M-6 CORE BORE
DRILLING MACHINE
PARTS LIST
February 26, 2014
Part # 1800844
Notification of Spark Arrester Requirement for
Proposition 65
State of California
Warning !
Engine exhaust and some its constituents are known to the State
of California to cause cancer, birth defects, and/or other
reproductive harm.
State of California
It is a violation of Section 4442 or 4443 to use or operate the
engine on any forest-covered, brush-covered, or grass-covered land
unless the engine is equipped with a spark arrester, as defined in
Section 4442, maintained in effective working order or the engine
is constructed, equipped, and maintained for the prevention of fire
pursuant to Section 4443.
TABLE OF CONTENTS
Description Page No.
Anchor Drill Stand with Wheels and Carriage ............................................................................... 4
Steel Base Drill Stand with Carriage .............................................................................................. 5
Anchor Drill Stand with Wheels Assembly .................................................................................... 6
Steel Base Stand Assembly ........................................................................................................... 7
Heavy Duty Roller Carriage Assembly ........................................................................................... 8
Autofeed Quick Disconnect Carriage Assembly ................................................................... 10 - 11
Carriage Plate Assembly – Right and Left Side............................................................................ 12
Quick Disconnect Motor Mount Assembly ................................................................................. 13
Quick Disconnect Motor Plate .................................................................................................... 14
Quick Disconnect Adapter Assembly .......................................................................................... 15
Adjustable Roller Assembly......................................................................................................... 16
Non- Adjustable Roller Assembly ................................................................................................ 17
Pinion Gear Assembly ................................................................................................................. 18
Spur Gear Assembly .................................................................................................................... 19
Side Roller Assembly ................................................................................................................... 20
Warranty ....................................................................................................................... Rear Cover
#4277581
4
M-6 Large Anchor Drill Stand w/Carriage
1
2
3
4
5
6
3
ITEM PART NO. QTY. DESCRIPTION
1 4640000 1 M-6 Mast w/Gear Rack, 72" Long
2 4640114 1 Carriage Assembly, M-6
3 2900042 2 Lock Washer, 3/4" Split
4 2900041 1 Hex Nut, 3/4-10
5 4640005 1 Large Anchor Base Assembly, M-6
6 2900351 2 Cap Screw, Hex Hd., 3/4-10 x 8"
#4277589
5
M-6 Steel Base Drill Stand w/Carriage
3
2
1
ITEM PART NO. QTY. DESCRIPTION
1 4640083 1 M-6 Steel Base Assembly
2 4640114 1 Carriage Assembly, M-6
3 4640000 1 M-6 Mast w/Gear Rack, 72" Long
#4640005
6
M-6 Large Anchor Base Assembly
6
3 4
6
2
5
2
6
2
3
2
5
ITEM PART NO. QTY. DESCRIPTION
1 4640006 1 M-6 Large Anchor Base Assembly
2 2900058 4 Flat Washer, 1/2" SAE
3 4640034 2 Wheel Bushing
4 2500003 2 Wheel 6" x 1-1/2" x 5/8"
5 2900105 2 Cap Screw, Hex Hd., 1/2-13 x 2-3/4"
6 2900104 4 Tap Bolt, Hex Hd., 5/8-11 x 6"
1
#4640083
7
M-6 Steel Anchor Base Assembly
9
8
7
1
2
6
5
4
3
ITEM PART NO. QTY. DESCRIPTION
1 2500299 2 Wheel, 6" X 2" X 1"
2 2500009 2 Set Collar, 1" ID
3 2900609 4 Heavy Hex Nut, 3/4-10
4 2900042 4 Lock Washer, 3/4" Split
5 4640088 1 Steel Base Weldment, M-6
6 4640085 1 Mast Retainer, M-6
7 2900608 4 Cap Screw, Hex Hd., 3/4-10 x 9"
8 2900112 4 Hex Nut, 5/8-11
9 2900104 4 Tap Bolt, Hex Hd., 5/8-11 x 6"
1
2
#4640114
8
M-6 Carriage Assembly
2
3
4
1
6
7
8
9
ITEM PART NO. QTY. DESCRIPTION
1 4640029 1 Spoke Handle Assembly, M-6, Complete
2 4640099 1 M-6 Right Side Carriage Plate Ass'y
3 4640013 3 Non-Adjustable Roller Assembly, M-6
4 4640015 1 Pinion Gear Assembly, M-6
5 4640017 1 Spur Gear Assembly, M-6
6 4640098 1 M-6 Left Side Carriage Plate Ass'y
7 4699997 1 M6 QD Motor Mount Assembly
8 2500697 2 Retaining Ring, 1/2" Ext. 5100-50
9 4640033 8 Side Roller Assembly, M-6 Only
10 4640024 1 Cover Plate, M-6, Power Raise & Lower
11 4640023 1 Carriage Lock, M-6
12 2900247 4 Cap Screw, Soc. Hd., 1/4-20 x 3/4"
13 4640009 3 Adjustable Roller Assembly, M-6
5
8
13
12
11
10
9
Intentionally Blank
#4640115
10
M-6 Autofeed Quick Disconnect Carriage Assembly
23
Isometric View
37
34
32
33
24
22
35
32
25
31
4
36
5
7
26
27
13
39
28
29
3
11
12
6
7
8
109
38
30
19
2
1
14
21
17
16
15
18
15
13
16
20
#4640115
11
M-6 Autofeed Quick Disconnect Carriage Assembly
ITEM PART NO. QTY. DESCRIPTION
1 4640050 1 Cover Plate
2 2900116 4 Cap Screw, Soc. Hd., #10-24 x 3/4"
3 2500249 1 Sprocket, #35,10 Tooth
4 4640092 1 Spur Gear Assembly, Modified, M-6
5 4640049 1 Chain Guard for Hyd. M-6
6 2900103 2 Cap Screw, Soc. Hd., 5/16-18 x 1"
7 2900031 4 Lock Washer, 5/16" Split
8 2900506 3 Cap Screw, Flat Head, 1/4-28 x 3/4"
9 4640048 1 Motor Mount (OMM Hyd.)
