DFI 865PE Infinity User Manual

Page 1
Rev. B+
System Board User’s Manual
Carte Mère Manuel Pour Utilisateur
System-Platine Benutzerhandbuch
Manual del Usuario de Placas Base
Руководство Пользователя
935-865PE7-000
74740410
Page 2
Copyright
This publication contains information that is protected by copy­right. No part of it may be reproduced in any form or by any means or used to make any transformation/adaptation without the prior written permission from the copyright holders.
This publication is provided for informational purposes only. The manufacturer makes no representations or warranties with respect to the contents or use of this manual and specifically disclaims any express or implied warranties of merchantability or fitness for any particular purpose. The user will assume the entire risk of the use or the results of the use of this document. Further, the manufacturer reserves the right to revise this publication and make changes to its contents at any time, without obligation to notify any person or entity of such revisions or changes.
© 2004. All Rights Reserved.
Trademarks
Windows® 98 SE, Windows® ME, Windows® 2000, Windows NT
4.0 and Windows® XP are registered trademarks of Microsoft Corporation. Intel
®
, Pentium® 4 and Celeron® are registered trademarks of Intel Corporation. Award is a registered trademark of Award Software, Inc. Other trademarks and registered trade­marks of products appearing in this manual are the properties of their respective holders.
Caution
®
To avoid damage to the system:
• Use the correct AC input voltage range.
To reduce the risk of electric shock:
• Unplug the power cord before removing the system chassis
cover for installation or servicing. After installation or servicing, cover the system chassis before plugging the power cord.
Battery:
• Danger of explosion if battery incorrectly replaced.
• Replace only with the same or equivalent type recommend
by the manufacturer.
Page 3
• Dispose of used batteries according to the battery manufac­turer’s instructions.
Joystick or MIDI port:
• Do not use any joystick or MIDI device that requires more than 10A current at 5V DC. There is a risk of fire for devices that exceed this limit.
FCC and DOC Statement on Class B
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instruction manual, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and the receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio TV technician for help.
Notice:
1. The changes or modifications not expressly approved by the party responsible for compliance could void the user's author­ity to operate the equipment.
2. Shielded interface cables must be used in order to comply with the emission limits.
Page 4
1
Quick Setup Guide
Table of Contents
Guide
Quick Setup
Chapter 1
Quick Setup Guide.................................................
Chapter 2
English......................................................................
17
Chapter 3
Français....................................................................
23
Chapter 4
Deutsch...............................................................................
29
Chapter 5
Español............................................................................
35
Chapter 6
Русский...........................................................................
The user’s manual in the provided CD contains detailed information about the system board. If, in some cases, some information doesn’t match those shown in this manual, this manual should always be regarded as the most updated version.
Le manuel d’utilisateur dans le CD muni contient renseignement détaillé au sujet de carte de système. Si, en quelque cas, quelque renseignement n’appareille de ce que dit dans ce manuel, ce manuel doit toujours être considéré comme la plus nouvelle version.
Das Benutzerhandbuch in der angebotenen CD enthält detaillierte Informationen über die Hauptplatine. Wenn in manchen Fällen manche Informationen nicht denjenigen Informationen dargestellt in diesem Handbuch entsprechen, soll dieses Handbuch als die meist aktualisierte Ausgabe gelten.
El uso explicativo contene información detalle sobre la sistema board en el CD preparativo. Si en algún caso, la información no es igual con el uso explicativo, necesita ver el uso explicativo, esque es más nuevo.
В руководстве пользователя на предоставляемом CD диске содержится подробная информация о материнской плате. Иногда напечатанное руководство может не совпадать руководством на CD, так как последнее наиболее часто обновляется и является самым свежим.
41
5
4
Page 5
Chapter 1 - Quick Setup Guide
Quick Setup Guide
1
1.1 System Board Layout
Guide
Quick Setup
5
Page 6
1
Guide
Quick Setup
Quick Setup Guide
1.2 Jumpers
1.2.1 Clear CMOS Data
(default)
312 312
Clear CMOS Data
JP5
1-2 On: Normal
1.2.2 PS/2 Keyboard/Mouse Power Select
3
JP1
2
1
1-2 On: VCC
(default)
If you are using the Wake-On-PS/2 Keyboard/Mouse function, the 5VSB
power source of your power supply must support 720mA.
6
2-3 On: 5VSB
2-3 On:
3 2 1
Page 7
1.2.3 USB Power Power Select
Quick Setup Guide
1
3 2 1
2-3 On: 5VSB
2-3 On: 5VSB1-2 On: VCC
USB 1-4
(JP1)
USB 5-8
(JP4)
1-2 On: VCC
3 2 1
(default)
312 312
(default)
If you are using the Wake-On-USB Keyboard function for 2 USB ports,
the 5VSB power source of your power supply must suppor t 1.5A.
If you are using the Wake-On-USB Keyboard function for 3 or more USB ports, the 5VSB power source of your power supply must sup-
port 2A.
1.3 Rear Panel I/O Ports
RJ45
PS/2
Mouse
PS/2
K/B
COM
Parallel
S/PDIF-in
IEEE
1394
USB 1-2
S/PDIF-out
LAN
USB 3-4
Mic-in
Line-in
Center/Bass
Rear out
Line-out
Guide
Quick Setup
7
Page 8
1
Guide
Quick Setup
Quick Setup Guide
1.4 I/O Connectors
1.4.1 S/PDIF-in/out
S/PDIF-in
S/PDIF-out
RCA Jacks
SPDIF out
Key
GND
VCC
15
For optical S/PDIF cable connection.
1.4.2 IEEE 1394
SPDIF in
J4
1394_1
TPA-
Ground
2 1
TPA+
Ground
8
TPB-
TPB+
VCC
VCC
Shield
10
Key
9
1394_2
1394_3
Page 9
1.4.3 USB
USB 2 USB 1
USB 4 USB 3
1.4.4 Audio
Mic-in
Line-in
Line-out
Quick Setup Guide
1
Guide
Quick Setup
Ground
N. C.
+Data
VCC
-Data
-Data +Data
Ground
Key
10
9
USB 5-6 USB 7-8
2 1
VCC
Center/Bass
Rear out
AuD_Vcc
AuD_R_Return
GND
2
1
Mic
Mic Power
AuD_R_Out
AuD_L_Return
Key
10
9
N. C.
AuD_L_Out
Front
Center/Bass and Rear Out Jacks
audio
support 4 audio output signals: center channel, subwoofer, rear right channel and rear left channel. These 4 audio output signals together with the line-out (2-channel) jack suppor t 6-channel audio output.
