Dexin MWP177P6S User Manual

2.4GHz Wireless Optical Mouse

DC177-P6S & RX36_6S USER’S MANUAL Important Ergonomic Information
Some experts believe that using any mouse or trackball may cause serious injury to hands, wrists, arms, neck, or back. If you feel pain, numbness, or weakness in these areas, seek advice from a qualified health professional.
TO REDUCE THE RISK OF INJURY, FOLLOW THESE PRECAUTIONS:
and mouse so you do not have to reach.
Adjust your chair and keyboard so your upper arms and wrists are straight. Avoid resting your wrists on sharp edges.

System Requirements

Mouse compatible with standard Microsoft OS If your computer’s operating system is Windows 98/ 98SE, please prepare the
Windows98 or 98SE compact disk for system’s request during the installation.

Before you begin

Keep this manual for future reference! It contains Important Troubleshooting
Information.
Keep your old PS/2 or USB mouse as back-up devices.
Getting Started
Thank you for choosing the Wireless Optical Mouse. By using the advanced RF technology a 360° operation is possible and no line-of-sight is required between the receiver and the mouse. The mouse featured with 1,600 dpi high resolution will bring users the best operation accuracy and efficiency,
For travel, loss prevention and more power saving, the DC177-P6S is designed to store receiver in the cavity underneath the mouse. You can use the power on/off switch to save the power. The low power indicator on top of the mouse will blink to indicate battery low power. With numerous user-friendly functions and the compact and ergonomic design, the RF mouse may offer users the best experience of utilization and convenience in traveling.
DC177-P6S 2.4GHz Wireless Optical Mouse Page 1 of 7 1.0 Edition
Package Contains
Your DC177-P6S Mouse package includes the following:
1. The wireless optical mouse
2. USB RX36_6S receiver
3. User’s manual
4. 2 AAA alkaline batteries
NoteIf any part is missing, please contact your dealer for a replacement immediately.
Precaution
The optical mouse can not work on a glass or mirror surface. Avoid operating this mouse on a glossy surface; otherwise, this mouse may not operate normally.
For conservation of battery power, it is strongly recommended to operate an optical mouse on a bright surface with fine texture to obtain lower power consumption of the high illumination LED. A very dark surface will cause higher power consumption.
For optimal performance, mouse should be no more than 5M away from receiver.
For a better transmission distance, avoid using this device on a metal plate or desktop because a large surface of iron, aluminum, copper and other metal will act as a shield or ground to the RF antenna of the mouse and receiver. Operating on a metal surface may shorten the transmission distance.
If your notebook computer has a metal (contains Al or Mg) case, the metal housing of the LCD panel will isolate partial radiation of the RF signal from the mouse. This could possibly result in reducing the distance of transmission when you operate the mouse right in front of the notebook and when the receiver is connected on the back of the notebook. However, the RF mouse should work properly while you are operating the mouse just beside your desktop computer.
DC177-P6S 2.4GHz Wireless Optical Mouse Page 2 of 7 1.0 Edition
Overview
Button#1–LeftClickButton
Button #3 – Middle click Button & Scrolling wheel
Button #5 – Internet Forwards
Button #4 – Internet Backwards
Button#2–RightClickButton
LowPowerIndicator
DC177-P6S 2.4GHz Wireless Optical Mouse Page 3 of 7 1.0 Edition
Loading...
+ 4 hidden pages