DFG ETitanWire Machine Instruction Manual

E Titan Wire 3:1

Heavy Duty Electric

Wire Binding Machine

Instruction Manual

Warning:

Do not connect this product to electrical power or attempt to operate it before you read
these operating instructions and have been fully trained to operate this product.

1. Indoor use only. Do not expose to rain.

2. Keep hands, long hair, neckties, necklaces and other loose articles away from
roller.

3. Do not place this product on an unstable stand, cart, or surface. The product may
fall and hurt you. If you use a cart, move the product and cart carefully.

4. Do not insert objects or spill liquids into the product. They may damage the unit,
or short out components that may result in fire.

5. The power outlet shall be installed near this product and shall be easily accessible.

6. Unplug the product before moving it. Unplug the power supply when it will not
be in use for an extended period of time.

7. Do not attempt to service this product. Contact DFG or your local dealer if you
need service.

8. In case you need to replace the fuse, please use 3.0-A fuse.

9. Do not operate machine when the cover is not on the machine.

This machine should only plug into 110 V single-phase power outlets. When
using the roller, some motor and roller noises are normal. Roller is tested to last
10,000+ binding cycles. We provide a limited one-year parts and labor warranty
for this machine.

1260 Kempar, Maidson Heights, MI 48071, U.S.A. Phone: [phone], Fax: [phone]

Email: [e-mail] Website: www.dfgus.com