EMPLOYEE OWNED
MADE IN THE U.S.A. • SINCE 1894
Dexter OPL T-300 Washer Specications Industrial 80lb Reversing
Dimensions / Capacity
Dry Weight Capacity 20 lb (9.0 kg)
Cabinet Height 43.9” (111.4 cm)
Cabinet Width 26” (66.0 cm)
Overall Depth 25.0” (63.5 cm)
Door Opening 12.25” (31.1cm)
Cylinder Diameter 21.0” (53.3 cm)
Cylinder Depth 13.5” (34.3 cm)
Cylinder Volume 2.7 cu.ft. (76.7 l)
Floor to Door Bottom 15.0” (38.1 cm)
Speeds G-Force (RPM)
High Speed Extract 100 G (579 RPM)
Intermed. Extract Speed 60 G (449 RPM)
Washing Speed .9 G (55 RPM)
Motor Size 1 HP (.75 KW)
SCVD60HMS-_ _
Water
Water inlet Size 3/4” (19mm)
Flow Rate (per min) 9 gal (34.1 L)
Pressure (min/max) 30-120 psi (207-827 Kpa)
Drain Diameter (O.D.) 2.25” (5.7 cm)
Floor to Center of Drain 6” (15.2 cm)
Electrical / Circuit Breaker / Running Amps / Wire Size
-10 (120/60/1) 20 amp / 13 amp / provided
-12 (208-240/60/1 - 2 wire + ground) 15 am p / 4 amp / #12
-12 (208-240/60/3 - 3 wire + ground) 15 am p / 4 amp / #12
-59 (230/50/1 - 2 wire + ground) 15 amp / 4 amp / 3.5 mm2
Installation Recommendations
Clearance Between Machines 1/2” (min) (1.3 cm)
Clearance Behind Machines 24” (min) (61.0 cm)
Concrete Thickness 6” (min) (15.2 cm)
Approvals**
Net Weight - lb (kg) 309 lbs (140.2 kg)
Shipping Dimensions:
Shipping Weight 337 lbs (152.9 kg)
Height - in (cm) 50.0” (53.5 cm)
Width - in (cm) 27.25” (69.2 cm)
Depth - in (cm) 30.5” (77.4 cm)
Front
Rev. 32 - 6/10/2013
Side Back
** Agency approvals may vary depending on conguration. Consult factory for details. For the most accurate information, please consult machine installation guide for
all design and construction purposes. Due to continuous product improvements, design and specications subject to change.
Part #0995-109-024
DEXTER
INDUSTRIAL T-300 WASHER
6 CYCLE ON-PREMISE WASHER MODEL
Dexter On-Premise Washers Are Designed, Tested
And Manufactured To Ensure Superior Performance
DEXTER T-300 OPL WASHER FEATURES:
RELIABLE DESIGN:
● Heavy-Duty Bearings In a Cast Iron Bearing Housing
● Welded Steel Spider And Shaft
● AISI 304 Stainless Steel Top, Front And Side Panels
● Fits Through a Standard 36” Doorway
● Sump-Less Outer Tub Design Saves Water On Every Cycle
● 10 Year Washer Warranty On The Frame, Tub, Cylinder, Shaft, Seals,
Bearings & Bearing Housing
● 3 Year Parts Warranty
PERFORMANCE FEATURES
● 100 G-Force Extraction
● 6 Programmable Wash Cycles Available
● Perforated Cylinders And Raised Bafes For Superior Wash Action
● Easy To Modify Cycle Times, Temperatures, Water Levels And
Injection Source
● Energy Efficient Inverter Drive Technology
● Rugged Frame Design Proven For Over Two Decades
● All Dexter Washer Designs Pass 1000 Hour Out of Balance Test
OPTIONS:
● Capacities Available: 20lb, 30lb, 40lb, 60lb And 80lb
Ask your Dexter Authorized Distributor For More Details!
www.dexter.com • 1- 800-524-2954