9
Page 10
1
Guide
Quick Setup
Quick Setup Guide
1.4.5 Game
2
1
15
1.4.6 Internal Audio Connectors
Ground Ground
Left audio
Right audio channel
channel
14
CD-in
Ground Ground
Left audio
Right audio channel
channel
14
AUX-in
10
865pe infinity 74740410 1.pmd 3/15/2004, 8:34 AM10
Page 11
1.4.7 Floppy Disk Drive Connector
1.4.8 IDE Disk Drive Connectors
Quick Setup Guide
33
34
21
1
Guide
Quick Setup
865pe infinity 74740410 1.pmd 3/15/2004, 8:34 AM11
40
IDE 2
IDE 1
21
IDE 2
39
40
21
39
IDE 1
11
Page 12
1
Guide
Quick Setup
Quick Setup Guide
1.4.9 Serial ATA Connectors
SATA 1-2
17
RXP
TXP
RXN
TXN
GND
RXP
RXN
TXN
GND
TXP
GND
GND
SATA 2
SATA 1
RAID SATA 1
RAID SATA 2
GND
RAID SATA 1-2
7
GND
The Silicon Image Sil3112A chip allows configuring RAID on SATA drives. It supports RAID 0 and 1. Refer to the Silicon Image RAID User’s Manual for more information about the utility. The manual is included in the CD.
1.4.10 IrDA Connector
1
IRRX
N. C.
Ground
VCC
15
IRTX
12
865pe infinity 74740410 1.pmd 3/15/2004, 8:34 AM12
Page 13
1.4.11 Fan Connectors
Quick Setup Guide
1
1.4.12 Wake-On-LAN Connector
Sense
Power
Ground
Sense
Powe r
On/Off
Sense
Power
On/Off
+5VSB
CPU fan
2nd fan
Chassis fan
Ground
1
WOL
3
1
Guide
Quick Setup
3
1
3
1
3
865pe infinity 74740410 1.pmd 3/15/2004, 8:35 AM13
13
Page 14
1
Guide
Quick Setup
Quick Setup Guide
1.4.13 Chassis Open Alarm Connector
Chassis signal
Ground
12
1.4.14 DIMM Standby Power LED
DIMM Standby Power LED
If the DIMM Standby Power LED is lighted, you must power-off the system then turn off the power supply’s switch or unplug the power cord prior to installing any memory modules.
14
865pe infinity 74740410 1.pmd 3/15/2004, 8:35 AM14
Page 15
Quick Setup Guide
1.4.15 Power Connectors
11
3.3V
-12V
Ground
PS-ON Ground Ground Ground
-5V +5V +5V
Ground
Ground
The system board requires a minimum of 250 Watt power supply to operate. Your system configuration (amount of memory, add-in cards, peripherals, etc.) may exceed the minimum power requirement. To en­sure that adequate power is provided, use a 300 Watt (or greater) power supply.
3.3V
3.3V Ground
+5V Ground +5V Ground PW-OK 5VSB +12V
10120
+12V
1
3
24
+12V
1
Guide
Quick Setup
865pe infinity 74740410 1.pmd 3/15/2004, 8:35 AM15
15
Page 16
1
Guide
Quick Setup
Quick Setup Guide
1.4.16 Front Panel Connectors
Pin
HD-LED
(Primary/Secondary IDE LED)
Reserved
ATX-SW
(ATX power switch)
Reserved
RESET
(Reset switch)
SPEAKER
(Speaker connector)
PWR-LED
(Power/Standby LED)
3 5
14 16
8
10
18 20
7 9
13 15 17 19
2 4 6
RESET
ATX-SW
HD-LED
PWR-LED
SPEAKER
J15
19
20
Pin Assignment
HDD LED Power HDD
N. C. N. C.
PWRBT+ PWRBT-
N. C. N. C.
Ground H/W Reset
Speaker Data N. C. Ground Speaker Power
LED Power (+) LED Power (+) LED Power (-) or Standby Signal
1 2
16
865pe infinity 74740410 1.pmd 3/15/2004, 8:35 AM16
Page 17
Chapter 2 - English
2.1 Features and Specifications
Processor
®
Pentium® 4 (Prescott and Northwood) processor up to
• Intel
3.2GHz+
- Intel Hyper-Threading Technology
- FSB: 533MHz and 800MHz
®
• Intel
Celeron® processor
- 400MHz system data bus
Chipset
®
865PE chipset
• Intel
System Memory
• Suppor ts four 184-pin DDR DIMM sockets
• Suppor ts dual channel (128-bit wide) memor y interface
• Suppor ts up to 4GB system memory
• Synchronous operation with processor system bus
• Suppor ts non-ECC (x64) DIMM using 128Mb, 256Mb or
• Suppor ts unbuffered DIMMs
BIOS
• Award BIOS, Windows
®
865PE (MCH)
- Intel
®
82801EB (ICH5)
- Intel
- Each channel supports 2 DIMM sockets
- PC2100/PC2700/PC3200 (DDR266/DDR333/DDR400) with 800MHz FSB CPU. DDR333 will run at 320MHz memory frequency when used with 800MHz FSB CPU.
- Use PC2100/PC2700 (DDR266/DDR333) with 533MHz FSB CPU
- Use PC2100 (DDR266) with 400MHz FSB CPU
512Mb
®
compatible
98SE/2000/ME/XP Plug and Play
English
2
English
865pe infinity 74740410 2.pmd 3/15/2004, 8:35 AM17
17
Page 18
2
English
English
• Genie BIOS provides:
- CPU/DRAM overclocking
- AGP/PCI/SATA overclocking
- CPU/DIMM/AGP overvoltage
• Suppor ts SCSI sequential boot-up
• Supports DMI 2.0 function
• 4Mbit flash memory
Energy Efficient Design
• ACPI STR (Suspend to RAM) function
• Wake-On-PS/2 Keyboard/Mouse
• Wake-On-USB Keyboard
• Wake-On-Ring
• Wake-On-LAN
• RTC timer to power-on the system
• AC power failure recovery
System Health Monitor Functions
• Monitors CPU/system temperature and overheat alarm
• Monitors CPU/1.5V/5VSB/VBAT/3.3V/5V/±12V voltages and failure alarm
• Monitors the speed of the CPU, chassis and 2nd fans and fail­ure alarm
• Automatic chassis fan and 2nd fan on/off control
• Read back capability that displays temperature, voltage and fan speed
• Opened chassis alarm
Onboard Audio Features
• 20-bit stereo full-duplex codec with independent variable sam­pling rate
• High quality differential CD input
• True stereo line level outputs
• S/PDIF-in/out interface
• 6-channel audio output
Onboard Gigabit LAN PCI
• Realtek RTL8110S Gigabit LAN PCI controller
• Integrated power management functions
18
865pe infinity 74740410 2.pmd 3/15/2004, 8:35 AM18
Page 19
English
• Full duplex support at both 10, 100 and 1000 Mbps
• Suppor ts IEEE 802.3u auto-negotiation
• Suppor ts wire for management
SATA IDE Interface with RAID
• Silicon Image Sil3112A PCI to Serial ATA controller
• Suppor ts two SATA (Serial ATA) interfaces which are compli­ant with SATA 1.0 specification (1.5Gbps interface)
• Supports RAID 0 and RAID 1
IEEE 1394 Interface
2
• VIA VT6306 PCI 1394 integrated host controller
• Suppor ts three 100/200/400 Mb/sec ports
PCI Bus Master IDE Controller
• Supports ATA/33, ATA/66 and ATA/100 hard drives
• PIO Mode 4 Enhanced IDE (data transfer rate up to 14MB/ sec.)
