DFG E-TitanComb Instruction Manual

Instruction Manual

Provided By

http://www.MyBinding.com

http://www.MyBindingBlog.com

DFG E-TitanComb

Heavy Duty

Binding Machine

EtitanComb Machine Operation Manual

For your safety:

1. Do not connect this product to electrical power or attempt to operate it before you
read these operating instructions and have been fully trained to operate this
product.

2. Follow the instructions and warnings on the machine and on this operation
manual

3. When lifting the machine, you should only lift from the bottom

4. Indoor use only. Do not expose to rain.

5. Keep hands, long hair, neckties, necklaces and other loose articles away from
moving parts

6. Do not place this product on an unstable stand, cart, or surface. The product may
fall and hurt you. If you use a cart, move the product and cart carefully.

7. Do not insert objects or spill liquids into the product. They may short out
components that may result in fire.

8. The power outlet shall be installed near this product and shall be easily accessible.

9. Unplug the product before moving it. Unplug the power supplier when it will not
be in use for an extended period of time.

10. Do not attempt to service this product. Contact DFG or your dealer if you need
service.

This machine should only plug into 110 V single-phase power outlets.

1. Insert foot pedal plug into foot
pedal socket

2. Connect power cord to machine
and power outlet (not shown)

1260 Kempar, Madison Heights, MI 48071, U.S.A. Phone: [phone], Fax: [phone]

Email: [e-mail] Website: www.dfgus.com

3. Turn on the power