GC1000
HD Gaming Capture Box Installation Manual
Contents
V1.0
Chapter 1: GC1000 HD Gaming Capture Box Hardware Installation ............................................................... 1
1.1 Package Contents ........................................................................................................................... 1
1.2 System Requirements ..................................................................................................................... 1
1.3 Hardware Installation ..................................................................................................................... 1
Chapter 2: HD Gaming Capture Box Quick Installation ................................................................................... 3
2.1 The Driver Installation of HD Gaming Capture Box ..................................................................... 4
2.2 Diamond Video Capture Application Installation .......................................................................... 4
Chapter 3 : FAQ ................................................................................................................................................. 8
3.1 How to check if the driver has been installed successfully or not? ................................................ 8
3.2 How to uninstall device driver?...................................................................................................... 8
1
Chapter 1: GC1000 HD Gaming Capture Box Hardware Installation
1.1 Package Contents
Unpack your GC1000 HD Gaming Capture Box package and make sure that all items are intact. The
following items should be included in your package:
HD Gaming Capture Box Device
Quick start guide & Installation Manual
DVD-ROM with driver & DMCap & CyberLink PowerDirector 8
USB BM to AM cable
1.2 System Requirements
Pentium-IV 1.6GHz or higher (recommended)
1024 MB RAM of system memory or above (recommended)
One available USB2.0 port
Graphics Card (Must support DirectX 9.0c)
Sound Card (AC97 compatible sound card)
1GB Free HD Space
DVD-ROM Drive (For software installation)
Microsoft Windows XP / Windows Vista / Windows 7
1.3 Hardware Installation
Please follow the steps shown below for installation of your HD Gaming Capture Box and follow the
pictorial guide below for peripheral connections.
1. HDMI connection with video pass thru installation steps:
2. Note: for HDMI audio and video to pass through to the television set it must be connected to the
computer and the computer must be on. Unlike Component, Composite and S-Video HDMI requires
power.
3. Connect the HDMI cable from your gaming console or any other device supporting HDMI and the other
end to the HDMI labled IN on the GC1000. Connect a second HDMI cable from the HDMI out of the
GC1000 to the HDMI input on your televsion. Make sure you select the correct source input on your
television. Example if you plug the cable to HDMI 1 you must select HDMI 1 on your televsion source
input.
4. Notes: HDMI cables are not inlcuded
5. YPbPr Component connection with video pass thru installation steps:
6. Connect the YPbPr component cable from your gaming console or any other device supporting YPbPr
component and the other end to the YPbPr component labled IN on the GC1000. Connect a second
YPbPr component cable from the YPbPr component out of the GC1000 to the YPbPr component input
on your televsion. Make sure you select the correct source input on your television. Example if you plug
the cable to YPbPr component 1 you must select YPbPr component 1 on your televsion source input.
7. Composite connection with video pass thru installation steps:
8. Connect the Composite cable from your gaming console or any other device supporting composite red,
2
white and yellow color coded outputs. Connect the yellow video cable to the green input labled
Component (Y) IN on the GC1000. Connect the red and white audio cables to the audio input of the
GC1000. Using a second composite cable (not included) from the GC1000, connect the yellow video
cable from the Component green coded (Y) out from the GC1000 to your television. Connect the red and
white audio cables from the GC1000 to your television set. Make sure you select the correct source input
on your television. Example if you plug the cable to composite cable to composite 1 you must select
composite 1 on your televsion source input.
9. S-Video connection with video pass thru installation steps:
10. Connect the S-Video cable from your gaming console or any other device supporting S-Video outputs.
Connect the S-Video cable to the S-Video labeled IN on the GC1000. Connect the red and white audio
cables to the audio input of the GC1000. Using a second S-Video cable (not included) from the GC1000,
out from the GC1000 to your television. Connect the red and white audio cables from the GC1000 to
your television set. Make sure you select the correct source input on your television. Example if you plug
the cable to S-Video 1 to your television you must select S-Video 1 on your televsion source input.
11. Plug HD Gaming Capture Box into the USB 2.0 port of your system.
Loading...