• Bus mastering reduces CPU utilization during disk transfer
• Suppor ts ATAPI CD-ROM, LS-120 and ZIP
Processor Socket
• Socket 478
AGP (Accelerated Graphics Port)
• Suppor ts AGP 3.0 (AGP 4x and 8x) and AGP 2.0 (AGP 1x and 4x)
• Suppor ts 1.5V AGP 8x (2.13GB/sec.) and AGP 4x (1066MB/ sec.) add-in cards. AGP 2x and 3.3V AGP card are not sup­ported.
Rear Panel I/O Ports (PC 99 color-coded connectors)
• 1 PS/2 mouse port
• 1 PS/2 keyboard port
• 1 DB-9 serial port
• 1 DB-25 parallel port
• 4 USB 2.0/1.1 por ts
• 1 IEEE 1394 port
English
865pe infinity 74740410 2.pmd 3/15/2004, 8:35 AM19
19
Page 20
2
English
English
• 1 RJ45 LAN port
• 2 S/PDIF RCA jacks (S/PDIF-in and S/PDIF-out)
• 3 audio jacks: line-out, line-in and mic-in
• 2 audio jacks for center/bass and rear out
I/O Connectors
• 2 connectors for 4 additional external USB 2.0/1.1 ports
• 2 connectors for 2 external IEEE 1394 ports
• 1 front audio connector for external line-out and mic-in jacks
• 1 connector for an external game/MIDI port
• 2 internal audio connectors (CD-in and AUX-in)
• 1 S/PDIF connector for optical cable connection
• 1 connector for IrDA interface
• 4 Serial ATA connectors
• 2 IDE connectors
• 1 floppy connector
• 2 ATX power connectors (20-pin and 4-pin 12V)
• 1 Wake-On-LAN connector
• 1 opened chassis alarm connector
• CPU fan, chassis fan and 2nd fan connectors
Expansion Slots
1 AGP slot
5 PCI slots
Compatibility
PCI 2.2 and AC ’97 compliant
Intel AGP version 3.0
2.2 CMOS Reloaded
CMOS Reloaded is a technology that allows storing multiple user-defined configurations by using the BIOS utility to save, load and name the configurations. This is especially useful to overclockers who require saving a variety of overclocked con­figurations and being able to conveniently switch between these configurations simultaneously. Select CMOS Reloaded in the main menu of the Award BIOS then press <Enter>.
You can save up to 4 configurations - in the “User Define Config 1” to “User Define Config 4” fields.
20
865pe infinity 74740410 2.pmd 3/15/2004, 8:35 AM20
Page 21
English
2
Saving a Configuration
After you have made the proper settings, move the cursor to “Backup” of “User Define Config 1” then press <Enter>.
Restoring a Configuration
To restore one of the previously saved configurations, move the cursor to “Load” of “User Define Config 1” then press <Enter>.
Renaming a Configuration
The default name given in the “User Define Config 1” field is “Config 1”. To rename, move the cursor to “Rename” then press <Enter>. You can enter up to 16 characters.
To save another configuration, repeat the procedures above but this time, in the “User Define Config 2” field.
2.3 Super Patch
Super Patch is a memor y acceleration technology that performs direct data transfer between the CPU and system memory. This significantly shortens latency time and provides improved system performance.
English
865pe infinity 74740410 2.pmd 3/15/2004, 8:35 AM21
21
Page 22
2
English
English
2.4 Package Checklist
The system board package contains the following items:
The system boardA user’s manualTwo Serial ATA data cablesOne IDE cables for ATA/33, ATA/66 or ATA/100 IDE drivesOne 34-pin floppy disk drive cableOne I/O shieldOne “Mainboard Utility” CDOne “Silicon Image Sil3112A RAID Drivers” disketteOne card-edge bracket mounted with a game/MIDI port
(optional)
If any of these items are missing or damaged, please contact your dealer or sales representative for assistance.
22
865pe infinity 74740410 2.pmd 3/15/2004, 8:35 AM22
Page 23
Chapter 3 - Français
3.1 Caractéristiques et Spécifications
Processeur
®
• Les processeurs Intel supporte jusqu’à 3.2GHz+
- Intel Hyper-Threading Technologie
- FSB: 533MHz et 800MHz
• Processeur Intel
- 400MHz vitesse du bus
Chipset
®
865PE chipset
• Intel
Mémoire Système
• 4 sockets DDR SDRAM DIMM 184 broches
• Suppor t d’interface de la mémoire à deux canaux (128-bit)
• Suppor t de 4GB de mémoire système
• Opération synchrone avec le bus système du processeur
• Suppor t des barrettes DIMM ECC/non-ECC
• Support des barrettes DIMM sans tampon
®
865PE (MCH)
- Intel
®
- Intel
82801EB (ICH5)
- Chaque canal supporte 2 sockets DIMM
- PC2100/PC2700/PC3200 (DDR266/DDR333/DDR400)
avec un processeur à 800MHz de FSB. La DDR333 peut marcher à 320MHz de fréquence de mémoire si utilisée avec un processeur à 800MHz de FSB.
- Utilisez la PC2100/PC2700 (DDR266/DDR333) avec un
processeur à 533MHz de FSB
- Utilisez la PC2100 (DDR266) avec un processeur à
400MHz de FSB
Pentium® 4 (Prescott et Northwood)
®
Celeron
®
Français
3
Français
865pe infinity 74740410 3.pmd 3/15/2004, 8:35 AM23
23
Page 24
3
Français
Français
BIOS
®
• Compatible avec Award BIOS, Windows Plug and Play
Genie BIOS:
- Overclocking de CPU/DRAM
- Overclocking de AGP/PCI/SATA
- Contrôle du voltage de CPU/DIMM/AGP
• Suppor te l’amorçage séquentiel SCSI
• Suppor te la fonction DMI 2.0
• Mémoire Flash 4Mbit
Design à Haut Rendement Énergétique
• ACPI STR (Suspend to RAM) fonction
• Réveil-Sur-PS/2 Clavier/Souris
• Eveil Clavier USB
• Eveil Sonnerie
• Réveil Par Le Réseau
• Minuterie RTC pour allumer le système
• Récupération après Défaillance d’Alimentation CA
System Health Monitor Fonctions
• Gère l’alarme de température et de surchauffe de CPU/ système
• Gère l’alarme de voltage et d’échec de CPU/1.5V/5VSB/VBAT/
3.3V/5V/±12V
• Gère la vitesse de ventilateur du ventilateur de CPU, chassis et second; et alarme de défaillance.
