚C),
+50 to +96˚F (+10 to +35˚C), +76 to +122˚F (+25 to +50˚C)
Recording Time : 24 hour or 7 day
Power Supply: Single “AA” battery, up to 2 years average life
Resolution: Not less than 1” per +55˚F in 1˚C or 2˚F steps
Mounting: Free standing, wall mounted or suspended
Chart Size: 3” (75mm) DIA
Dimensions: 3.667” x 3.667” x 2.232” (93mm x 93mm x 57mm)
Weight : 0.5 lbs. (227 g)
Includes: Battery, pen and instruction manual
Specications
Product
Accessories
Charts &
Calibrations Operating
Getting Started
Instructions /
Troubleshooting Warranty/
Rev. 06/03
Factory Service
& Returns
Page 4
Rev. 06/03
Charts
°F and °C Switchable 7 Day 7 Day 24 Hour 24 Hour
Range °F Chart °C Chart °F Chart °C Chart
-14 to +32°F / -20 to 0°C C302 C310 C301 C309
+4 to +50°F / -15 to +20°C C304 C312 C303 C311
+22 to +68°F / -5 to +20°C C320 C318 C319 C317
+50 to +96°F / +10 to +35°C C306 C341 C305 C313
+76 to +122°F / +25 to +50°C C308 C316 C307 C315
DICKSON
Useful Features
Applications &
Product
Accessories
Description Order #
NIST Traceable Calibration 3-pt. (new unit) N300
A2LA Accredited Calibration 3-pt. (new unit) N400
Pens (6 red) P222
Locking Wall Mount Case A715
Waterproof Pouch A711
Specications
Product
Accessories
Charts &
Calibrations Operating
Getting Started
Instructions /
Troubleshooting Warranty/
Rev. 06/03
Factory Service
& Returns
Page 5
Calibration Services - New Units
N100 - NIST Traceable Calibration 1-Point: Includes documentation to one Dickson pre -selected point
on new units only.
N300 - NIST Traceable Calibration 3- Point : Includes documentation of three Dickson pre-selected
points (a high, medium, and low) on new units only.
N400 - Deluxe A2L A Accredited NIST Traceable Calibration 3-Point: ISO Guide 25/A2LA Documentation of 3 pre- selected points of as found data before and after calibration for Dickson temperature
and/or humidity instrumentation on new units only.
N995 - NIST User Selected Temperature Points: Documentation of one customer specied point.
Should be selected in addition to one of the above calibration options.
The Importance and Benets of Regular Calibrations
Once you begin to use your precision Dickson instrumentation, regular calibrations are necessary to ensure
accurate readings.
The following Calibration Services are available:
N150 - NIST Traceable Calibration 1- Point: Includes documentation to one Dickson pre-selected point
after re -calibration.
N350 - NIST Traceable Calibration 3 -Point: Includes documentation of three Dickson pre-selected
points (a high, medium, and low) after re-calibration.
N450 - Deluxe A2LA Accredited NIST Traceable Calibration 3-Point: ISO Guide 25/A2LA Documentation of 3 pre- selected points of as found data before and after calibration for Dickson temperature
and/or humidity instrumentation.
N995 - NIST User Selected Temperature Points: Documentation of one customer specied point.
Should be selected in addition to one of the above calibration options.
DICKSON
Useful Features
Applications &
Product
Specications
Product
Accessories
Charts &
Calibrations Operating
Why should I recalibrate my instrumentation?
Over time dirt, dust and normal handling can throw your precision instrumentation out of calibration. Regular calibrations ensure that you receive the most accurate readings possible.
How often should I recalibrate my instrumentation?
Depending on the environment your instrument is used in and how often it is handled you will want to
recalibrate your instrument every 6 to 12 months. Instruments in environments where there are extreme temperatures, wide temperature ranges, humidity or pressure variations, high condensation, dirt, dust and other
debris will require calibration at least ever y 6 months. Instruments that are frequently moved or in locations
with heavy machinery that cause vibrations should also be calibrated at least every 6 months.
Why should I return my instrument to Dickson for calibration?
Dickson calibrates your instrument at the factory using proprietary production/calibration software that
guarantees proper calibration.
Our Capabilities
Dickson is the rst manufacturer of humidity and temperature instrumentation to receive A2LA accreditation.
We are also NIST Traceable; our procedures conform to MIS-STD-45662A, ANSI /NCSL 2540-1-1994, ISO/
IEC Guide 25 and ISO10012. We are experts in the manufacture and calibration of humidity and temperature
instruments.
