Diamond D353, D363, D363.5, D343i, D353i Installation Manual
...
D343 | D353 | D363
|
D363.5
D343i
|
D353i | D363i | D363.5i | D373i
|
D393i
SPEAKER INSTALLATION MANUAL
2
©2008 Diamond Audio Technologies. All rights reserved.
SPECIAL THANKS
Dear Valued Customer,
Thank you for choosing Diamond Audio D3 speakers. These speakers represent the latest advances in
acoustic technology, and like all Diamond Audio products, are hand built and tested using the highest
grade components and state of the art techniques. When installed properly, they will provide many
years of accurate sound reproduction.
Please keep in mind that prolonged exposure to sound pressure levels in excess of 100 dB can cause
permanent hearing loss. This high performance speaker system can exceed that level, so please
exercise restraint in its operation in order to preserve your ability to enjoy its delity in the future.
Because of their exible installation possibilities, please consider having your new speakers
professionally installed by an authorized Diamond Audio dealer. This will assure a clean and efcient
installation, and extend your one year warranty to three years.
At Diamond Audio, we strive to bring honest value and excellent quality to all of the products we
build. By your purchase of this product, you have joined the growing family of discerning listeners who
demand only the best. Welcome!
3
©2008 Diamond Audio Technologies. All rights reserved.
FEATURES
• Textured Copolymer Cones
• Rubber Surrounds
• Proprietary Composite Frames
• Flat Progressive Spider
• Extended Pole Motor Design
• Rubber Boot Magnet Protector
• Aluminum Dome Tweeters with Ferro Fluid Cooling
• Model Specic Crossovers
• Shallow Mount
On-board Crossovers
Each D3 coaxial features an on-board 12 dB/octave crossover and tweeter protection to ensure
absolute delity and protection during audio reproduction.
Standard Connection
D3 integrated systems are shipped congured for a single channel per speaker. Simply connect the
speaker wire from the source to the exposed positive and negative terminals on the speaker.
Bi-amp Connection
An exclusive feature of the D3 integrated systems is the option to power the tweeter and mid-bass
driver separately. This feature is called Bi-amping and all D3 coaxials can be bi-amped except D343i.
This ability allows for external active lter, phase, and time alignment for each of the drivers independently. To bi-amp the speaker, remove the two jumper leads from the tweeter terminals on the speaker
and connect separate power to the woofer and tweeter terminals.
Loading...