• Contrôle automatique de ventilateur de chassis/second et marche/arrêt de ventilateur
• Capacité de relecture qui affiche la température, le voltage et la vitesse de ventilateur
• Alarme de châssis ouvert
Caractéristiques Audio sur Carte
98SE/2000/ME/XP
Français
• Codec full-duplex 20 bits stéréo avec fréquence d’échantillonnage variable indépendante
• Entrée CD différentielle de haute qualité
• Sor ties de niveau de lignes stéréo vraies
24
865pe infinity 74740410 3.pmd 3/15/2004, 8:35 AM24
Page 25
Français
• Interface entrée/sortie S/PDIF
• Sortie audio 6-canaux
Fonctionnalités Onboard Gigabit LAN PCI
• Utilise le contrôleur Realtek RTL8110S Gigabit LAN PCI
• Fonctions de gestion d’alimentation intégrées
• Suppor t Full duplex à 10, 100 et 1000 Mbps
• Suppor te l’auto négociation IEEE 802.3u
• Suppor t câble pour la gestion
Interface SATA IDE/RAID
• Silicon Image Sil3112A PCI - Serial ATA contrôleur
• Deux interfaces SATA (Serial ATA) compatibles avec la spécification SATA 1.0 (interface1.5Gbps)
• Support RAID 0 et 1
Interface IEEE 1394
• VIA VT6306 PCI 1394 contrôleur
• Supporte trois ports 100/200/400 Mb/séc
Contrôleur IDE de BUS Maître PCI
• Suppor te des disques durs ATA/33, ATA/66 et ATA/100
• IDE Améliorés Mode 4 PIO (vitesse de transfert de données allant jusqu’à 14Mo/sec.)
• La gestion de Bus réduit l’utilisation du CPU pendant les transferts sur disque
• Suppor te les CD-ROM ATAPI, LS-120 et ZIP
Socket Processeur
3
Français
• Socket 478
AGP (Accelerated Graphics Port)
• Soutien des spécifications AGP 3.0 (AGP 4x et 8x) et AGP 2.0 (AGP 1x et 4x)
• Soutien des cartes supplémentaires 1.5V AGP 8x (2.13GB par seconde) et AGP 4x (1066MB par seconde). Les car tes AGP 2x et 3.3V AGP ne sont pas soutenues.
865pe infinity 74740410 3.pmd 3/15/2004, 8:35 AM25
25
Page 26
3
Français
Français
Le Panneau des Ports Entrée/Sortie en Arrière
• 1 por t souris PS/2
• 1 port clavier PS/2
• 1 port de DB-9 série
• 1 por t parallèle DB-25
• 4 por ts USB 2.0/1.1
• 1 IEEE 1394 port
• 1 port RJ45 LAN
• 2 S/PDIF RCA prises (S/PDIF-in et S/PDIF-out)
• 3 prises audio: line-out, line-in et mic-in
• 2 prises audio: center/bass et rear out
Connecteurs Entrée/Sortie
• 2 connecteurs pour 4 ports USB 2.0/1.1 supplémentaires
• 2 connecteurs pour 2 IEEE 1394 externe
• 1 connecteur audio de l’avant pour la sortie ligne et l’entrée micro
• 1 connecteur pour 1 game/MIDI externe
•2 connecteurs CD-in et AUX-in audio internes
• 1 S/PDIF l’assemblage pour l’adjonction de câble optique
• 1 connecteur pour interface IrDA
4 connecteurs Serial ATA
• 2 connecteurs IDE
• 1 connecteur de lecteur de disquettes
• 2 connecteurs d’alimentation ATX
• 1 connecteur Wake-On-LAN
• Connecteur d’alarme de châssis ouvert
• Connecteurs de ventilateurs de CPU, de châssis et de second ventilateur
Français
Logements d’Extension
• 1 slot AGP
• 5 slots PCI
Compatibilité
• Compatible PCI 2.2 et AC’97
• Intel AGP version 3.0
26
865pe infinity 74740410 3.pmd 3/15/2004, 8:35 AM26
Page 27
3.2 CMOS Reloaded
CMOS Reloaded permet de sauvegarder de plusieures configura­tions de BIOS définies par l’utilisateur et de les charger et renommer. Cette fonction est très utile aux overclockeurs, qui ont besoin de sauvegarder des configurations différentes et de les commuter rapidement. Choisissez CMOS Reloaded dans le menu principal de Award BIOS et pressez <Enter>.
Vous pouvez garder pas plus de 4 configurations – dans “User Define Config 1” jusqu’à “User Define Config 4”.
La Conservation de la Configuration
Après finir tout installation necessaire, passez sur “Backup” dans “User Define Config 1” et pressez <Enter>.
Français
3
Français
La Restitution de la Configuration
Pour restituer les configurations gardees passez sur “Load” dans “User Define Config 1” et pressez <Enter>.
Le Changement de Nom de la Configuration
Le système donne le nom “Config 1” à ce qu’on a gardé dans “User Define Config 1”. Pour changer le nom de ce que vous gardez passez sur “Rename” et pressez <Enter>. Vous pouvez introduire jusqu’aux 16 symboles.
865pe infinity 74740410 3.pmd 3/15/2004, 8:35 AM27
27
Page 28
3
Français
3.3 Super Patch
Pour garder la seconde configuration il faut répéter les proce­dures si-dessus mais cette fois dans “User Define Config 2”.
Super Patch sert à accélérer le travail de la mémoire qui gère le flux de données entre la CPU et la mémoire système. Ça diminue considérablement le temps de retard et augmente la performance du système.
3.4 Liste de Vérification de l’Emballage
L’emballage de la carte système contient les éléments suivants:
1 carte système1 manuel utilisateur2 câble série ATA1 câble IDE pour les lecteurs IDE ATA/33, ATA/66 ou ATA/
100
1 câble 34 broches pour lecteur de disquette1 shield I/O1 CD “Mainboard Utility”
Français
1 disquette “Silicon Image Sil3112A RAID Drivers”1 bracket avec un port game/MIDI (optionnel)
Si l’un de ces éléments n’était pas dans l’emballage ou s’il était endommagé, veuillez contacter votre revendeur ou votre représentant.
