DeWalt DCD996NT-XJ User Manual

Final page size: A5 (148mm x 210mm)

DCD991 DCD996

DEWALT

English (original instructions) 3

Fig. A

Fig. B

DCD996

Fig. C

Fig. D Fig. E

5 5

Fig. F

Fig. I

Fig. G Fig. H

DEWALT

BRUSHLESS CORDLESS 13 mm DRILL/DRIVER, DCD991 BRUSHLESS CORDLESS 13 mm DRILL/DRIVER/ HAMMERDRILL, DCD996

ENGLISH

Congratulations!

You have chosen a product development and innovation make most reliable partners for professional power toolusers.

tool. Years of experience, thorough

one of the

Technical Data

DCD991 DCD996 Voltage V Type 1/10 1/10 Battery type Li-Ion Li-Ion Power output W 820 820 No load speed Drill, Driver/Hammer

1st gear min-10–450 0–450/500 2nd gear 0–1300 0–1300/1500 3rd gear 0–2000 0–2000/2250

Impact rate

1st gear min 2nd gear – 0–25500 3rd gear – 0–38250

Max. torque (hard/soft)

hard Nm 95 95

soft Nm 66 66 Chuck capacity mm 1.5–13 1.5–13 Maximum drilling capcity

Wood mm 55 55

Metal 15 15

Masonry – 13 Weight (without battery pack) kg 1.5 1.6

Noise values and vibration values (triax vector sum) according to EN60745:

LPA (emission sound pressure

level) LWA (sound power level) dB(A) 86 108 K (uncertainty for the given

sound level)

Drilling into metal

Vibration emission value a Uncertainty K = m/s21.5 1.5

Impact drilling

Vibration emission value a Uncertainty K = m/s

dB(A) 75 97

dB(A) 3 3

= m/s2<2.5 <2.5

h,D

= m/s

h,ID

-1

18 18

– 0–8600

– 15.0 – 3.9

DCD991 DCD996

Screwdriving

Vibration emission value a Uncertainty K = m/s21.5 1.5

The vibration emission level given in this information sheet has been measured in accordance with a standardised test given in EN60745 and may be used to compare one tool with another. It may be used for a preliminary assessment ofexposure.

WARNING: The declared vibration emission level represents the main applications of the tool. However if



the tool is used for different applications, with different accessories or poorly maintained, the vibration emission may differ. This may significantly increase the exposure level over the total workingperiod.

An estimation of the level of exposure to vibration should also take into account the times when the tool is switched off or when it is running but not actually doing the job. This may significantly reduce the exposure level over the total workingperiod.

Identify additional safety measures to protect the operator from the effects of vibration such as: maintain the tool and the accessories, keep the hands warm, organisation of workpatterns.

Battery pack DCB181 DCB182 Battery type Li-Ion Li-Ion Voltage V Capacity Ah 1.5 4.0 Weight kg 0.35 0.61

Battery pack DCB183/B DCB184/B DCB185 Battery type Li-Ion Li-Ion Li-Ion Voltage V Capacity Ah 2.0 5.0 1.3 Weight kg 0.40/0.45 0.62/0.67 0.35

Battery pack DCB546 Battery type Li-Ion Voltage V Capacity Ah 6.0/2.0 Weight kg 1.05

= m/s2<2.5 <2.5

18 18

18 18 18

18/54

+ 11 hidden pages