10 2600083 1 Hydraulic Motor, Danfoss OMM32
11 3200271 1 Elbow, 3/8" O-Ring to 3/8" M. JIC
12 3200272 1 Long Elbow, 3/8" O-Ring to 3/8" M. JIC
13 2900010 6 Lock Nut, 1/4-20 Nylon
14 3200263 2 Adapter, 3/8" O-Ring to 3/8" M. JIC
15 3200138 2 Adapter, 1" O-Ring to 3/4" F. Pipe
16 3200036 2 Elbow, 3/4" Male Pipe
17 3200101 1 Nipple, 3/4" Quick Disconnect
18 4640093 3 Threaded Rod, 1/4-20 x 4"
19 3200499 1 Manifold, M-6 Autofeed
20 3200100 1 Coupler, 3/4" Quick Disconnect
21 3200392 2 Hose Assembly, 3/8" x 14" Lg. HP
22 4641023 1 Handle Housing, M-6
23 4641016 4 Handle, Spoke, M-2
24 2900124 1 Cap Screw, Soc. Hd., 3/8-16 x 1-3/4"
25 6011089 1 Key, 1/4" Sq. x 1" Long
26 2900912 2 Cap Screw, Soc. Hd., 5/16-18 x 3/4"
27 4640053 1 Sprocket, Hydraulic, M-6
28 6020018 1 Chain, #35,68 Pitch Length
29 2500020 1 #35 Offset Link
30 2900247 4 Cap Screw, Soc. Hd., 1/4-20 x 3/4"
31 4640009 3 Adjustable Roller Assembly, M-6
32 4640033 8 Side Roller Assembly, M-6 Only
33 4640013 3 Non-Adjustable Roller Assembly, M-6
34 4640098 1 M-6 Left Side Carriage Plate Ass'y
35 4640099 1 M-6 Right Side Carriage Plate Ass'y
36 4640015 1 Pinion Gear Assembly, M-6
37 4699997 1 M6 QD Motor Mount Assembly
38 4640024 1 Cover Plate, M-6, Power Raise & Lower
39 2900416 2 Tap Screw, Hex Hd., 1/4-20 X 1-1/2"
M-6 Carriage Plate Assemblies
12
Right and Left Side
#4640099
Right Side
2
1
ITEM PART NO. QTY. DESCRIPTION
1 4640117 1 Carriage Plate, Right Side
2 2400006 2 Bearing, 1" x 1-1/4" x 7/8"
#4640098
Left Side
2
1
ITEM PART NO. QTY. DESCRIPTION
1 4640116 1 Carriage Plate, Left Side, Hyd. M-6
2 2400006 2 Bearing, 1" x 1-1/4" x 7/8"
Isometric ViewIsometric View
13
4699997
M-6 Quick Disconnect Motor Mount Assembly
2
1
ITEM PART NO. QTY. DESCRIPTION
1 4699995 1 M6 QD Motor Mount Assembly
2 4699996 1 M6 QD Motor Mount Adapter Assembly
Isometric ViewIsometric View
14
2
#4699995
M-6 Quick Disconnect Motor Plate
1
8
7
4
4
3
2
ITEM PART NO. QTY. DESCRIPTION
1 4699993 1 Quick Disconnect Motor Mount
2 2900183 8 Capscrew, Soc Hd., 3/8"-16 X 1-3/8"
3 2900088 4 Cap Screw, Soc. Hd., 1/4-20 x 1"
4 2900089 4 Cap Screw, Soc. Hd., 1/4-28 x 1"
5 2400144 1 Bronze Bearing, 1-3/8" x 1"
6 2900353 1 Dowel Pin, 3/4" Dia. x 6"
7 4641010 1 Key, 1/2" Sq. x 4" Long
8 4645006 1 Key, 3/8" Sq. x 4"
5
6
Isometric ViewIsometric View
15
#4699996
M-6 Quick Disconnect Adapter Assembly
2
3
4
1
2
7
5
6
ITEM PART NO. QTY. DESCRIPTION
1 4699994 1 QD Motor Mount Adapter
2 2900285 2 Cap Screw, Button Hd., 3/8-24 x 1/2"
3 4600110 1 Cam Shaft Bushing
4 2900724 6 Cap Screw, Soc. Hd., 3/8-16 x 1-1/4"
5 4600109 1 Cam Shaft Housing
6 4600108 1 Cam Lock Shaft
7 2400143 1 Ball Plunger M8
#4640009
16
M-6 Adjustable Roller Assembly
1
2
3
4
5
6
4
3
2
1
ITEM PART NO. QTY. DESCRIPTION
1 2900112 2 Hex Nut, 5/8-11
2 2900113 2 Lock Washer, 5/8" Split
3 2900002 2 Flat Washer, 5/8" SAE
4 4640010 2 Roller, 2.50" Dia.