Français
28
865pe infinity 74740410 3.pmd 3/15/2004, 8:35 AM28
Page 29
Chapter 4 - Deutsch
4.1 Leistungsmerkmale und Technische Daten
Prozessor
®
• Intel
• Intel
Chipsatz
• Intel
Systemspeicher
• 4 DDR-SDRAM-DIMM- Fassungen mit 184poligem
• Unterstützt 2-Kanal (128-bit breit) Speicherschnittstellen
• Unterstützt bis zu 4GB Systemspeicher
• Synchroner Betrieb mit dem Prozessor Systembus
• Unterstützt ECC/non-ECC DIMM
• Unterstützt ungepufferte DIMMs
Pentium® 4 Prozessor (Prescott und Northwood)
unterstützt bis zu 3.2GHz+
- Intel Hyper-Threading Technologie
- FSB: 533MHz und 800MHz
®
Celeron® Prozessor
- 400MHz Systemdatenbus
®
865PE chipsatz
®
865PE (MCH)
- Intel
®
- Intel
82801EB (ICH5)
Anschlußstecker
- Jeder Kanal unterstützt 2 DIMM Steckplätze
- PC2100/PC2700/PC3200 (DDR266/DDR333/DDR400) mit 800MHz FSB CPU. Im Betrieb mit einer 800 MHz FSB CPU arbeitet DDR333-Speicher mit einer Speichertaktfrequenz von 320 MHz.
- Verwenden Sie PC2100/PC2700 (DDR266/DDR333) Speicher mit 533MHz FSB CPU’s.
- Verwenden Sie PC2100 (DDR266) Speicher mit 400MHz FSB CPU’s.
Deutsch
4
Deutsch
865pe infinity 74740410 4.pmd 3/15/2004, 8:35 AM29
29
Page 30
4
Deutsch
Deutsch
BIOS
®
• Kompatibilität mit Award BIOS, Windows Plug and Play
Genie BIOS:
- CPU/DRAM Übertaktung
- AGP/PCI/SATA Übertaktung
- CPU/DIMM/AGP Überspannung
• Unterstützung des sequentiellen SCSI-Ladens
• Unterstützung der DMI-2.0-Funktion
• Flash-Speicher (4Mbit)
Energomisches Design
• ACPI STR (Suspend to RAM) funktion
• Wecken bei Betätigung der PS/2 Tastatur/Maus
• Wecken bei USB-Tastatur
• Wecken bei Klingeln
• Wecken des Systems durch das Netzwerk
• RTC-Taktgeber zum Einschalten des Systems
• Wiederherstellung der Wechselstromversorgung nach einem Ausfall
System Health Monitor Funktions
• Überwachung der Temperatur des CPU/Systems sowie Warnsignal bei Überhitzung
• Überwachung der Spannungen des CPU/1.5V/5VSB/VBAT/3.3V/ 5V/±12V sowie Warnsignal bei Ausfall
• Überwachung der Geschwindigkeit des CPU-Ventilators, Chas­sis-Ventilators und Second-Ventilators und sendet ein Warnsignal bei einem Ausfall aus
• Automatisches des Chassis-Ventilators und Second-Ventilators Ein-/Ausschalten des Ventilators
• Anzeige der Temperatur, Spannung und Geschwindigkeit des Ventilators
• Warnignal bei geöffneter Chassis
98SE/2000/ME/XP
Français
30
865pe infinity 74740410 4.pmd 3/15/2004, 8:35 AM30
Page 31
Deutsch
Audiomerkmale auf Platine
• 20-Bit-Stereo-Vollduplex-Codec mit unabhängiger und variabler Abtastfrequenz
• Hochwer tige CD-Differential-Eingabe
• Naturgetreue Stereo-Leitungspegel-Ausgabe
• S/PDIF-In/Aus-Schnittstelle
• 6-Kanal-Audioausgang
Merkmale des Gigabit LAN PCI auf Platine
• Benutzung des Realtek RTL8110S Gigabit LAN PCI
• Integrierte Power-Management-Funktionen
• Vollduplex-Unterstützung bei 10, 100 und 1000 Mbps
• Unterstützung der IEEE-802.3u-Auto-Negotiation
• Unterstützung des Leiters für das Management
SATA IDE/RAID Schnittstelle
• Benutzung des Silicon Image Sil3112A
Zwei SATA (Serial ATA) Schnittstellen, die der SATA 1.0 Spezifikation (1.5Gbps interface) entsprechen
• Unterstützt RAID 0 und 1
Interface IEEE 1394
• Benutzung des VIA VT6306 PCI 1394
• Uunterstützt drei Ports 100/200/400 Mbps
PCI-Bus-Master-IDE-Controller
• Unterstützung der Festplatten ATA/33, ATA/66 und ATA/100
• Erweitertes IDE des PIO-Modus 4 (Datenübertragungsgesch­windigkeit von bis zu 14MB/Sek.)
• Verminderte CPU-Benutzung während Diskettenübertragung dank dem Bus-Master.
• Unterstützung des ATAPI CD-ROMs, LS-120 und ZIP.
4
Deutsch
Prozessor Socket
• Buchse 478
865pe infinity 74740410 4.pmd 3/15/2004, 8:35 AM31
31
Page 32
4
Deutsch
Deutsch
AGP (Accelerated Graphics Port)
• Unterstützt AGP 3.0 (AGP 4x und 8x) und AGP 2.0 (AGP 1x und 4x) Spezifikationen
• Unterstützt 1.5V AGP 8x (2.13GB/sek.) und AGP 4x (1066MB/ sek.) Erweiterungskarten. AGP 2x und 3.3V AGP Karten werden nicht unterstützt.
Ein-/Ausgabe-Porte an der Rückwand
• 1 Anschluß für eine PS/2-Maus
• 1 Anschluß für eine PS/2-Tastatur
• 1 serieller DB-9-Anschlüsse
• 1 DB-25-Parallelanschluß
• 4 USB 2.0/1.1-Anschlüsse
• 1 IEEE 1394-Anschlüsse
• 1 RJ45 LAN-Anschlüsse
• 2 S/PDIF RCA-Anschlüsse (S/PDIF-in und S/PDIF-out)
• 3 Audio-Anschlußbuchsen: line-out, line-in und mic-in
• 2 Audio-Anschlußbuchsen: center/bass und rear out
Ein-/Ausgabe-Steckverbinder
•2 Anschlußfassung für 4 zusätzliche externe USB 2.0/1.1­Anschlüsse
• 2 Anschluß für 2 externe IEEE 1394 Schnittstelle
1 Frontaudioanschluß für die externe Ausgangsleitung und den Mikrofoneingang
• 1 Anschluß für eine externe game/MIDI Schnittstelle
• 2 interne Audioanschlüsse (CD-in und AUX-in)
• 1 S/PDIF Anschluß für die Verbindung des optischen Kabel
• 1 Anschluß für die IrDA-Schnittstelle
• 4 Serial-ATA-Anschlüsse
• 2 IDE-Anschlüsse
• 1 Floppy-Anschlüsse
• 2 Anschlußstecker für das ATX-Netzgerät
• 1 Anschlußstecker für Wecken durch LAN
• 1 Anschluß für akustische Warnsignale bei geöffneter Chassis
• CPU-, Chassis- und Second-ventilator-Anschlüsse.
