SUBWOOFER INSTALLATION MANUAL
D110
D112
|
Dear Valued Customer,
Thank you for choosing Diamond Audio D1 subwoofers. These speakers represent the
latest advances in acoustic technology, and like all Diamond Audio products, are
hand built and tested using the highest grade components and state of the art techniques.
When installed properly, they will provide many years of accurate sound reproduction.
Please keep in mind that prolonged exposure to sound pressure levels in excess of
100 dB can cause permanent hearing loss. This high performance speaker system
can exceed that level, so please exercise restraint in its operation in order to preserve
your ability to enjoy its fidelity in the future.
Because of their flexible installation possibilities, please consider having your new
speakers professionally installed by an authorized Diamond Audio dealer. This will
assure a clean and efficient installation, and extend your one year warranty to three years.
At Diamond Audio, we strive to bring honest value and excellent quality to all of the
products we build. By your purchase of this product, you have joined the growing
family of discerning listeners who demand only the best. Welcome!
SUBWOOFER FEATURES
Titanium Finish IMPP Cone
Rubber Surround
Heavy Gauge Stamped Steel Basket
Long Throw Suspension
Vented Extended Pole Piece
Ferrite Magnet
2” Voice Coils
PHYSICAL DIMENSIONS
Dimension (in./mm) D110 D112
Total Diameter (A) 10.35 in. (263.5 mm) 12.4 in. (315 mm)
Mounting Diameter (B) 9.2 in. (232.5 mm) 11 in. (280 mm)
Screw Hole Diameter (C) 9.83 in. (249.7 mm) 11.8 in. (300 mm)
Mounting Depth (D) 4.6 in. (118 mm) 6.29 in. (160 mm)
Magnet Diameter (E) 5.6 in. (142 mm) 6.14 in. (156 mm)
Displacement 0.05 ft
3
(1.4 liter) 0.07 ft3 (2.0 liter)
THIELE/SMALL PARAMETERS
Parameter (unit) D110D2 D110D4 D112D2 D112D4
SPL (dB) 85.9 85.7 86.0 86.3
Re (Ω) [series] 3.6 6.8 3.8 6.7
Qms 5.860 4.207 6.239 4.406
Qes 0.479 0.596 0.600 0.680
Qts 0.443 0.522 0.547 0.589
Fs (Hz) 31.452 33.948 28.046 31.452
Vas (L) 39.047 36.777 70.968 59.906
Cms (mm/N) 252.413 237.741 207.416 175.085
Mms (g) 101.448 92.448 155.253 146.253
2
) 33.006 33.006 49.087 49.087
Sd (m
BL (T*M) 12.272 15.001 13.163 16.875
Xmax (mm) 11.5 11.5 11.8 11.8
Pwr (W) NOM/MAX 200/400 200/400 200/400 200/400
ENCLOSURE
The enclosures specified below are offered as a suggestion only. Assistance from an authorized
Diamond Audio retailer is recommended for designing the correct system for your vehicle. All volumes
below are shown as gross internal volumes, driver and vent displacement has been accounted for. The
use of a 30Hz sub-sonic filter is recommended on most vented enclosures.
Sealed D110 D112
3
) 0.75 1.2
Vb (ft
F3 (Hz)/QTC 54/0.65 41/0.88
Pe (W) 250 300
Vented
3
) 1.0 1.75
Vb (ft
Fb/F3 (Hz) 40/32 36/27
Port (in.) [dia. x length] 3 x 10 4 x 12
Pe (W) 200 250
LIMITED SPEAKER WARRANTY STATEMENT
Diamond Audio Technologies, LLC (DAT) warrants this product to be free from defects in material and
workmanship for a period of one (1) year from the original date of purchase provided it was purchased from
an authorized DAT retailer within the United States. However, if this product was installed by the authorized
DAT retailer, the warranty period will be extended to three (3) years.
THIS WARRANTY IS NOT TRANSFERABLE AND APPLIES ONLY TO THE ORIGINAL PURCHASER OF THIS PRODUCT IN
ITS ORIGINAL INSTALLATION. Original purchaser must reside in the United States and be able to provide proof
of purchase and installation with the sales receipt from the authorized DAT retailer that sold and installed the product.
Should a manufacturing defect occur during above said warranty period, DAT will replace or repair the
defective product with a product of the same or equivalent value and performance.
Damage or failure caused by any of the following is not covered under this warranty policy: negligence,
improper use, abuse, product modification, unauthorized repair attempts, accident, acts of God,
misrepresentations by DAT retailers, and improper/inadequate packaging during return shipping.
Warranty is void if serial numbers have been removed, altered or defaced.
HOW TO OBTAIN WARRANTY SERVICE
In the event a DAT product should require service, you should visit the authorized DAT retailer you purchased
the product from and they can expedite your claim. All claims must fall into the guidelines listed above and be
accompanied by a copy of the original sales and installation receipt from that authorized DAT retailer.
Product returned for warranty service must be freight-prepaid, properly packaged and clearly marked with
the Return Authorization (RA) number issued by DAT. Any product returned to DAT that is improperly packaged,
does not have a RA number clearly marked on the package, or never received a RA number may be refused
upon delivery. DAT does not assume responsibility for lost or misdirected product.
Repair or replacement under this warranty is the exclusive remedy of the consumer. DAT shall not be liable
for any incidental or consequential damages for breach of any expressed or implied warranty on this
product. Some states do not allow the exclusion or limitation of incidental or consequential damages, or allow
limitations on how long an implied warranty lasts, so the above limitations or exclusions may not apply to you.
This warranty gives you specific legal rights and you may also have other rights that may vary from state to state.
Customers outside the United States should contact their local sales office to obtain information on pricing,
exchange unit availability, instructions, service and warranty/non-warranty replacement or repair.
Diamond Audio Technologies
6915 West Frye Road
Chandler, AZ 85226 USA
Tel: 480.820.2075
Fax: 480.813.6210
Web: diamondaudio.com
©2008 Diamond Audio Technologies. All rights reserved.
Service/Tech Support:
480.820.2075
Tech Support Email
techsupport@diamondaudio.com
112607
Loading...