Page 1
扫描二维码
获得更多产品详情
Scan the QR code for more
more product details
风火轮机器人
Flamewheel Robot
安装手册
Instruction Manual
A5
A2
B5
B2
所需工具 / Tools Required
B3
B1
A
A4
请按组装顺序依次拆卸零件。
* 6岁以下儿童请在家长陪同下完成，避免发生吞食情况。
A1
B
A3
B4 B4B7B7 B6B7B6
Please follow the sequence of the assembling to disassemble the parts.
* Children under six years must be in the company of parents to avoid ingeson.
1 2
请检查A2圆孔位置是否正确。请按A1红色图标位置放置零件。
Please follow the A1 red instrucon to set the part.
B1
Please check and confirm the posion of A2 circular holds.
* 套件不含工具和电池
* The suite does not contain tools and baeries.
M3 十字螺丝刀
M3 Cross Screwdriver
A1
A2
B2
如结构有松动，属正常现象。
It is normal that the structure is unghten.
3 4
请按A3红色图标位置放置零件。
Please follow the A3 red icon instrucon to set the part.
A3
C2
90°
B3
请按图示方向将B3用力旋转90°。
Please follow the instrucon
to rotate B3 90° by some force.
请检查红色图标位置是否一致。
Please check and confirm the posion of red icon in accordance.
5 6
Page 2
接线柱使用方法：
Instruction of binding post:
(a) 请先拧松螺丝。
①
②
①
(a) Loose the screw.
②
D
③
(b) 插入连接线。
(b) Insert the wire.
C3
B7
C1
③
(c) 再拧紧螺丝。
(c) Tighten the screw.
8
8
特别注意: 请再次确认接线是否正确
和牢固。请勿将电池盒红黑线接反，
否则可能导致电路板烧坏！
Warning! Please check and confirm
the wires connection of battery box
in right position and tightly connected.
Incorrect way of installation would
cause the circuit board boiled.
7
A5
D2
C1
B4
B5
D3
B6
B4
B6
D3
A4
D1
请检查轮子是否插紧。请将线放于电池盒下方。
Please set the wire under the battery box.
Please check that the wheels seated.
9 10
11
请按正确极性安装电池，同时电源指示灯点亮。请
勿将不同类型或者新旧电池混用。
* 如出现电源指示灯不亮的情况，请检查电池盒接线是否正确和
牢固。或者电池极性是否装反。
Please install batteries in the correct polarity.
The power LED will light when power is on.
Please do not mix different types or old
and new batteries.
* If the Power LED does not light, please check
and confirm the wires connection of battery box
in right position and tightly connected, or the
batteries are in the wrong polarity.
STEP 1: 扫描二维码，下载软件GoBLE。
STEP 1: Scan QR code, download the APP— GoBLE
(仅支持iOS平台)
Only supports iOS platform
STEP 2: 请进入手机的设置界面，启动蓝牙功能。
STEP 2: Please enter the phone settings interface,
turn on the Bluetooth function.
12
STEP 3: 打开APP, 将手机靠近风火轮, 进行蓝牙自动连接。 STEP 4: 通过摇杆和按键，操控风火轮运动方向。
STEP 3: Open the APP, put the phone close to Flamewheel Robot,
process automatic Bluetooth connection.
蓝牙图标呈绿色，表示蓝牙设备已连接
The Bluetooth icon in green means
Link 灯亮，表示蓝牙连接成功
The Link LED lighten means
the Bluetooth connection succeeded.
STEP 4: Use rocker and buttons to control
the direction of the Flamewheel Robot motion.
that the Bluetooth device is online.
* 如出现蓝牙连接失败或者连接后无法操控的情况，
请先断开设备电源，重启APP，重新建立蓝牙连接。
目前暂不支持多台设备同时操控。
13
* If Bluetooth connection fails
or robot is uncontrollable after connection.
Power off the robot，restart the app
and reconnect the Bluetooth.
Currently it does not support multiple devices
to control at the same time.
* 如出现风火轮操控方向与运动方向不一致的情况，请检查电机C2
的红黑两线是否接反。
* If the direction of Flamewheel Robot motion does not accord
with direction of control, please check and confirm the red and
black wires connection of the motor C2 in the right polarity.
14
Loading...