Français
32
865pe infinity 74740410 4.pmd 3/15/2004, 8:35 AM32
Page 33
Erweiterungssteckfasssungen
• 1 AGP-Einbauplätzen
• 5 PCI-Einbauplätzen
Kompatibilität
• Kompatibilität mit PCI 2.2 und AC’97
• Intel AGP, version 3.0
4.2 CMOS Reloaded
Die Technologie CMOS Reloaded läßt etliche Konfigurationen des Nutzers mit Hilfe von BIOS utility bewahren. Sie kann man auch gespeichert und umbenennt werden. Das ist sehr nützlich für die Overclockers, die einige verschiedene Konfigurationen bewahren und sie operativ umschalten müssen. Wählen Sie “CMOS Re­loaded” im Award BIOS Hauptmenü, und drüken Sie <Enter>. Sie können bis 4 Konfigurationen im Feld “User Define Config 1“ von bis zu “User Define Config 4“ behalten.
Deutsch
4
Die Erhaltung der Konfiguration
Nachdem Sie alle notwendigen Installationen beendet haben, verlagern Sie den Cursor auf “Backup” in “User Define Config 1“ und drücken Sie <Enter>.
Die Wiederaufbau der Konfiguration
Um die früher aufgesparten Konfigurationen wiederaufzubauen, verlagern Sie den Cursor auf “Load” in “User Define Config 1” und drücken Sie <Enter>.
865pe infinity 74740410 4.pmd 3/15/2004, 8:35 AM33
Deutsch
33
Page 34
4
Deutsch
Die Umbenennung der Konfiguration
Im Verschweigen wird die Erhaltung im Feld “User Define Config 1” als “Config 1”. Um die Erhaltung umzubenennen, verlagern Sie den Cursor auf “Rename” und drücken Sie <Enter>. Sie können bis 16 Symbols einsetzen.
Für die Erhaltung der zweiten Konfiguration muß man die beschriebenen Prozeduren wiederholen, aber, diesmal, im Feld “User Define Config 2“.
4.3 Super Patch
Die Technologie Super Patch bestimmt für die Beschleunigung der Speicherarbeit, die den Datenfluß zwischen dem zentralen Prozessor und dem Systemspeicher verarbeitet. Das verringert die Zeit der Verzögerung in bedeutendem Maße und verbessert die Schnellwirkung des Systems.
4.4 Verpackungsliste
In der Verpackung der Systemplatine sind folgende Ar tikel enthalten:
1 Systemplatine1 Benutzerhandbuch2 serial-ATA-Kabel1 IDE-Kabel für ATA/33-IDE-Laufwerke, ATA/66-IDE-Laufwerke
oder ATA/100-IDE-Laufwerke
1 Floppylaufwerkskabel mit 34poligen Anschlußstecker
Deutsch
1 shield I/O1 CD mit “Mainboard Utility”1 Diskette “Silicon Image Sil3112A RAID Drivers”1 Bracket mit einem Game/MIDI Port (zur Option)
Fehlt einer dieser Artikel oder weist einer dieser Artikel Beschädigungen auf, wenden Sie sich an Ihren Händler oder Vertreter.
Français
34
865pe infinity 74740410 4.pmd 3/15/2004, 8:35 AM34
Page 35
Chapter 5 - Español
5.1 Características y Especificaciones
Procesador
®
• Procesador Intel de 3.2GHz+
- Intel Hyper-Threading Tecnología
- FSB: 533MHz y 800MHz
• Procesador Intel
- 400MHz canal de datos del sistema
Chipset
®
865PE chipset
• Intel
Memoria de Sistema
• 4 zocalos 184-pin DDR SDRAM DIMM
• Se soporta el interfaz de dos canales (128-bites)
• Se soporta 4GB de la memoria
• La operacion sincronica ñon el bus del sistema del
• Sopor ta la memoria ECC/non-ECC DIMM
• Soporta modulos inseparados DIMM
®
- Intel
®
- Intel
- Cada canal se sopor ta por 2 eslots DIMM
procesador
- PC2100/PC2700/PC3200 (DDR266/DDR333/DDR400) ñon
el procesador en el bus de 800MHz. DDR333 va a funcionar en la frecuencia de 320MHz usando el procesador con el bus 800MHz.
- Use Ud. PC2100/PC2700 (DDR266/DDR333) ñon el
procesador en el bus de 533MHz
- Uså PC2100 (DDR266) con procesador en el bus de
400MHz
Pentium® 4 (Prescott y Northwood) máximo
®
865PE (MCH) 82801EB (ICH5)
Celeron
®
Español
5
865pe infinity 74740410 5.pmd 3/15/2004, 8:35 AM35
Español
35
Page 36
5
Español
BIOS
®
• Award BIOS, Windows compatible
Genie BIOS:
- El impulso del procesador/DRAM
- El impulso AGP/PCI/SATA
- La instalacion de la tension del procesador/DIMM/AGP
• Sopor ta el incio de secuencia de SCSI
• Sopor ta la función de DMI 2.0
• Memoria Instante (4Mbitios)
Diseño Energia Eficiente
• ACPI STR (Suspend to RAM) función
• PS/2 Teclado/Ratón de Wake-On
• Teclado de Wake-On-USB
• Wake-On-Ring
• Wake-On-LAN
• Temporizador de RTC para encender el sistema
• Recuperación de Fracaso de Energía AC
Funciones de Monitor de Salud del Sistema
• Monitores de los CPU/sistema temperaturas y alarma acalorada.
• Monitores de voltajes de CPU/1.5V/5VSB/VBAT/3.3V/5V/±12V y alarma de fracaso.
• Vigila la velocidad del abanico del abanido del CPU, abanido del chassis y abanico de second; y alarma de fracaso.
• Control abanido del chassis y abanico de second encendido/ apagado del abanico automático.
• Capacidad de Leer hacia atrás que presenta la temperatura, voltaje y velocidad de abanico.
• Alarma de chasis abierto
98SE/2000/ME/XP Enchufar y Usar
Características de Audio En Tablero
• Codec dúplex completo estéreo de 20-bit con independiente
Español
frecuencia de muestreo variable
• Alta calidad de entrada de CD diferencial
• Auténtico salidas de nivel de línea estéreo
36
865pe infinity 74740410 5.pmd 3/15/2004, 8:35 AM36
Page 37
Español
• Interfáz de S/PDIF-in/out
• Output auricular de 6-canal
Características de Gigabit LAN PCI Interno
• Utiliza el rápido controlador Realtek RTL8110S Gigabit LAN
• Funciones de administración de energía integrado
• Sopor te dúplex completo en ambos 10, 100 y 1000 Mbps
• Sopor ta auto negociación de IEEE 802.3u
• Sopor ta alambre para la administración
El Inerfaz SATA IDE/RAID
• Silicon Image Sil3112A controlador
Dos interfaces SATA (Serial ATA) son obedientes con la
especificacion SATA 1.0 (el interfaz 1.5Gbps)
• Se soporta RAID 0 y 1
Interface IEEE 1394
• VIA VT6306 PCI 1394 controlador
• Soporta tres ports 100/200/400 Má/sec
Controlador de IDE Maestro de Bus PCI
• Soporta las unidades duras de ATA/33, ATA/66 y ATA/100
• PIO Modo 4 Realzada IDE (tasa de transferencia de dato hasta 14MB/seg.)
