
K540KM
Mirror/Luggage Rack Mount
General Specifications
• Low loss SO-239 type base for popular VHF/UHF antennas.
• Coaxial cable: 13 ft. RG-58C/U with PL-259 connector.
• Adjustment nut for antenna position. (Figure A)
• Black anodized finish.
• Maximum recommended antenna height is 50 inches.
Installation Instructions
(1) Choose desired mounting location on vehicle to
ensure maximum strength of mount and best
performance of antenna.
(2) When best location is determined, fasten mount
to vehicle by appropriate means: use phillips head
screwdriver and adjustable wrench. Hex wrench
included for mount body adjustment.
(3) Route the coaxial cable from antenna mount to
radio. Install the PL-259 connector (supplied with
mount) to cable end. Connector installation
instructions are inscribed on connector package.
Connect cable to radio.
The K540KM is recommended for most pipe mirrors
A
B
and luggage racks having 1/2” to 7/8” diameter bars.
This mount has an adjustment plate with four phillips
head screws. Remove nuts, position mount in desired location, and fasten nuts. (Figure B)
Please check our website for installation ideas.
When completed, waxing the black portion of the mount will help maintain appearance.
DIAMOND ANTENNA Products are distributed by RF PARTS COMPANY
435 S. Pacific Street • San Marcos, CA 92078 • (760) 744-0900
www.diamondantenna.net