DeWalt TRX400EX User Manual

* Cobra recommends you always wear a helmet while ridi
ng. Please never operate your motorcycle while under
the influence of alcohol and/or drugs. Enjoy the new look of your motorcycle and please ride safely.
1 - Swing Arm Skid Plate
Read your
installation instructions completely before beginning.
50-1105
DOCUMENT NO
. 0019
REV. A
* Cobra recommends you always wear a helmet while riding. Please never operate your motorcycle while under
the influence of alcohol and/or drugs. Enjoy the new look of your motorcycle and please ride safely.
1 - Swing Arm Skid Plate
Read your installation instructions completely before b
eginning.
50-1105
DOCUMENT NO
. 0019REV. A
Items Supplied >
4 - Bolt, Hex M8 x 20mm W/Patch
23801 E. La Palma Ave., Yorba Linda, Ca 92887 Ph. 714.692.8180 Fax. 714.692.5016
Application(s) >
HONDA TRX400EX
Instruction Manual >
1. Remove the four M8 bolts from the stock swingarm protector. Remove the swingarm protector and wipe clean any dirt or debree from the area were the swingarm skidplate will mount.
2. Install the new Cobra swingarm skidplate under the swingarm with the M8 bolts provided.
3. Torque all bolts to appropriate values.
4. Recheck for loose bolts periodically and tighten as needed.
www.cobrausa.com
12/03
Items Supplied >
23801 E. La Palma Ave., Yorba Linda, Ca 92887 Ph. 714.692.8180 Fax. 714.692.5016
Application(s) >
HONDA TRX400EX
4 - Bolt, Hex M8 x 20mm W/Patch
Instruction Manual >
1. Remove the four M8 bolts from the stock swingarm protector. Remove the swingarm protector
and wipe clean any dirt or debree from the area were the swingarm skidplate will mount.
2. Install the new Cobra swingarm skidplate under the swingarm with the M8 bolts provided.
3. Torque all bolts to appropriate values.
4. Recheck for loose bolts periodically and tighten as needed.
www.cobrausa.com
12/03
Loading...