Fast Service: Our turnaround time is 3 days or less so you receive not only expert service but fast
service as well.
Easy: We make it easy for you! No phone calls for Return Authorization Numbers are required. We
remind you when your instrument is due for calibration. You simply send in the completed Calibration
Order Form with your unit for calibration with freight prepaid to Dickson.
Rev. 06/03
Getting Started
Instructions /
Troubleshooting Warranty/
Factory Service
& Returns
Page 6
Rev. 06/03
Getting Started
• Place chart on recorder
• Set time by inserting a coin into chart hub and turning clockwise until the current hour is referenced to the
time index clip. (Time index clip is directly to the right and below the pen tip).
• Remove protective pen cap. The chart movement is self-starting and runs continuously. Allow unit to
stabilize in environment for 15 minutes.
Pen Replacement
Slide the used pen cartridge off and slide the new one on. Typical pen life is one year.
Battery Replacement
The battery compartment is located on the back of the recorder. The recorder uses a standard “AAA”
battery for up to two years of battery life.
• Insert new battery with the positive end down
Chart Rotation Speed
DICKSON
Useful Features
Applications &
Product
Specications
Product
Accessories
Charts &
The unit has a switchable clock, you can change the speed from a 7 day to a 24 hour rotation and from a
24 hour to a 7 day rotation. Make sure the right chart is selected for your rotation. Simply move the switch
located on the back of the unit to the speed that ts your application.
Calibrations Operating
Getting Started
Instructions /
Troubleshooting Warranty/
Factory Service
& Returns
Rev. 06/03
Page 7
Troubleshooting
Pen Tension
If the pen is not touching the paper, remove red pen and push the metal pen arm down near the middle of
the arm. If that does not work unscrew the pen arm from the recorder and bend the pen arm down. Make
sure the unit is in a stable environment, replace the pen arm at the same spot from where it was removed.
Chart Does Not Rotate
If the chart is not rotating make sure the center strip of the chart is inserted properly into the black center
hub of the recorder making sure the chart is not torn or ripped. If the chart is properly installed and there
is still no rotation the clock needs to be replaced, please call customer ser vice for a return authorization
number.
DICKSON
Useful Features
Applications &
Product
Specications
Product
Accessories
Charts &
Calibrations Operating
Rev. 06/03
Getting Started
Instructions /
Troubleshooting Warranty/
Factory Service
& Returns
Page 8
Warranty
Dickson warrants that the products it sells will be free from defects in material and workmanship under
normal use and service for a period of twelve months after delivery. In the event of a claim under this
warranty, the product or part must be returned to the factory for repair or replacement (shipping pre- paid)
with a Return Authorization Number (see Return Information above). It will be repaired at Dickson’s option
without charge. This warranty DOES NOT cover routine calibration, pen, chart and battery replacement. The
foregoing warranty and remedy are exclusive and in lieu of all other warranties either expressed or implied.
Dickson shall not be liable for consequential or incidental damages resulting from failure or malfunction of
its products. Dickson makes no warranty for products not manufactured by it or for any products modied by
buyer, or subject to misuse or neglect.
DICKSON
Useful Features
Applications &
Product
Factory Service & Returns
Contact the factory (630 -543 -3747) for a Return Authorization (RA) Number before returning any
instrument. The model number, serial number and a purchase order number will be requested before an RA
number is issued.
• Carefully repack the instrument, label the outside of the box with the RA# and return the instrument
(freight pre- paid) to Dickson.
• All instruments that do not have the RA# clearly marked on the outside of the box will be refused. When
returning instruments for credit, please include all accessories in shipment.
• Calibration/Freight charges are non- refundable.
NOTE: Dickson shall not be liable for consequential or incidental damages resulting from failure or
malfunction of its products.
Customer Satisfaction
Dickson takes pride in providing you, the customer, with the highest quality instrumentation. We welcome
the opportunity to help you in any way possible. Whether it be a question or a new idea in documentation,
the Dickson Company would like to hear your response. Please call our Customer Service Department at
1-800-323-2448 or (630) 543-3747 (in Illinois).
Software Return Policy
IMPORTANT-Read your Software License Agreement carefully before installing software. DIckson will accept
returns for replacement of defective disks and CDs only.
Specications
Product
Accessories
Charts &
Calibrations Operating
Getting Started
Instructions /
Troubleshooting Warranty/
Rev. 06/03
Factory Service
& Returns
DICKSON
930 South Westwood Avenue
Addison, Illinois 60101
Phone: ( 630) 543-3747 • E-mail: DicksonCSR@ dicksonweb.com
Loading...