• Controlación de Bus reduce la utilización de CPU durante la trasferencia de disco
• Sopor ta ATAPI CD-ROM, LS-120 y ZIP
Procesador Zócalo
5
• Zócalo 478
AGP (Accelerated Graphics Port)
• Sopor ta especificaciones AGP 3.0 y AGP 2.0
• Soporta placas 1.5V AGP 8x (2.13Gb/seg.) è AGP 4x (1066Mb/seg.). Tarjetas AGP, AGP 2x y 3.3V no se soportan.
865pe infinity 74740410 5.pmd 3/15/2004, 8:35 AM37
Español
37
Page 38
5
Español
Panel de reverso de conectores de entrada - Salida
• 1 puer to de ratón PS/2
• 1 puerto de teclado PS/2
• 1 puer to de serie DB-9
• 1 puer to paralelo de DB-25
• 4 puer tos de USB 2.0/1.1
• 1 puer to de IEEE 1394
• 1 puerto de RJ45 LAN
• 2 enchufes de S/PDIF RCA (S/PDIF-in y S/PDIF-out)
• 3 enchufes de audio: line-out, line-in y mic-in
• 2 enchufes de audio: center/bass y rear out
I/O Conectores
• 2 conectores para 4 puertos de USB 2.0/1.1 externo adicional
• 2 conectores para 2 puertos de IEEE 1394 externa
• 1 conectador audio delantero para la salida extrema de linea y el micro
• 1 conector para un puerto de game/MIDI externa
• 2 conectores de CD-in y AUX-in audio interno
• 1 S/PDIF mortaja para conección de cable óptico
• 1 conector para interfaz de IrDA
• 4 conectores de Serial ATA
• 2 conectores de IDE
• 1 conector de disquete
• 2 conectores de fuente de alimentación de ATX
• 1 conector de Wake-On-LAN
• 1 conector de alarma de chasis abierto
• 3 conectores de abanicos de CPU, chasis y second
Ranuras de Expansión
1 slot AGP
5 slots PCI
Compatibilidad
• Sumisión de PCI 2.2 y AC’97
• Versión 3.0 de Intel AGP
Español
38
865pe infinity 74740410 5.pmd 3/15/2004, 8:35 AM38
Page 39
5.2 CMOS Reloaded
La tecnología CMOS Reloaded permite conservar unos configuraciones de usuario con ayuda de utilita BIOS y también cargarlas y cambiarlas de nombre. Es extremadamente necesario para overclokers quienes necesitan conservar diferentes configuraciones y pasar entre ellas operativamente. Opte CMOS Reloaded en menú principal de Award BIOS y aprete <Enter>.
Vd puede conservar hasta 4 configuraciones – en los campos “User Define Config 1” hasta “User Define Config 4”.
Conservación de Configuración
Después de realizar todos instalaciones necesarias mueva el cur­sor al “Backup” en “User Define Config 1” y aprete <Enter>.
Reconstitución de Configuración
Español
5
Para reconstituir las configuraciónes conservadas antes mueva el cursor al “Load” en “User Define Config 1” y aprete <Enter>.
Cambio de nombre de Configuración
Configuraciones conservadas se nombran automáticamente “Config 1” en el campo “User Define Config 1”. Para cambiar de nombre la configuración mueva el cursor al “Rename” y aprete <Enter>. Vd puede entrar hasta 16 símbolos.
865pe infinity 74740410 5.pmd 3/15/2004, 8:35 AM39
Español
39
Page 40
5
Español
Para conservar otra configuración repita los procedimientos descritos antes, pero en el campo “User Define Config 2”.
5.3 Super Patch
La tecnología Super Patch está predestinada para activar el trabajo de la memoria que procesa torrente de los datos entre el procesador central y la memoria sistémica. Esta permite reducir considerablemente el plazo de demora y mejorar velocidad del sistema.
5.4 Lista de Chequeo del Paquete
El paquete del tablero de sistema contiene los siguientes artículos:
1 tablero de sistema1 manual de usuario2 cable serial ATA1 cable de IDE para las unidades de ATA/33, ATA/66 o
ATA/100 IDE
1 cable de unidad de disquete de 34-terminales1 la proteccion I/O1 CD de “Mainboard Utility”1 disquette flojo “Silicon Image Sil3112A RAID Drivers”1 placa con 1 puer to game/MIDI (opcional)
Si cualquieres de estos ar tículos están perdidos o dañados, favor de ponerse en contacto con su tratante o representantes de venta para la asistencia.
Español
40
865pe infinity 74740410 5.pmd 3/15/2004, 8:35 AM40
Page 41
Глава 6 - Русский язык
6.1 Характеристики и свойства
Процессор
®
• Процессор Intel Поддержка до 3.2GHz+
- Intel технологией Hyper-Threading
- FSB: 533MHz è 800MHz
• Процессор Intel
- 400MHz системная шина
Чипсет
®
• Intel
Оперативная Память
• 4 184-pin DDR SDRAM DIMM
• Поддерживает двухканальный (128-битного)
• Поддерживает 4Гб оперативной памяти
• Синхронная операция с системной шиной
• Поддерживает память ECC/non-ECC DIMM
• Поддерживает небуффер. модули DIMM
865PE chipset
®
- Intel
- Intel
интерфейс
- Каждый канал поддерживает 2 DIMM слота
процессора
- PC2100/PC2700/PC3200 (DDR266/DDR333/
- Используйте PC2100/PC2700 (DDR266/DDR333) с
- Используйте PC2100 (DDR266) с процессором на
865PE (MCH)
®
82801EB (ICH5)
DDR400) с процессором на шине 800MГц. DDR333 будет работать на частоте 320MГц при использовании процессора на шине 800MГц.
