Dickson SR200, TR220 User Manual

SR200/TR220

Getting Started

The logger is now sampling and ready for use. The

these settings, the logger will automatically go

through the clear process to accept your changes.

If not using Push-to-Start feature: To conserve

select the shortest Sample Interval and Stop When Full in

the Samples section.

this will con rm that DicksonWare™ has recognized

the logger. Should all  elds remain blank, refer to “No

this manual. Once DicksonWare™ recognizes the

Useful Features

Average for highlighted information.

A snapshot of your graph or a real-time graph of points

To Activate Push-to-Start Feature

the SETUP button to the right of the Start Date/Time

 eld. Select Push to Start as the Delay Type which will

The logger will start only when the button is pressed

DICK SON

TR220

Troubleshooting

The logger memory may be full; download the data

These loggers are designed for use in a non-condensing

try placing the unit (temperature only models) in a small

sealed plastic bag to protect it from condensation.

The battery will operate the logger for 1.5 years at room

temperature. Operation of the logger at the temperature

sample intervals of less than a minute, will signi cantly

the 4 screws in the back of the logger, replace the

The Battery Level Monitor on the Setup screen displays

the battery voltage and a Low Battery Warning when

troubleshooting guide or call (630) 543 -3747.

Verify that you have the correct version of Dickson

software installed on your PC. Version 7.2 or higher is

Verify that the correct COM port is selected: From

the main DicksonWare™ screen, click on Logger

then Communication, a black dot will appear next

to the selected COM port. You may need to select a

stating that “Device Is Already Open”, this could mean

that you have the proper COM port selected, but

try changing the COM port again in DicksonWare™.

There is a red indicator located to the right of the display.

This indicator will  ash every 10 seconds ONLY when the

ww w.dicksonweb.com

Telephone:

630-543-3747 •

630-543-0498

[e-mail]

Speci cations

Factory Service and Returns