Diamond Multimedia WR300NSI Quick Start Manual

WR300NSI

Portable Wireless-N Repeater

Quick Start Guide

Minimum System Requirements

To configure your WR300NSI repeater your computer must meet the following minimum requirements.

Any operating system can be used

Web Browser

233MHz processor

Ethernet network adapter

Package Contents

Package contents are listed below.

WR300NSI

Ethernet cable

Easy Start Guide

Resource CD (documentation only, contains no applications and all configurations are performed from
the WR300NSI’s built in web based configuration page)

Device Overview

Front Panel

LABEL

STATE

DESCRIPTION

LED RRSI

3 BARS Connected 95% and above RSSI (Excellent)

2 BARS Connected 55-94% RSSI (Recommended)

1 BAR Connected 10-54% RSSI (Weak)

Device Overview bottom panel

Device Overview top panel

Configuring the Repeater

Setting up the device is easy. Follow the steps below to configure the device for your current wireless
router/AP. Ensure to disable the wireless connection on the PC or laptop used for configuring the
WR300NSI. Please note the WR300NSI will automatically detect your existing wireless channel
encryption and security type do not change this

To configure your device via the Web GUI:

1. Connect the WR300NSI to a power outlet.

LABEL DESCRIPTION

WPS BUTTON Connect WR300NSI to any WPS capable devices