процессором на шине 533MГц
øèíå 400MÃö
Pentium® 4 (Prescott è Northwood)
®
Celeron
®
Русский
6
Русский
865pe infinity 74740410 6.pmd 3/15/2004, 8:35 AM41
41
Page 42
6
Русский
Русский
BIOS
®
• Award BIOS, Windows
• Genie BIOS:
- Разгон Процессора/DRAM
- Разгон AGP/PCI/SATA
- Установка напряжения Процессора/DIMM/AGP
• Поддерживает загрузку SCSI
• Поддерживает функцию DMI 2.0
• 4Mbit Flash Память
Энергомичный Дизайн
• ACPI STR (Suspend to RAM)
• Активизация На Движение Мыши
• Активизация На Нажатие Кнопки USB Клавиатуры
• Активизация На Входящий Звонок
• Активизация На Сетевое Событие
• RTC Таймер для Включения Системы
• Скачки Напряжения
Функции Мониторинга Состояния Системы
• Mониторинг температуры процессора/системы
• Mониторинг напряжений CPU/1.5V/5VSB/VBAT/3.3V/ 5V/±12V
• Mониторинг скорости вращения вентилятора CPU/ chassis/second
• Автоматическое управление chassis/second вентилятора системы
• Отображение температуры, напряжения и скорости работы вентилятора
• Сигнализация открытого корпуса
98SE/2000/ME/XP Plug and Play
Встроенный Звук
• Полнодуплексный 20-битный стерео кодек с независимым изменением частоты сжатия
• Высококачественный дифференциальный CD вход
• Настоящий линейный стерео выход
• интерфейса S/PDIF-in и S/PDIF-out
• 6-и канальный звуковой выход
42
865pe infinity 74740410 6.pmd 3/15/2004, 8:35 AM42
Page 43
Русский
Встроенные сетевые функции
• Быстрый контроллер Realtek RTL8110S Gigabit LAN PCI
• Встроенные функции управления питанием
• Полнодуплексная поддержка на 10, 100 и 1000 Mbps
• Поддерживает IEEE 802.3u auto-negotiation
• Работа через шнур управления
Интерфейс SATA IDE/RAID
• Silicon Image Sil3112A
• Два интерфейса SATA (Serial ATA) совместимы со спецификацией SATA 1.0 (интерфейс 1.5Gbps)
• Поддерживает RAID 0 и 1
Интерфейс IEEE 1394
• VIA VT6306 PCI 1394
• Поддерживает три порта 100/200/400 Mб/сек
Контроллер PCI IDE Мастер Шины
• Поддерживает жесткие диски ATA/33, ATA/66 и ATA/ 100
• PIO Mode 4 Расширенный IDE (скорость передачи данных до 14МБ/сек.)
• Мастеринг шины снижает нагрузку на центральный процессор
• Поддерживает ATAPI CD-ROM, LS-120 и ZIP
6
Русский
Чипсет Socket
• Socket 478
AGP (Accelerated Graphics Port)
• Поддерживает спецификации AGP 3.0 (AGP 4x и 8x) и AGP 2.0 (AGP 1x и 4x)
• Поддерживает карты 1.5V AGP 8x (2.13Гб/сек.) и AGP 4x (1066Mб/сек.). AGP карты AGP 2x и 3.3V не поддерживаются.
865pe infinity 74740410 6.pmd 3/15/2004, 8:35 AM43
43
Page 44
6
Русский
Русский
Порты Ввода/Вывода (I/O) задней панели
• 1 PS/2 ïîðò äëÿ ìûøè
• 1 PS/2 порт для клавиатуры
• 1 внешнего DB-9 порта
• 1 внешнего DB-25 параллельный порт
• 4 USB 2.0/1.1 порта
• 1 IEEE 1394 ïîðò
• 1 RJ45 LAN ïîðò
• 2 S/PDIF RCA звука (S/PDIF-in и S/PDIF-out)
• 3 гнезда для звука: выход, вход и микрофон
• 2 гнезда для звука: center/bass и rear out
Разъемы Ввода/Вывода
• 2 разъем для 4-х дополнительных внешних USB 2.0/
1.1 портов
• 2 разъем для внешнего IEEE 1394 порта
• 1 передний аудио разъем для внешнего линейного выхода и микрофона
• 1 разъем для внешнего game/MIDI порта
• 2 внутренних звуковых разъема (CD-in и AUX-in)
• 1 S/PDIF разъем для присоединения оптического кабеля
• 1 разъем для интерфейса IrDA
• 4 Serial ATA разъема
• 2 IDE разъема
• 1 разъем для подключения двух дисководов до
2.88Má
• 2 разъема питания ATX
• 1 Wake-On-LAN (Активизация на сетевое событие)
• 1 Сигнализация открытого корпуса разъема
• Разъемы для вентилятора процессора, системного блока и корпуса
Слоты
• 1 AGP слотов
• 5 PCI слотов
44
865pe infinity 74740410 6.pmd 3/15/2004, 8:35 AM44
Page 45
Совместимость
• PCI 2.2 è AC ’97
• Intel AGP версии 3.0
Русский
6
6.2 CMOS Reloaded
Технология CMOS Reloaded позволяет сохранять несколько конфигураций пользователя с помощью утилиты BIOS, а также загружать и переименовывать их. Это крайне полезно оверклокерам, которым требуется сохранять несколько разнообразных конфигураций и оперативно переключаться между ними. Выберите CMOS Reloaded в главном меню Award BIOS и нажмите <Enter>.
Вы можете сохранить до 4 конфигураций – в поле “User Define Config 1” до “User Define Config 4”.
Сохранение Конфигурации
После того, как вы завершили все необходимые установки, переместите курсор на “Backup” в “User Define Config 1” и нажмите <Enter>.
Русский
Восстановление Конфигурации
Чтобы восстановить ранее сохраненные конфигурации, переместите курсор на “Load” в “User Define Config 1” и нажмите <Enter>.
865pe infinity 74740410 6.pmd 3/15/2004, 8:35 AM45
45
Page 46
6
Русский
Русский
Переименование Конфигурации
По умолчанию, сохранению в поле “User Define Config 1” дается имя “Config 1”. Чтобы переименовать сохранение, переместите курсор на “Rename” и нажмите <Enter>. Вы можете ввести до 16 символов.
Для сохранения второй конфигурации следует повторить описанные процедуры, но, на этот раз, в поле “User Define Config 2”.
6.3 Super Patch
Технология Super Patch предназначена для ускорения работы памяти, обрабатывающей поток данных между центральным процессором и системной памятью. Это значительно сокращает время задержки и улучшает быстродействие системы.
6.4 Комплектация
Комплектация поставки материнской платы:
Материнская платаРуководство пользователя2 шлейф Serial ATA1 IDE шлейф для жестких дисков ATA/33, ATA/66
èëè ATA/100
Один 34-pin шлейф для дисководаОдна защита I/OÎäèí CD ñ “Mainboard Utility”Одна дискета “Silicon Image Sil3112A RAID Drivers”
Задняя планка с game/MIDI порта (опционально)
Если в комплекте из этого чего-то не хватает или что­то испорчено, пожалуйста, свяжитесь со своим дилером или продавцом.
46
865pe infinity 74740410 6.pmd 3/15/2004, 8:35 AM46
Loading...