5 4640012 1 Eccentric Shaft
6 4640011 1 Spacer, 7/8" O.D.
#4640013
17
M-6 Non-Adjustable Roller Assembly
5
4
3
1
2
ITEM PART NO. QTY. DESCRIPTION
1 4640028 1 Straight Shaft, M-6
2 4640014 1 Roller, 1.50" Dia.
3 2900002 2 Flat Washer, 5/8" SAE
4 2900113 2 Lock Washer, 5/8" Split
5 2900112 2 Hex Nut, 5/8-11
3
4
5
#4640015
18
M-6 Pinion Gear Assembly
1
2
1
ITEM PART NO. QTY. DESCRIPTION
1 2500711 2 Retaining Ring,1"
2 4640016 1 Spur Gear
#4640017
19
M-6 Spur Gear Assembly
2
1
ITEM PART NO. QTY. DESCRIPTION
1 4640018 1 Spur Gear Assembly, M-6
2 2500711 2 Retaining Ring,1"
2
#4640033
20
M-6 Only, Side Roller Assembly
5
1
4
3
2
ITEM PART NO. QTY. DESCRIPTION
1 4647106 1 Side Roller Shaft
2 2400011 6 Aluminum Gasket Shim, .005"
3 4647113 1 Side Roller, Plastic
4 4647102 1 Side Roller Housing
5 2900116 4 Cap Screw, Soc. Hd., #10-24 x 3/4"
NOTES
21
____________________________________________________
____________________________________________________
____________________________________________________
____________________________________________________
____________________________________________________
____________________________________________________
____________________________________________________
____________________________________________________
____________________________________________________
____________________________________________________
____________________________________________________
____________________________________________________
____________________________________________________
____________________________________________________
____________________________________________________
____________________________________________________
____________________________________________________
____________________________________________________
____________________________________________________
____________________________________________________
____________________________________________________
____________________________________________________
____________________________________________________
____________________________________________________
____________________________________________________
____________________________________________________
____________________________________________________
____________________________________________________
____________________________________________________
NOTES
22
____________________________________________________
____________________________________________________
____________________________________________________
____________________________________________________
____________________________________________________
____________________________________________________
____________________________________________________
____________________________________________________
____________________________________________________
____________________________________________________
____________________________________________________
____________________________________________________
____________________________________________________
____________________________________________________
____________________________________________________
____________________________________________________
____________________________________________________
____________________________________________________
____________________________________________________
____________________________________________________
____________________________________________________
____________________________________________________
____________________________________________________
____________________________________________________
____________________________________________________
____________________________________________________
____________________________________________________
____________________________________________________
____________________________________________________
NOTES
23
____________________________________________________
____________________________________________________
____________________________________________________
____________________________________________________
____________________________________________________
____________________________________________________
____________________________________________________
____________________________________________________
____________________________________________________
____________________________________________________
____________________________________________________
____________________________________________________
____________________________________________________
____________________________________________________
____________________________________________________
____________________________________________________
____________________________________________________
____________________________________________________
____________________________________________________
____________________________________________________
____________________________________________________
____________________________________________________
____________________________________________________
____________________________________________________
____________________________________________________
____________________________________________________
____________________________________________________
____________________________________________________
____________________________________________________
EQUIPMENT AND PARTS
WARRANTY
Diamond Products warrants all equipment manufactured by it against defects
in workmanship or materials for a period of one (1) year from the date of
shipment to Customer.
The responsibility of Diamond Products under this Warranty is limited to
replacement or repair of defective parts at Diamond Products’ Elyria, Ohio
factory, or at a point designated by it, of such parts as shall appear to us upon
inspection at such parts, to have been defective in material or workmanship,
with expense for transportation and labor borne by Customer.
In no event shall Diamond Products be liable for consequential or
incidental damages arising out of the failure of any Product to operate properly.
Integral units such as engines, electric motors, batteries, transmissions,
etc., are excluded from this Warranty and are subject to the prime
manufacturer’s warranty.
THIS WARRANTY IS IN LIEU OF ALL OTHER WARRANTIES, EXPRESSED
OR IMPLIED, AND ALL SUCH OTHER WARRANTIES ARE HEREBY
DISCLAIMED.
333 Prospect Street, Elyria, Ohio 44035
(440) 323-4616 • (800) 321-5336 • Fax (440) 323-8689
www.diamondproducts.com
Printed in U.S.A.
Loading...